Levels of Capacity and Material Handling System Modeling for Factory Integration Decision Making in Semiconductor Wafer Fabs

As the costs of building a new wafer fab increase, a detailed simulation model representing the production operations, the tools, the automated material handling systems (AMHS), and the tool-AMHS interactions is needed for accurately planning the capacity of these facilities. The problem is that it currently takes too long to build, experiment, and analyze a sufficiently detailed model of a fab. The key for building accurate and computationally efficient fab models is to decide on the right amount of model details, specifically those details representing the equipment capacity and the AMHS. This paper identifies a method for classifying a fab model by the level of capacity detail, the level of AMHS detail, or the level of capacity/AMHS detail. Within the capacity/ AMHS modeling level, our method further differentiates between detailed integrated capacity/AMHS models and abstract coupled capacity/AMHS models. The proposed classification method serves as the basis of a framework that helps users select the system components to be modeled within a desired level of detail. This research also provides a review of past-published literature summarizing the work done at each of the proposed fab modeling levels. A case study comparing the performance between an integrated capacity/AMHS model and a coupled capacity/AMHS model is presented. The study demonstrates that the coupled model generates cycle time estimates that are not statistically different than those generated by the integrated model. This paper also shows that the coupled model can improve CPU time by approximately 98% in relation to the integrated model.

[1]  Richard A. Johnson,et al.  Applied Multivariate Statistical Analysis , 1983 .

[2]  Lawrence M. Wein,et al.  Scheduling semiconductor wafer fabrication , 1988 .

[3]  Hong Chen,et al.  Empirical Evaluation of a Queueing Network Model for Semiconductor Wafer Fabrication , 1988, Oper. Res..

[4]  Reha Uzsoy,et al.  A REVIEW OF PRODUCTION PLANNING AND SCHEDULING MODELS IN THE SEMICONDUCTOR INDUSTRY PART I: SYSTEM CHARACTERISTICS, PERFORMANCE EVALUATION AND PRODUCTION PLANNING , 1992 .

[5]  Vijay Mehrotra,et al.  From spreadsheets to simulations: a comparison of analysis methods for IC manufacturing performance , 1992, [1992 Proceedings] IEEE/SEMI International Semiconductor Manufacturing Science Symposium.

[6]  G. Nadoli,et al.  An Integrated Modeling Methodology for Material Handling Systems Design , 1993, Proceedings of 1993 Winter Simulation Conference - (WSC '93).

[7]  Gerald T. Mackulak,et al.  A group technology classification and coding scheme for discrete manufacturing simulation models , 1993 .

[8]  Gajanana Nadoli,et al.  An integrated modeling methodology for material handling systems design , 1993, WSC '93.

[9]  P. M. Pelagagge,et al.  Simulation tool for design and management optimization of automated interbay material handling and storage systems for large wafer fab , 1995 .

[10]  N. G. Pierce,et al.  Simulating AMHS performance for semiconductor wafer fabrication , 1995, Proceedings of International Symposium on Semiconductor Manufacturing.

[11]  David D. Yao,et al.  A queueing network model for semiconductor manufacturing , 1996 .

[12]  Pacifico M. Pelagagge,et al.  Performance analysis of automated interbay material-handling and storage systems for large Wafer Fab , 1996 .

[13]  S. S. Johal.  Non-linearity and randomness in a semiconductor wafer fab , 1996, IEEE/SEMI 1996 Advanced Semiconductor Manufacturing Conference and Workshop. Theme-Innovative Approaches to Growth in the Semiconductor Industry. ASMC 96 Proceedings.

[14]  J. Fowler,et al.  Supporting manufacturing with simulation: model design, development, and deployment , 1996, Proceedings Winter Simulation Conference.

[15]  J. D. Witte.  Using static capacity modeling techniques in semiconductor manufacturing , 1996, IEEE/SEMI 1996 Advanced Semiconductor Manufacturing Conference and Workshop. Theme-Innovative Approaches to Growth in the Semiconductor Industry. ASMC 96 Proceedings.

[16]  T. Jefferson,et al.  Simulation in the design of ground-based intrabay automation systems , 1996, Proceedings Winter Simulation Conference.

[17]  John W. Fowler,et al.  Measurable improvements in cycle-time-constrained capacity , 1997, 1997 IEEE International Symposium on Semiconductor Manufacturing Conference Proceedings (Cat. No.97CH36023).

[18]  Steven Brown.  A Centralized Approach to Factory Simulation , 1997 .

[19]  Oliver Rose.  WIP evolution of a semiconductor factory after a bottleneck workcenter breakdown , 1998, 1998 Winter Simulation Conference. Proceedings (Cat. No.98CH36274).

[20]  Navdeep S. Grewal,et al.  Integrating targeted cycle-time reduction into the capital planning process , 1998, 1998 Winter Simulation Conference. Proceedings (Cat. No.98CH36274).

[21]  Gerald T. Mackulak,et al.  Soft stimulation crucial for new automated fab decisions , 1998 .

[22]  Steven Brown,et al.  A rapid modeling technique for measurable improvements in factory performance , 1998, 1998 Winter Simulation Conference. Proceedings (Cat. No.98CH36274).

[23]  Gerald T. Mackulak,et al.  Simulation analysis of 300 mm intrabay automation vehicle capacity alternatives , 1998, IEEE/SEMI 1998 IEEE/SEMI Advanced Semiconductor Manufacturing Conference and Workshop (Cat. No.98CH36168).

