Review on heterogeneous model reconstruction of stone-based composites in numerical simulation

Abstract Numerical simulation has been widely employed in investigating stone-based composite behaviors. Model reconstruction is a prerequisite step to conduct numerical simulations. The objective of this paper is to provide a comprehensive review on the development of heterogeneous model reconstruction of stone-based composites, in particular, Portland cement concrete and asphalt mixtures. The numerical models mainly refer to discrete element models and finite element models. According to the review results, there are two types of heterogeneous models for stone-based materials based on modeling methods, the image based model and computer generated model. The image based model is obtained through image processing on X-ray or optical images by identifying the different phases in the composite. The computer generated model is obtained by placing computer generated aggregate particles into asphalt or cement matrix. Some subcategories for both the image based and computer generated models were detailed as well. The pros and cons of the image based models and computer generated models were also stated and some suggestions were provided. In general, image based models can capture the detailed geometrical information of each phase, but it is costly and time consuming, and the model accuracy is highly dependent on the image processing techniques. Compared to image based model, the computer generated model is more cost effective and much easier to implement, but the main concern is the accuracy of the aggregate model shapes. Future research directions are also provided based on the authors’ views.

[1]  Manoj Khanal,et al.  Application of DEM to evaluate and compare process parameters for a particle failure under different loading conditions , 2010 .

[2]  Ahmet H. Aydilek,et al.  Computational and experimental evaluation of hydraulic conductivity anisotropy in hot-mix asphalt , 2007 .

[3]  John R. Williams,et al.  SUPERQUADRICS AND MODAL DYNAMICS FOR DISCRETE ELEMENTS IN INTERACTIVE DESIGN , 1992 .

[4]  A. T. Papagiannakis,et al.  An improved image processing technique for asphalt concrete X-ray CT images , 2013 .

[5]  Arun Shukla,et al.  Prediction of Damage Behaviors in Asphalt Materials Using a Micromechanical Finite-Element Model and Image Analysis , 2005 .

[6]  Beena Sukumaran,et al.  Evaluating the Influence of Particle Shape On Liquefaction Behavior Using Discrete Element Modeling , 2003 .

[7]  Erol Tutumluer,et al.  Evaluation of Visual Based Aggregate Shape Classifications Using the University of Illinois Aggregate Image Analyzer (UIAIA) , 2006 .

[8]  Yusin Lee,et al.  A packing algorithm for three-dimensional convex particles , 2009 .

[9]  D. J. Barnes,et al.  Computer simulated deformation of compact granular assemblies , 1986 .

[10]  Volkhard Buchholtz,et al.  Molecular Dynamics of Arbitrarily Shaped Granular Particles , 1995 .

[11]  T. Liebling,et al.  Three-dimensional distinct element simulation of spherocylinder crystallization , 2005 .

[12]  Jorge Barbosa Soares,et al.  Aggregate Shape Properties and Their Influence on the Behavior of Hot-Mix Asphalt , 2015 .

[13]  Richard P. Jensen,et al.  Effect of Particle Shape on Interface Behavior of DEM-Simulated Granular Materials , 2001 .

[14]  William G. Buttlar,et al.  Discrete Element Modeling to Predict the Modulus of Asphalt Concrete Mixtures , 2004 .

[15]  Qingli Dai,et al.  Two- and three-dimensional micromechanical viscoelastic finite element modeling of stone-based materials with X-ray computed tomography images , 2011 .

[16]  Marco Foi,et al.  Characterisation of Mortar Morphology in Thin Sections by Digital Image Processing , 2005 .

[17]  William G. Buttlar,et al.  Discrete Element Modeling of Asphalt Concrete: Microfabric Approach , 2001 .

[18]  E Masad,et al.  AIMS: AGGREGATE IMAGING SYSTEM FOR CHARACTERIZING FINE AND COARSE AGGREGATE SHAPE PROPERTIES , 2002 .

[19]  Jonathan D. Bray,et al.  CAPTURING NONSPHERICAL SHAPE OF GRANULAR MEDIA WITH DISK CLUSTERS , 1999 .

[20]  Andreas Schäfer,et al.  Size, shape and orientation of grains in sands and sandstones—image analysis applied to rock thin-sections , 1987 .

[21]  J. Bullard,et al.  Contact function, uniform-thickness shell volume, and convexity measure for 3D star-shaped random particles , 2013 .

[22]  G. A. Kohring,et al.  Computer simulations of sintering via granular dynamics , 1993 .

[23]  Yu Liu,et al.  Simulation of Cyclic Loading Tests for Asphalt Mixtures Using User Defined Models within Discrete Element Method , 2008 .

[24]  Jong Bae Kim,et al.  Multiresolution-based watersheds for efficient image segmentation , 2003, Pattern Recognit. Lett..

[25]  G. A. Kohring,et al.  Computer simulations of critical, non-stationary granular flow through a hopper , 1995 .

