Influence of output power out of a synchronous generator installed in a customer system on current limiting effects due to a fault current limiter
暂无分享,去创建一个
In this paper, it was assumed that a synchronous generator in a customer system was connected to a distribution system via the fault current limiter (FCL). We theoretically investigated the influence of the output power of the generator on the limiting effect of the fault current when a three-phase short-circuit fault occurs. It was shown that the fault current out of the customer system, limited by the FCL, rises with the output power of the generator. It was found that the larger the output, the higher the fault current at the fault point is when the limiting resistance is less than 15 Ω in the case of the resistive-type FCL. On the other hand, the fault current at the fault point decreases with an increase in the output power for a limiting resistance more than 15 Ω. In contrast, it was found that the suppressing effect on the fault current at the fault point due to the inductive-type FCL hardly depends on the output power. © 2004 Wiley Periodicals, Inc. Electr Eng Jpn, 148(3): 15–24, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/eej.10357