[24]  Gerald T. Mackulak,et al.  Effective simulation model reuse: a case study for AMHS modeling , 1998, 1998 Winter Simulation Conference. Proceedings (Cat. No.98CH36274).

[25]  Gerald T. Mackulak,et al.  A comparison of the exponential and the hyperexponential distributions for modeling move requests in a semiconductor fab , 1999, WSC '99.

[26]  Robert Wright,et al.  300mm factory layout and automated materials handling , 1999 .

[27]  I. Paprotny,et al.  Increasing first pass accuracy of AMHS simulation output using legacy data , 1999, WSC'99. 1999 Winter Simulation Conference Proceedings. 'Simulation - A Bridge to the Future' (Cat. No.99CH37038).

[28]  Gerald T. Mackulak,et al.  Reducing model creation cycle time by automated conversion of a CAD AMHS layout design , 1999, WSC '99.

[29]  Paul A. Fishwick,et al.  OOPM/RT: a multimodeling methodology for real-time simulation , 1999, TOMC.

[30]  N.S. Grewal,et al.  Validating simulation model cycle times at Seagate Technology , 1999, WSC'99. 1999 Winter Simulation Conference Proceedings. 'Simulation - A Bridge to the Future' (Cat. No.99CH37038).

[31]  R. C. Leachman,et al.  Reduced simulation models of wafer fabrication facilities , 1999 .

[32]  Oliver Rose,et al.  Why do simple wafer fab models fail in certain scenarios? , 2000, 2000 Winter Simulation Conference Proceedings (Cat. No.00CH37165).

[33]  Gerald T. Mackulak,et al.  A simulation-based cost modeling methodology for evaluation of interbay material handling in a semiconductor wafer fab , 2000, 2000 Winter Simulation Conference Proceedings (Cat. No.00CH37165).

[34]  Gerald T. Mackulak,et al.  Simulation based comparison of semiconductor AMHS alternatives: continuous flow vs. overhead monorail , 2000, 2000 Winter Simulation Conference Proceedings (Cat. No.00CH37165).

[35]  Chad D. DeJong,et al.  Integrating dynamic fab capacity and automation models for 300 mm semiconductor manufacturing , 2000, 2000 Winter Simulation Conference Proceedings (Cat. No.00CH37165).

[36]  Roland Sturm,et al.  Simulation based decision support for future 300 mm automated material handling , 2000, 2000 Winter Simulation Conference Proceedings (Cat. No.00CH37165).

[37]  Robert J. Gaskins,et al.  Automated material handling system traffic control by means of node balancing , 2000, 2000 Winter Simulation Conference Proceedings (Cat. No.00CH37165).

[38]  N. Bahri,et al.  A comparison of unified vs. segregated automated material handling systems for 300 mm fabs , 2001, 2001 IEEE International Symposium on Semiconductor Manufacturing. ISSM 2001. Conference Proceedings (Cat. No.01CH37203).

[39]  Fu-Kwun Wang,et al.  Simulation analysis of dispatching rules for an automated interbay material handling system in wafer fab , 2001 .

[40]  Lars Mönch,et al.  Simulation-based solution of load-balancing problems in the photolithography area of a semiconductor wafer fabrication facility , 2001, Proceeding of the 2001 Winter Simulation Conference (Cat. No.01CH37304).

[41]  Gerald T. Mackulak,et al.  A simulation-based experiment for comparing AMHS performance in a semiconductor fabrication facility , 2001 .

[42]  Gerald T. Mackulak,et al.  Efficient cycle time-throughput curve generation using a fixed sample size procedure , 2001 .

[43]  Yon Chun Chou,et al.  Resource Portfolio Planning Methodology for Semiconductor Wafer Manufacturing , 2001 .

[44]  J. Si,et al.  Understanding a semiconductor process using a full-scale model , 2002 .

[45]  Chad D. DeJong,et al.  Simulating the transport and scheduling of priority lots in semiconductor factories , 2002, Proceedings of the Winter Simulation Conference.

[46]  WALLACE J. HOPP,et al.  Using an optimized queueing network model to support wafer fab design , 2002 .

[47]  W. Hopp,et al.  Using an optimized queueing network model to support wafer fab design , 2002 .

[48]  Miki Fukunari,et al.  Data-based node penalties in a path-finding algorithm in an automated material handling system , 2002, Proceedings of the Winter Simulation Conference.

[49]  Edward A. MacNair,et al.  300 mm wafer fabrication line simulation model , 2002, Proceedings of the Winter Simulation Conference.

[50]  Lee W. Schruben,et al.  Fast Simulations of Large-Scale Highly Congested Systems , 2003, Simul..

[51]  E. A. MacNair,et al.  Application of cluster tool modeling to a 300 mm fab simulation , 2003, Proceedings of the 2003 Winter Simulation Conference, 2003..

[52]  John W. Fowler,et al.  Capacity Loss Factors in Semiconductor Manufacturing , 2003 .

[53]  Lars Mönch,et al.  A Simulation Framework for the Performance Assessment of Shop-Floor Control Systems , 2003, Simul..

[54]  Fu-Kwun Wang,et al.  Simulation analysis of the connecting transport AMHS in a wafer fab , 2003 .

[55]  Barbara Culhane.  Brooks Automation , 2005, WSC '05.