Failure of heterogeneous materials: 3D meso‐scale FE models with embedded discontinuities

We present a meso-scale model for failure of heterogeneous quasi-brittle materials. The model problem of heterogeneous materials that is addressed in detail is based on two-phase 3D representation of reinforced heterogeneous materials, such as concrete, where the inclusions are melt within the matrix. The quasi-brittle failure mechanisms are described by the spatial truss representation, which is defined by the chosen Voronoi mesh. In order to explicitly incorporate heterogeneities with no need to change this mesh, some bar elements are cut by the phase-interface and must be split into two parts. Any such element is enhanced using both weak and strong discontinuities, based upon the Incompatible Mode Method. Furthermore, a dedicated operator split solution procedure is proposed to keep local any additional computation on elements with embedded discontinuities. The results for several numerical simulations are presented to illustrate the capabilities of the proposed model to provide an excellent representation of failure mechanisms for any different macroscopic loading path. Copyright © 2010 John Wiley & Sons, Ltd.

[1]  J. C. Simo,et al.  A CLASS OF MIXED ASSUMED STRAIN METHODS AND THE METHOD OF INCOMPATIBLE MODES , 1990 .

[2]  E. Wilson.  The static condensation algorithm , 1974 .

[3]  Adnan Ibrahimbegovic,et al.  Classical plasticity and viscoplasticity models reformulated: theoretical basis and numerical implementation , 1998 .

[4]  Adnan Ibrahimbegovic,et al.  Embedded discontinuity finite element method for modeling of localized failure in heterogeneous materials with structured mesh: an alternative to extended finite element method , 2007 .

[5]  M. Klisinski,et al.  FINITE ELEMENT WITH INNER SOFTENING BAND , 1991 .

[6]  David P. Dobkin,et al.  The quickhull algorithm for convex hulls , 1996, TOMS.

[7]  L. J. Sluys,et al.  Analysis of slip planes in three-dimensional solids , 2001 .

[8]  T. Belytschko,et al.  Extended finite element method for cohesive crack growth , 2002 .

[9]  Ted Belytschko,et al.  Multiscale aggregating discontinuities: A method for circumventing loss of material stability , 2008 .

[10]  Sergiy Melnyk,et al.  Failure model for heterogeneous structures using structured meshes and accounting for probability aspects , 2009 .

[11]  R. de Borst,et al.  Simulating the propagation of displacement discontinuities in a regularized strain‐softening medium , 2002 .

[12]  Edward L. Wilson,et al.  A modified method of incompatible modes , 1991 .

[13]  T. Belytschko,et al.  A finite element with embedded localization zones , 1988 .

[14]  J. Oliver.  MODELLING STRONG DISCONTINUITIES IN SOLID MECHANICS VIA STRAIN SOFTENING CONSTITUTIVE EQUATIONS. PART 1: FUNDAMENTALS , 1996 .

[15]  T. Belytschko,et al.  Analysis of three‐dimensional crack initiation and propagation using the extended finite element method , 2005 .

[16]  G. Lilliu,et al.  On the relative use of micro-mechanical lattice analysis of 3-phase particle composites , 2007 .

[17]  Adnan Ibrahimbegovic,et al.  Microscale and mesoscale discrete models for dynamic fracture of structures built of brittle material , 2003 .

[18]  Ted Belytschko,et al.  Elastic crack growth in finite elements with minimal remeshing , 1999 .

[19]  A. Huespe,et al.  A comparative study on finite elements for capturing strong discontinuities: E-FEM vs X-FEM , 2006 .

[20]  J. C. Simo,et al.  An analysis of strong discontinuities induced by strain-softening in rate-independent inelastic solids , 1993 .

[21]  M. Ostoja-Starzewski.  Material spatial randomness: From statistical to representative volume element☆ , 2006 .

[22]  L. J. Sluys,et al.  Application of embedded discontinuities for softening solids , 2000 .

[23]  A. Huespe,et al.  From continuum mechanics to fracture mechanics: the strong discontinuity approach , 2002 .