A Critical Comparison of Alternative Risk Priority Numbers in Failure Modes, Effects, and Criticality Analysis
暂无分享,去创建一个
[1] John Bowles,et al. An assessment of RPN prioritization in a failure modes effects and criticality analysis , 2003, Annual Reliability and Maintainability Symposium, 2003..
[2] Chen-Tung Chen,et al. Extensions of the TOPSIS for group decision-making under fuzzy environment , 2000, Fuzzy Sets Syst..
[3] Bo Wan,et al. An improved cost-based method of Risk Priority Number , 2012, Proceedings of the IEEE 2012 Prognostics and System Health Management Conference (PHM-2012 Beijing).
[4] Hong-Zhong Huang,et al. FMECA for aircraft electric system , 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.
[5] Ching-Hsue Cheng,et al. Evaluating the risk of failure using the fuzzy OWA and DEMATEL method , 2011, J. Intell. Manuf..
[6] T. R. Moss,et al. Criticality analysis revisited , 1999 .
[7] K. Palanikumar,et al. Modified Prioritization Methodology for Risk Priority Number in Failure Mode and Effects Analysis , 2013 .
[8] Gionata Carmignani,et al. An integrated structural framework to cost-based FMECA: The priority-cost FMECA , 2009, Reliab. Eng. Syst. Saf..
[9] Celso Marcelo Franklin Lapa,et al. Effects analysis fuzzy inference system in nuclear problems using approximate reasoning , 2004 .
[10] Francesco Zammori,et al. ANP/RPN: a multi criteria evaluation of the Risk Priority Number , 2012, Qual. Reliab. Eng. Int..
[11] Jian-Bo Yang,et al. Risk evaluation in failure mode and effects analysis using fuzzy weighted geometric mean , 2009, Expert Syst. Appl..
[12] Krishna R. Pattipati,et al. Fault Diagnosis of Components and Sensors in HVAC Air Handling Systems With New Types of Faults , 2018, IEEE Access.
[13] Silvia Carpitella,et al. A combined multi-criteria approach to support FMECA analyses: A real-world case , 2018, Reliab. Eng. Syst. Saf..
[14] Marcantonio Catelani,et al. A condition monitoring tool based on a FMECA and FMMEA combined approach in Oil&Gas applications , 2016, 2016 IEEE International Instrumentation and Measurement Technology Conference Proceedings.
[15] Mariarosa Giardina,et al. Safety study of an LNG regasification plant using an FMECA and HAZOP integrated methodology , 2015 .
[16] Mehdi Tavakolan,et al. Construction project risk assessment using combined fuzzy and FMEA , 2013, 2013 Joint IFSA World Congress and NAFIPS Annual Meeting (IFSA/NAFIPS).
[17] Jin Tian,et al. Failure mode prioritization by improved RPN calculation method , 2014, 2014 Reliability and Maintainability Symposium.
[18] Sanjay Kumar Chaturvedi,et al. Criticality Assessment Models for Failure Mode Effects and Criticality Analysis Using Fuzzy Logic , 2011, IEEE Transactions on Reliability.
[19] Ali Kokangul,et al. Classical and fuzzy FMEA risk analysis in a sterilization unit , 2016, Comput. Ind. Eng..
[20] Nancy J. Lindsey. An innovative Goddard Space Flight Center methodology for using FMECA as a risk assessment and communication tool , 2016, 2016 Annual Reliability and Maintainability Symposium (RAMS).
[21] R. Y. Trianto,et al. FMECA development in PLN TRANS-JBTB , 2017, 2017 International Conference on High Voltage Engineering and Power Systems (ICHVEPS).
[22] Indra Gunawan,et al. Applying UGF Concept to Enhance the Assessment Capability of FMEA , 2016, Qual. Reliab. Eng. Int..
[23] Rossella Onofrio,et al. Failure Mode, Effects and Criticality Analysis (FMECA) for Medical Devices: Does Standardization Foster Improvements in the Practice? , 2015 .
[24] M. Ferdosi,et al. Revised Risk Priority Number in Failure Mode and Effects Analysis Model from the Perspective of Healthcare System , 2018, International journal of preventive medicine.
[25] Z. Blivband,et al. Expanded FMEA (EFMEA) , 2004, Annual Symposium Reliability and Maintainability, 2004 - RAMS.
[26] Yung-Chia Chang,et al. Applying the concept of exponential approach to enhance the assessment capability of FMEA , 2014, J. Intell. Manuf..
[27] Jin Wang,et al. Modified failure mode and effects analysis using approximate reasoning , 2003, Reliab. Eng. Syst. Saf..