[26]  Dallas N. Little,et al.  Three-Dimensional Microstructural Modeling Framework for Dense-Graded Asphalt Concrete Using a Coupled Viscoelastic, Viscoplastic, and Viscodamage Model , 2014 .

[27]  J. S. Lai,et al.  Three-Dimensional Digital Representation of Granular Material Microstructure from X-Ray Tomography Imaging , 2004 .

[28]  Peter J. Bosscher,et al.  DEM simulation of granular media—structure interface: effects of surface roughness and particle shape , 1999 .

[29]  Liang Huang,et al.  Flexural and Thermal Properties of Novel Energy Conservation Slotted Reinforced Concrete Beams , 2016 .

[30]  Qingli Dai,et al.  Prediction of Dynamic Modulus and Phase Angle of Stone-Based Composites Using a Micromechanical Finite-Element Approach , 2010 .

[31]  Eyad Masad,et al.  RELATIONSHIP BETWEEN THE REPRESENTATIVE VOLUME ELEMENT AND MECHANICAL PROPERTIES OF ASPHALT CONCRETE , 2001 .

[32]  Naga Shashidhar,et al.  X-Ray Tomography of Asphalt Concrete , 1999 .

[33]  Antonio Aguado,et al.  Meso-structural study of concrete fracture using interface elements. II: compression, biaxial and Brazilian test , 2008 .

[34]  Li Weisheng,et al.  Anisotropic Filter Based Modified Canny Algorithm , 2007 .

[35]  Dirk S. Reischl,et al.  DEM simulation of concrete fracture and crack evolution , 2012 .

[36]  Jay N. Meegoda,et al.  Micromechanical Model for Temperature Effects of Hot-Mix Asphalt Concrete , 1999 .

[37]  J. Baxter,et al.  Three-dimensional particle shape descriptors for computer simulation of non-spherical particulate assemblies , 2004 .

[38]  Erol Tutumluer,et al.  Evaluation of Aggregate Imaging Techniques for Quantification of Morphological Characteristics , 2013 .

[39]  I. Carol,et al.  Micromechanical analysis of quasi‐brittle materials using fracture‐based interface elements , 2001 .

[40]  Ignacio Carol,et al.  3D meso-structural analysis of concrete specimens under uniaxial tension , 2006 .

[41]  Xiaoxiong Zhong,et al.  Study of Compaction in Hot-Mix Asphalt Using Computer Simulations , 2008 .

[42]  R. Bathurst,et al.  Analytical study of induced anisotropy in idealized granular materials , 1989 .

[43]  Chuangbing Zhou,et al.  3D clustering DEM simulation and non-invasive experimental verification of shear localisation in irregular particle assemblies , 2010 .

[44]  James S Lai,et al.  Three-Dimensional Image Analysis of Aggregate Particles from Orthogonal Projections , 1996 .

[45]  Daniel J. Schneberk,et al.  Three-dimensional nonintrusive imaging of obscured objects by x-ray and gamma-ray computed tomography , 1993, Defense, Security, and Sensing.

[46]  Mostafa A. Elseifi,et al.  Image-Based Modeling of the Dynamic Complex Modulus Test for Asphalt Concrete , 2014 .

[47]  G. Nagy,et al.  Technique to measure 3D work-of-fracture of concrete in compression , 1999 .

[48]  Zhang Weihua,et al.  Microstructural Modeling Method for Asphalt Specimens Supporting 3D Adaptive and Automatic Mesh Generation , 2016 .

[49]  William G. Buttlar,et al.  Application of Discrete Element Modeling Techniques to Predict the Complex Modulus of Asphalt–Aggregate Hollow Cylinders Subjected to Internal Pressure , 2005 .

[50]  Tongyan Pan,et al.  Retracted: Micromechanical Evaluation of the Damping Behavior of Modified Silica Fume Admixed Concrete , 2012 .

[51]  A. T. Papagiannakis,et al.  Micromechanical Analysis of Viscoelastic Properties of Asphalt Concretes , 2002 .

[52]  Peiwen Hao,et al.  Modeling of the Asphalt Concrete to Compare Uniaxial, Hollow Cylindrical, and Indirect Tensile Test , 2014 .

[53]  M. Jinisek.  PARTICLE MODEL FOR FRACTURE AND STATISTICAL MICRO-MACRO CORRELATION OF MATERIAL CONSTANTS , 1995 .

[54]  Zhanping You,et al.  The Effect of Morphological Characteristic of Coarse Aggregates Measured with Fractal Dimension on Asphalt Mixture’s High-Temperature Performance , 2016 .

[55]  Qingli Dai,et al.  Integrated computational–experimental approach for evaluating recovered fracture strength after induction healing of asphalt concrete beam samples , 2016 .

