Micro check valves for integration into polymeric microfluidic devices

In this paper we describe the design, simulation, fabrication and characterization of micro check valves suitable for integration into polymeric microfluidic devices such as micropumps or test cartridges for biomedical analysis. The valves are fabricated by a polymeric surface micromachining process, which utilizes SU-8 as the functional material. The devices are assembled with the lamination technique. A micro check valve consists of three layers: an inlet layer, a valve layer and an outlet layer. The valve is a disc with a diameter of 1 mm. The disc is suspended on folded beams, which act as valve springs. Both valve disc and springs are fabricated in a 100 µm SU-8 layer. The valves prove a clear flow rectification function. Relatively low pressure is required for opening the valve. The valves were tested and characterized with water. One of the valves is successfully integrated into a polymeric micropump. These valves prove the facile and reliable lamination technology for the fabrication of complex polymeric microfluidic devices for biomedical analysis.

[1]  P. Bergveld,et al.  A plastic micropump constructed with conventional techniques and materials , 1999 .

[2]  Elisabeth Verpoorte,et al.  Application of surface biopassivated disposable poly(dimethylsiloxane)/glass chips to a heterogeneous competitive human serum immunoglobulin G immunoassay with incorporated internal standard , 2002, Electrophoresis.

[3]  Kenneth E. Rudd,et al.  EcoGene: a genome sequence database for Escherichia coli K-12 , 2000, Nucleic Acids Res..

[4]  Nam-Trung Nguyen,et al.  MEMS-Micropumps: A Review , 2002 .

[5]  Arthur Brunnschweiler,et al.  Coupled FEM simulation for the characterization of the fluid flow within a micromachined cantilever valve , 1996 .

[6]  Larry L. Howell,et al.  Ortho-planar linear-motion springs , 2001 .

[7]  Nam-Trung Nguyen,et al.  A fully polymeric micropump with piezoelectric actuator , 2004 .

[8]  Richard A Mathies,et al.  High throughput DNA sequencing with a microfabricated 96-lane capillary array electrophoresis bioprocessor , 2002, Proceedings of the National Academy of Sciences of the United States of America.

[9]  M. Despont,et al.  SU-8: a low-cost negative resist for MEMS , 1997 .

[10]  Masayoshi Esashi,et al.  Microflow devices and systems , 1994 .

[11]  William H. Grover,et al.  Monolithic membrane valves and diaphragm pumps for practical large-scale integration into glass microfluidic devices , 2003 .

[12]  Kurt E. Petersen,et al.  Simulation of microfluidic pumping in a genomic DNA blood-processing cassette , 2003 .

[13]  N. Nguyen,et al.  Fundamentals and Applications of Microfluidics , 2002 .

[14]  J. Ulrich,et al.  Static and dynamic flow simulation of a KOH-etched microvalve using the finite-element method , 1996 .

[15]  Werner Karl Schomburg,et al.  LIGA micropump for gases and liquids , 1994 .

[16]  Jeffery H. Fenton,et al.  A miniature integrated device for automated multistep genetic assays. , 2000, Nucleic acids research.

[17]  Igor L. Medintz,et al.  High-performance multiplex SNP analysis of three hemochromatosis-related mutations with capillary array electrophoresis microplates. , 2001, Genome research.

[18]  W. Menz,et al.  Microfluidic components in LIGA technique , 1994 .

[19]  William J. Benett,et al.  Polymer-Based Packaging Platform for Hybrid Microfluidic Systems , 2002 .

[20]  Richard J. Colton,et al.  Hybrid macro–micro fluidics system for a chip-based biosensor , 2002 .