Self-locking degree-4 vertex origami structures

A generic degree-4 vertex (4-vertex) origami possesses one continuous degree-of-freedom for rigid folding, and this folding process can be stopped when two of its facets bind together. Such facet-binding will induce self-locking so that the overall structure stays at a pre-specified configuration without additional locking elements or actuators. Self-locking offers many promising properties, such as programmable deformation ranges and piecewise stiffness jumps, that could significantly advance many adaptive structural systems. However, despite its excellent potential, the origami self-locking features have not been well studied, understood, and used. To advance the state of the art, this research conducts a comprehensive investigation on the principles of achieving and harnessing self-locking in 4-vertex origami structures. Especially, for the first time, this study expands the 4-vertex structure construction from single-component to dual-component designs and investigates their self-locking behaviours. By exploiting various tessellation designs, this research discovers that the dual-component designs offer the origami structures with extraordinary attributes that the single-component structures do not have, which include the existence of flat-folded locking planes, programmable locking points and deformability. Finally, proof-of-concept experiments investigate how self-locking can effectively induce piecewise stiffness jumps. The results of this research provide new scientific knowledge and a systematic framework for the design, analysis and utilization of self-locking origami structures for many potential engineering applications.

[1]  Dongping Deng,et al.  Origami-Based Self-Folding Structure Design and Fabrication Using Projection Based Stereolithography , 2015 .

[2]  Jian Xu,et al.  Locking mechanisms in degree-4 vertex origami structures , 2016, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[3]  Francesco dell’Isola,et al.  Hencky-type discrete model for pantographic structures: numerical comparison with second gradient continuum models , 2016 .

[4]  Thomas C. Hull,et al.  Origami structures with a critical transition to bistability arising from hidden degrees of freedom. , 2015, Nature materials.

[5]  K. W. Wang,et al.  Recoverable and Programmable Collapse from Folding Pressurized Origami Cellular Solids. , 2016, Physical review letters.

[6]  K W Wang,et al.  Fluidic origami with embedded pressure dependent multi-stability: a plant inspired innovation , 2015, Journal of The Royal Society Interface.

[7]  E. Demaine,et al.  Self-folding with shape memory composites† , 2013 .

[8]  Samuel M. Felton,et al.  A method for building self-folding machines , 2014, Science.

[9]  Joseph M. Gattas,et al.  Geometric assembly of rigid-foldable morphing sandwich structures , 2015 .

[10]  Yan Chen,et al.  Axial crushing of thin-walled structures with origami patterns , 2012 .

[11]  Jean-François Molinari,et al.  Avalanches in dry and saturated disordered media at fracture. , 2016, Physical review. E.

[12]  Thomas C. Hull.  Project Origami: Activities for Exploring Mathematics , 2006 .

[13]  D. Greenaway,et al.  Synthesis and review , 1999 .

[14]  Jiayao Ma,et al.  Energy Absorption of Thin-Walled Square Tubes With a Prefolded Origami Pattern—Part I: Geometry and Numerical Simulation , 2014 .

[15]  Tomohiro Tachi,et al.  Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials , 2015, Proceedings of the National Academy of Sciences.

[16]  Dimitris C. Lagoudas,et al.  Design and Analysis of a Self-Folding SMA-SMP Composite Laminate , 2014 .

[17]  K. Kuribayashi,et al.  Self-deployable origami stent grafts as a biomedical application of Ni-rich TiNi shape memory alloy foil , 2006 .

[18]  D. Gracias,et al.  Surface tension-driven self-folding polyhedra. , 2007, Langmuir : the ACS journal of surfaces and colloids.

[19]  Arthur Lebée,et al.  From Folds to Structures, a Review , 2015 .

[20]  Thomas C. Hull,et al.  Using origami design principles to fold reprogrammable mechanical metamaterials , 2014, Science.

[21]  Goran Konjevod,et al.  Origami based Mechanical Metamaterials , 2014, Scientific Reports.

[22]  Keith A. Seffen,et al.  Review of Inflatable Booms for Deployable Space Structures: Packing and Rigidization , 2014 .

[23]  Jinkyu Yang,et al.  Reentrant Origami-Based Metamaterials with Negative Poisson's Ratio and Bistability. , 2015, Physical review letters.

[24]  Mary Frecker,et al.  Design of contact-aided compliant cellular mechanisms with curved walls , 2012 .

[25]  Mark Schenk,et al.  Geometry of Miura-folded metamaterials , 2013, Proceedings of the National Academy of Sciences.

[26]  George M. Whitesides,et al.  A three-dimensional actuated origami-inspired transformable metamaterial with multiple degrees of freedom , 2016, Nature Communications.

[27]  Rui Peng,et al.  Origami of thick panels , 2015, Science.

[28]  B. Chen,et al.  Origami multistability: from single vertices to metasheets. , 2014, Physical review letters.

[29]  G. Whitesides,et al.  Elastomeric Origami: Programmable Paper‐Elastomer Composites as Pneumatic Actuators , 2012 .

[30]  Larry L. Howell,et al.  An Offset Panel Technique for Thick Rigidily Foldable Origami , 2014 .

[31]  M. Frecker,et al.  Stress Relief in Contact-Aided Compliant Cellular Mechanisms , 2009 .

[32]  Dimitris C. Lagoudas,et al.  Origami-inspired active structures: a synthesis and review , 2014 .

[33]  Martin van Hecke,et al.  Origami building blocks : generic and special 4-vertices , 2018 .

[34]  Takeshi Masui,et al.  Vertical vibration isolator having piecewise‐constant restoring force , 2009 .

[35]  Andres F. Arrieta,et al.  Variable stiffness material and structural concepts for morphing applications , 2013 .

[36]  Hai-Jun Su,et al.  Programmable motion of DNA origami mechanisms , 2015, Proceedings of the National Academy of Sciences.

[37]  Suyi Li,et al.  Fluidic origami cellular structure -- combining the plant nastic movements with paper folding art , 2015, Smart Structures.

[38]  Pedro M Reis,et al.  Transforming architectures inspired by origami , 2015, Proceedings of the National Academy of Sciences.

[39]  Jamie Kyujin Paik,et al.  The design and control of the multi-modal locomotion origami robot, Tribot , 2015, 2015 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS).

[40]  F. dell’Isola,et al.  Large deformations of planar extensible beams and pantographic lattices: heuristic homogenization, experimental and numerical examples of equilibrium , 2016, Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences.

[41]  Kon-Well Wang,et al.  Fluidic origami: a plant-inspired adaptive structure with shape morphing and stiffness tuning , 2015 .

[42]  Bill Goodwine,et al.  A review of origami applications in mechanical engineering , 2016 .

[43]  Evin Gultepe,et al.  Self-folding devices and materials for biomedical applications. , 2012, Trends in biotechnology.

[44]  M. van Hecke,et al.  Origami building blocks: Generic and special four-vertices. , 2015, Physical review. E.

[45]  Hongbin Fang,et al.  Uncovering the deformation mechanisms of origami metamaterials by introducing generic degree-four vertices. , 2016, Physical review. E.

[46]  R. Jazar,et al.  Comparison of Exact and Approximate Frequency Response of a Piecewise Linear Vibration Isolator , 2005 .

[47]  Tomohiro Tachi,et al.  Rigid-Foldable Thick Origami , 2010 .

[48]  Yanmin Mu,et al.  Zero Mach number limit of the compressible Hall-magnetohydrodynamic equations , 2016 .