论文信息 - Modeling the Transient Temperature Distribution within a Hydrogen Cylinder during Refueling

Modeling the Transient Temperature Distribution within a Hydrogen Cylinder during Refueling

We report a simplified 2-dimensional axisymmetric model for predicting the gas temperature and pressure rise in a hydrogen cylinder during the fill process. The model predictions were compared with in-situ measurements of the average temperature rise and temperature distribution inside a type 3, 74 L hydrogen cylinder filled to 35 MPa.

W. Mérida | C. Dicken | C. J. B. Dicken | W. Mérida

[1] I. Tiselj,et al. WALL PROPERTIES AND HEAT TRANSFER IN NEAR-WALL TURBULENT FLOW , 2004 .

[2] S. G. Penoncello,et al. Thermodynamic Properties of Cryogenic Fluids , 1997 .

[3] Ishwar K. Puri,et al. Advanced Thermodynamics Engineering , 2001 .

[4] William E. Liss,et al. Fast Filling of NGV Fuel Containers , 1999 .

[5] NUMERICAL INVESTIGATION OF JET IMPINGEMENT WITH CROSS FLOW—COMPARISON OF YANG-SHIH AND STANDARD k–ϵ TURBULENCE MODELS , 2005 .

[7] K. J. Kountz. Modeling the fast fill process in natural gas vehicle storage cylinders , 1994 .

[8] B. Launder,et al. Lectures in mathematical models of turbulence , 1972 .

[9] Walter Mérida,et al. Measured effects of filling time and initial mass on the temperature distribution within a hydrogen cylinder during refuelling , 2007 .

[10] J. Abraham,et al. THE k-ε MODEL AND COMPUTED SPREADING RATES IN ROUND AND PLANE JETS , 2001 .

[11] Stephen B. Pope,et al. An explanation of the turbulent round-jet/plane-jet anomaly , 1978 .

[12] Jean-Pierre Corriou,et al. A simplified model for real gas expansion between two reservoirs connected by a thin tube , 1996 .

[13] P. G. Hill,et al. Turbulent Transient Gas Injections , 2000 .

[14] G. Yadigaroglu,et al. A simplified model for depressurization of gas-filled pressure vessels , 1993 .