A numerical and experimental study on the multiple fracture progression of CFRP T-joints under pull-off load

[1]  Hongguang Liu,et al.  Numerical and experimental investigation of the interface properties and failure strength of CFRP T-Stiffeners subjected to pull-off load , 2020 .

[2]  R. Butler,et al.  Novel filler materials for composite out-of-plane joints , 2019 .

[3]  M. Fotouhi,et al.  High-performance bio-inspired composite T-joints , 2019, Composites Science and Technology.

[4]  Mohammad Reza Khosravani,et al.  Influence of strain rate on fracture behavior of sandwich composite T-joints , 2019, European Journal of Mechanics - A/Solids.

[5]  R. Butler,et al.  High fidelity analysis to predict failure in T-joints , 2019, Composite Structures.

[6]  S. Hallström,et al.  Pull-off tests of CFRP T-joints with conventional and 3D reinforced fillets , 2019, Composite Structures.

[7]  J. Xiong,et al.  Progressive damage behaviour of RTM-made composite T-joint under tensile loading , 2019, Composites Part B: Engineering.

[8]  J. Kweon,et al.  Static strength of RTM composite joint with I-fiber stitching process , 2019, Composite Structures.

[9]  A. Long,et al.  Meso-scale modelling of 3D woven composite T-joints with weave variations , 2019, Composites Science and Technology.

[10]  A. Long,et al.  Experimental assessment of the mechanical behaviour of 3D woven composite T-joints , 2018, Composites Part B: Engineering.

[11]  Mohammad Reza Khosravani,et al.  Characterization of sandwich composite T-joints under different ageing conditions , 2018, Composite Structures.

[12]  Z. Aboura,et al.  Analysis of the mechanical behavior of composite t-joints reinforced by one side stitching , 2018 .

[13]  J. Reinoso,et al.  Experimental failure investigation of pull-off tests of single T-stiffened composite specimens , 2017 .

[14]  Yibo Wang,et al.  Numerical Investigation of T-joints with 3D Four Directional Braided Composite Fillers Under Tensile Loading , 2017, Applied Composite Materials.

[15]  M. W. Joosten,et al.  Prediction of mode I delamination resistance of z-pinned laminates using the embedded finite element technique , 2016 .

[16]  Puhui Chen,et al.  Influences of thickness ratios of flange and skin of composite T-joints on the reinforcement effect of Z-pin , 2016 .

[17]  A. Mouritz,et al.  Strengthening of composite T-joints using novel ply design approaches , 2016 .

[18]  S. Wen,et al.  Numerical and experimental investigation into failure of T700/bismaleimide composite T-joints under tensile loading , 2015 .

[19]  Wenteng Chen,et al.  An Inertia-Based Stabilizing Method for Quasi-Static Simulation of Unstable Crack Initiation and Propagation , 2015 .

[20]  W. Liu,et al.  A consistency-check based algorithm for element condensation in augmented finite element methods for fracture analysis , 2015 .

[21]  Stefanie Feih,et al.  Bio-inspired hierarchical design of composite T-joints with improved structural properties , 2015 .

[22]  A. Mouritz.  Structural properties of z-pinned carbon-epoxy T-joints in hot-wet environment , 2014 .

[23]  W. Liu,et al.  An efficient augmented finite element method for arbitrary cracking and crack interaction in solids , 2014 .

[24]  Yuli Chen,et al.  Three-dimensional progressive damage models for cohesively bonded composite π joint , 2014 .

[25]  Xianyue Su,et al.  An Accurate and Efficient Augmented Finite Element Method for Arbitrary Crack Interactions , 2013 .

[26]  A. Mouritz,et al.  Finite element modelling of z-pinned composite T-joints , 2012 .

[27]  A. Mouritz,et al.  Strengthening mechanics of thin and thick composite T-joints reinforced with z-pins , 2012 .

[28]  Michael R Wisnom,et al.  Influence of process induced defects on the failure of composite T-joint specimens , 2012 .

[29]  R. Morishima,et al.  Numerical analysis and experiment of composite sandwich T-joints subjected to pulling load , 2011 .

[30]  B. Cox,et al.  Predicting failure in textile composites using the Binary Model with gauge-averaging , 2010 .

[31]  A. Evans,et al.  Treating matrix nonlinearity in the binary model formulation for 3D ceramic composite structures , 2010 .

[32]  Bozhe Wang,et al.  Effect of Z-pins’ diameter, spacing and overlap length on connecting performance of CMC single lap joint , 2008 .

[33]  Qingda Yang,et al.  Cohesive models for damage evolution in laminated composites , 2005 .

[34]  Brian N. Cox,et al.  Failure in the junction region of T-stiffeners: 3D-braided vs. 2D tape laminate stiffeners , 2003 .

[35]  Norman A. Fleck,et al.  A binary model of textile composites—I. Formulation , 1994 .