[56]  Erol Tutumluer,et al.  Quantification of Coarse Aggregate Angularity Based on Image Analysis , 2002 .

[57]  Zhanping You,et al.  Aggregate representation for mesostructure of stone based materials using a sphere growth model based on realistic aggregate shapes , 2016 .

[58]  Habtamu Zelelew,et al.  Simulation of Asphalt Concrete Uniaxial Creep Using Discrete Element Method (DEM) , 2010 .

[59]  Andrey P. Jivkov,et al.  Monte Carlo Simulations of Mesoscale Fracture of Concrete with Random Aggregates and Pores: a Size Effect Study , 2015 .

[60]  Robert L. Lytton,et al.  Damage evolution in triaxial compression tests of HMA at high temperatures , 2004 .

[61]  Erol Tutumluer,et al.  Image Analysis Technique for Aggregate Morphology Analysis with Two-Dimensional Fourier Transform Method , 2012 .

[62]  A. A. Mirghasemi,et al.  Particle shape consideration in numerical simulation of assemblies of irregularly shaped particles , 2011 .

[63]  Erol Tutumluer,et al.  Rutting Behavior of NCAT Pavement Test Track Superpave Asphalt Mixes Analyzed For Aggregate Morphology Effects , 2006 .

[64]  R. Bathurst,et al.  Micromechanical Aspects of Isotropic Granular Assemblies With Linear Contact Interactions , 1988 .

[65]  Erol Tutumluer,et al.  Image-aided element shape generation method in discrete-element modeling for railroad ballast , 2014 .

[66]  Qingli Dai,et al.  A micromechanical finite element model for linear and damage‐coupled viscoelastic behaviour of asphalt mixture , 2006 .

[67]  Richard J. Bathurst,et al.  INVESTIGATION OF MICROMECHANICAL FEATURES OF IDEALIZED GRANULAR ASSEMBLIES USING DEM , 1992 .

[68]  William G. Buttlar,et al.  Micromechanical Modeling Approach to Predict Compressive Dynamic Moduli of Asphalt Mixtures Using the Distinct Element Method , 2006 .

[69]  Zhanping You,et al.  Automated real aggregate modelling approach in discrete element method based on X-ray computed tomography images , 2017 .

[70]  Peiwen Hao,et al.  Numerical Simulation of Indirect Tensile Test Based on the Microstructure of Asphalt Mixture , 2011 .

[71]  Feng Chen,et al.  Application of discrete element method to Superpave gyratory compaction , 2012 .

[72]  John D'Angelo,et al.  X-ray Tomography to Characterize Air Void Distribution in Superpave Gyratory Compacted Specimens , 2002 .

[73]  Gianluca Cusatis,et al.  CONFINEMENT-SHEAR LATTICE MODEL FOR CONCRETE DAMAGE IN TENSION AND COMPRESSION: II. COMPUTATION AND VALIDATION , 2003 .

[74]  G. McDowell,et al.  The importance of modelling ballast particle shape in the discrete element method , 2006 .

[75]  Glenn R. McDowell,et al.  A method to model realistic particle shape and inertia in DEM , 2010 .

[76]  G. de Saxcé,et al.  Numerical simulation of granular materials by an improved discrete element method , 2005 .

[77]  Alexander V. Potapov,et al.  A fast model for the simulation of non-round particles , 1998 .

[78]  Carl T. Haas,et al.  3D Image Segmentation of Aggregates from Laser Profiling , 2003 .

[79]  Ivar Horvli,et al.  Discrete element modelling of the resilient behaviour of unbound granular aggregates , 2008 .

[80]  Mehmet T. Tumay,et al.  An Evaluation of the Stress Non-Uniformity due to the Heterogeneity of AC in the Indirect Tensile Test , 2005 .

[81]  T. Ng,et al.  A three-dimensional discrete element model using arrays of ellipsoids , 1997 .

[82]  Edward J. Garboczi,et al.  Anm: a geometrical model for the composite structure of mortar and concrete using real-shape particles , 2016 .

[83]  Jingsong Chen,et al.  Discrete Element Method (DEM) Analyses for Hot-Mix Asphalt (HMA) Mixture Compaction , 2011 .

[84]  G.G.W. Mustoe,et al.  Material Flow Analyses of Noncircular-Shaped Granular Media Using Discrete Element Methods , 2001 .

[85]  Masoud Soltani,et al.  Toward combined local-average stress field modeling of reinforced concrete , 2016 .

[86]  Joe W Button,et al.  Unified Imaging Approach for Measuring Aggregate Angularity and Texture , 2000 .

[87]  Andrey P. Jivkov,et al.  Monte Carlo simulations of mesoscale fracture modelling of concrete with random aggregates and pores , 2015 .

[88]  Duanyi Wang,et al.  A New Method to Characterize the Stone-Stone Contact Degree of Asphalt Mixture Using X-ray Computed Tomography Images , 2011 .