[28] Zhu Wang,et al. Use-related risk analysis for medical devices based on improved FMEA. , 2012, Work.
[29] Celso Marcelo Franklin Lapa,et al. Fuzzy FMEA applied to PWR chemical and volume control system , 2004 .
[30] Joseph Kuitche,et al. Determination of Dominant Failure Modes Using FMECA on the Field Deployed c-Si Modules Under Hot-Dry Desert Climate , 2015, IEEE Journal of Photovoltaics.
[31] Ikuobase Emovon,et al. An integrated multicriteria decision making methodology using compromise solution methods for prioritising risk of marine machinery systems , 2015 .
[32] Marcantonio Catelani,et al. Failure modes, mechanisms and effect analysis on temperature redundant sensor stage , 2018, Reliab. Eng. Syst. Saf..
[33] Rong Pan,et al. Investigation of Dominant Failure Mode(s) for Field-Aged Crystalline Silicon PV Modules Under Desert Climatic Conditions , 2014, IEEE Journal of Photovoltaics.
[34] Ahmet Can Kutlu,et al. Fuzzy failure modes and effects analysis by using fuzzy TOPSIS-based fuzzy AHP , 2012, Expert Syst. Appl..
[35] Celso Marcelo Franklin Lapa,et al. Hazard and operability study using approximate reasoning in light-water reactors passive systems , 2006 .
[36] Marcello Braglia,et al. MAFMA: multi‐attribute failure mode analysis , 2000 .
[37] Felix T. S. Chan,et al. AMWRPN: Ambiguity Measure Weighted Risk Priority Number Model for Failure Mode and Effects Analysis , 2018, IEEE Access.
[38] Sohag Kabir,et al. A review of applications of fuzzy sets to safety and reliability engineering , 2018, Int. J. Approx. Reason..
[39] Sunil Kumar,et al. Heating, ventilating, and air conditioning handbook for design and implementation , 2007 .
[40] Marcello Braglia,et al. Fuzzy TOPSIS approach for failure mode, effects and criticality analysis , 2003 .
[41] Jin Wang,et al. Fuzzy Rule-Based Bayesian Reasoning Approach for Prioritization of Failures in FMEA , 2008, IEEE Transactions on Reliability.
[42] Antonella Certa,et al. ELECTRE TRI-based approach to the failure modes classification on the basis of risk parameters: An alternative to the risk priority number , 2017, Comput. Ind. Eng..
[43] Hongzhong Huang,et al. Fuzzy criticality assessment of FMECA for the SADA based on modified FWGM algorithm & centroid deffuzzification , 2011, 2011 International Conference on Quality, Reliability, Risk, Maintenance, and Safety Engineering.
[44] R. C. Bromley,et al. Failure modes, effects and criticality analysis (FMECA) , 1994 .
[45] Gülsen Aydin Keskin,et al. An alternative evaluation of FMEA: Fuzzy ART algorithm , 2009, Qual. Reliab. Eng. Int..
[46] Kuei-Hu Chang,et al. Evaluate the orderings of risk for failure problems using a more general RPN methodology , 2009, Microelectron. Reliab..
[47] Zaifang Zhang,et al. Risk prioritization in failure mode and effects analysis under uncertainty , 2011, Expert Syst. Appl..
[48] Marcello Braglia,et al. Fuzzy criticality assessment model for failure modes and effects analysis , 2003 .
[50] Ming-Hung Shu,et al. Extended FMEA for Sustainable Manufacturing: An Empirical Study in the Non-Woven Fabrics Industry , 2016 .
[51] Yu-Mei Niu,et al. The optimization of RPN criticality analysis method in FMECA , 2009, 2009 International Conference on Apperceiving Computing and Intelligence Analysis.
[52] Chee Peng Lim,et al. Application of a Genetic-Fuzzy FMEA to Rainfed Lowland Rice Production in Sarawak: Environmental, Health, and Safety Perspectives , 2018, IEEE Access.
[53] Dinesh Kumar,et al. Systematic failure mode effect analysis (FMEA) using fuzzy linguistic modelling , 2005 .
[54] Rapinder Sawhney,et al. A modified FMEA approach to enhance reliability of lean systems , 2010 .
[55] F Castiglia,et al. Risk assessment of component failure modes and human errors using a new FMECA approach: application in the safety analysis of HDR brachytherapy , 2014, Journal of radiological protection : official journal of the Society for Radiological Protection.
[56] Xu Gang,et al. Test and Improvement of Ventilation Cooling System for High-Speed Train , 2010, 2010 International Conference on Optoelectronics and Image Processing.
[57] J. B. Bowles,et al. Fuzzy logic prioritization of failures in a system failure mode, effects and criticality analysis , 1995 .