Leg mechanisms for hydraulically actuated robots

The performance of highly dynamic robotic machines is directly associated with both the actuation means and the specific mechanical properties/configuration of the system. Hydraulic actuation demonstrates significant competitive advantages when minimum weight and volume, large forces and wide range of speeds are required and this makes it very suitable for systems such as legged robots. The geometry and design of leg mechanisms have great effect on the actuation system performance such as the required flow, which directly determines the size/weight and power density, in turn affecting the performance of the robot. This paper describes the mechanism and operation principle of two 2-DOF legs considered for HyQ, a hydraulically actuated quadruped robot [1]. Numerical studies have been done to investigate the required flow, the pressure in the actuator chambers and the efficiency of the two leg mechanisms. The results show that the second leg design reduces the required flow significantly with less pressure-jump in the actuator and higher efficiency.