Experimental metrics of the powder layer quality in the selective laser sintering process

[1]  J. Gardy,et al.  An investigation on effect of powder flowability on the powder spreading in additive manufacturing , 2022, Powder Technology.

[2]  A. Hassanpour,et al.  A new approach to quantify powder's bed surface roughness in additive manufacturing , 2022, Powder Technology.

[3]  Wenguang Nan,et al.  Experimental investigation on the spreadability of cohesive and frictional powder , 2022, Advanced Powder Technology.

[4]  J. Frank,et al.  Novel testing device and routine to characterise the spreadability of powders for powder bed fusion processes – a problem-oriented approach , 2022, Powder Metallurgy.

[5]  Ryan W. Penny,et al.  Mechanized spreading of ceramic powder layers for additive manufacturing characterized by transmission x-ray imaging: Influence of powder feedstock and spreading parameters on powder layer density , 2021, Powder Technology.

[6]  J. Bao,et al.  Preparation and properties of styrene ethylene butylene styrene / polypropylene thermoplastic elastomer powder for selective laser sintering 3D printing , 2021 .

[7]  Daijun Zhang,et al.  Characterization of thermally treated polypropylene powders with wide sintering window for powder bed fusion of polymers , 2021 .

[8]  K. Dong,et al.  Dynamic investigation on the powder spreading during selective laser melting additive manufacturing , 2020 .

[9]  D. Barletta,et al.  Flow properties of polymeric powders for selective laser sintering , 2020 .

[10]  Wentao Yan,et al.  Packing quality of powder layer during counter-rolling-type powder spreading process in additive manufacturing , 2020 .

[11]  D. Barletta,et al.  A quantitative approach to assess high temperature flow properties of a PA 12 powder for laser sintering , 2020 .

[12]  Wenguang Nan,et al.  A simple method for assessing powder spreadability for additive manufacturing , 2020, Powder Technology.

[13]  T. Tinga,et al.  Measuring the spreadability of pre-treated and moisturized powders for laser powder bed fusion , 2020 .

[14]  Wenguang Nan,et al.  Cohesive Powder Flow: Trends and Challenges in Characterisation and Analysis , 2020, KONA Powder and Particle Journal.

[15]  Yajiang Huang,et al.  Laser sintering of cryogenically ground polymer powders into high-performance parts: The role of dry particle coating with a conductive flow agent , 2020 .

[16]  E. Fereiduni,et al.  Characterization of Composite Powder Feedstock from Powder Bed Fusion Additive Manufacturing Perspective , 2019, Materials.

[17]  Sanjay B. Joshi,et al.  On the development of powder spreadability metrics and feedstock requirements for powder bed fusion additive manufacturing , 2019, Additive Manufacturing.

[18]  A. Santomaso,et al.  Chapter 4. Bulk Powder Flow Characterisation Techniques , 2019, Powder Flow.

[19]  Y. Shin,et al.  Additive manufacturing of Ti6Al4V alloy: A review , 2019, Materials & Design.

[20]  Wenguang Nan,et al.  Numerical simulation of powder flow during spreading in additive manufacturing , 2019, Powder Technology.

[21]  N. Parab,et al.  Revealing particle-scale powder spreading dynamics in powder-bed-based additive manufacturing process by high-speed x-ray imaging , 2018, Scientific Reports.

[22]  Wenguang Nan,et al.  Jamming during particle spreading in additive manufacturing , 2018, Powder Technology.

[23]  N. N. Kumbhar,et al.  Post Processing Methods used to Improve Surface Finish of Products which are Manufactured by Additive Manufacturing Technologies: A Review , 2018 .

[24]  A. Kashani,et al.  Additive manufacturing (3D printing): A review of materials, methods, applications and challenges , 2018, Composites Part B: Engineering.

[25]  Zhongwei Li,et al.  Flow behavior of powder particles in layering process of selective laser melting: Numerical modeling and experimental verification based on discrete element method , 2017 .

[26]  Sina Haeri,et al.  Optimisation of blade type spreaders for powder bed preparation in Additive Manufacturing using DEM simulations , 2017 .

[27]  A. Bandyopadhyay,et al.  Additive manufacturing: scientific and technological challenges, market uptake and opportunities , 2017 .

[28]  T. Bauer,et al.  Powder flowability characterisation methodology for powder-bed-based metal additive manufacturing , 2016 .

[29]  P. Puyvelde,et al.  Assessing polymer powder flow for the application of laser sintering , 2015 .

[30]  J. Kruth,et al.  Rheological behavior of β-Ti and NiTi powders produced by atomization for SLM production of open porous orthopedic implants , 2015 .

[31]  D. Barletta,et al.  The High Temperature Annular Shear Cell: A modified ring shear tester to measure the flow properties of powders at high temperature , 2013 .

[32]  Kaufui Wong,et al.  A Review of Additive Manufacturing , 2012 .

[33]  Nicolas Vandewalle,et al.  Measuring the flowing properties of powders and grains , 2012 .

[34]  R. Hague,et al.  Laser sintering of polyamides and other polymers , 2012 .

[35]  S. Haeri,et al.  Discrete element simulation and experimental study of powder spreading process in additive manufacturing , 2017 .

[36]  D. Barletta,et al.  Validation of an Experimental Procedure to Quantify The Effects of Powder Spreadability on Selective Laser Sintering Process , 2017 .

[37]  Ruth D. Goodridge,et al.  An experimental study into the effects of bulk and flow behaviour of laser sintering polymer powders on resulting part properties , 2015 .

[38]  M. Schmid,et al.  Flowability of SLS powders at elevated temperature , 2014 .

[39]  G. Levy,et al.  Flowability of Powders for Selective Laser Sintering (SLS) investigated by Round Robin Test , 2014 .

[40]  Konrad Wegener,et al.  Advances in SLS Powder Characterization , 2011 .

[41]  James Prescott,et al.  On powder flowability , 2000 .