[89]  Dayakar Penumadu,et al.  APPLICATION OF FOURIER ANALYSIS TO DIGITAL IMAGING FOR PARTICLE SHAPE ANALYSIS , 2004 .

[90]  D. Bentz.  Three-Dimensional Computer Simulation of Portland Cement Hydration and Microstructure Development , 1997 .

[91]  E. Huang,et al.  Laboratory investigation of the effect of particle shape characteristics and gradation of aggregates on the skid resistance of asphalt surface mixtures , 1973 .

[92]  P. Cundall,et al.  FORMULATION OF A THREE-DIMENSIONAL DISTINCT ELEMENT MODEL - PART II. MECHANICAL CALCULATIONS FOR MOTION AND INTERACTION OF A SYSTEM COMPOSED OF MANY POLYHEDRAL BLOCKS , 1988 .

[93]  J. Meegoda,et al.  Micromechanical Simulation of Hot Mix Asphalt , 1997 .

[94]  Jorge Barbosa Soares,et al.  Multiscale Modeling to Predict Mechanical Behavior of Asphalt Mixtures , 2010 .

[95]  Eyad Masad,et al.  CHARACTERIZATION OF AIR VOID DISTRIBUTION IN ASPHALT MIXES USING X-RAY COMPUTED TOMOGRAPHY , 2002 .

[96]  Yongli Zhao,et al.  Algorithms for Generating Three-Dimensional Aggregates and Asphalt Mixture Samples by the Discrete-Element Method , 2013 .

[97]  John S Lawler,et al.  Measuring Three-Dimensional Damage in Concrete under Compression , 2001 .

[98]  E. Masad,et al.  Internal structure analysis of asphalt mixes to improve the simulation of Superpave gyratory compaction to field conditions , 2001 .

[99]  Francesco Bencardino,et al.  Numerical and analytical modeling of concrete beams with steel, FRP and hybrid FRP-steel reinforcements , 2016 .

[100]  Dallas N. Little,et al.  Mechanistic Modeling of Permanent Deformation in Asphalt Mixes with the Effect of Aggregate Characteristics (With Discussion) , 2006 .

[101]  Larry N. Lynch,et al.  Morphological Study of Coarse Aggregates Using Image Analysis , 1998 .

[102]  Heinz Burger,et al.  Comparison of sieve and thin-section technique by a Monte-Carlo model , 1976 .

[103]  John G. Hagedorn,et al.  Three-dimensional shape analysis of coarse aggregates : New techniques for and preliminary results on several different coarse aggregates and reference rocks , 2006 .

[104]  Ricardo Tadeu Lopes,et al.  COMPUTED TOMOGRAPHY IN THE FATIGUE TEST ANALYSIS OF AN ASPHALTIC MIXTURE , 1999 .

[105]  Richard P. Jensen,et al.  DEM Simulation of Particle Damage in Granular Media — Structure Interfaces , 2001 .

[106]  Shigeru Fujii,et al.  Local stresses and crack displacements in reinforced concrete elements , 2002 .

[107]  Qingli Dai,et al.  A comparison of micro-mechanical modeling of asphalt materials using finite elements and doublet mechanics , 2005 .

[108]  H. M. Zelelew,et al.  Wavelet-based characterisation of aggregate segregation in asphalt concrete X-ray computed tomography images , 2011 .

[109]  Yong-Rak Kim,et al.  Experimental Testing and Finite Element Modeling to Evaluate Effects of Aggregate Angularity on Bituminous Mixture Performance , 2010 .

[110]  Sanjeev Adhikari,et al.  Dynamic modulus simulation of the asphalt concrete using the X-ray computed tomography images , 2009 .

[111]  Zhanping You,et al.  Visualization and Simulation of Asphalt Concrete with Randomly Generated Three-Dimensional Models , 2009 .

[112]  Yu Liu,et al.  Discrete Element Simulation of Aggregate Sphericity and Orientation: An Approach to Improving the Understanding of Asphalt Concrete , 2010 .

[113]  Soheil Nazarian,et al.  Discrete Element Analysis of the Influences of Aggregate Properties and Internal Structure on Fracture in Asphalt Mixtures , 2010 .

[114]  M. Emin Kutay,et al.  Use of Artificial Neural Networks to Detect Aggregates in Poor-Quality X-Ray CT Images of Asphalt Concrete , 2008 .

[115]  E. Garboczi.  Three-dimensional mathematical analysis of particle shape using X-ray tomography and spherical harmonics: Application to aggregates used in concrete , 2002 .

[116]  A. Munjiza,et al.  The modelling of particle systems with real shapes , 2004, Philosophical Transactions of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[117]  M. Emin Kutay,et al.  3D Micromechanical Simulation of Compaction of Hot Mix Asphalt Using Real Aggregate Shapes Obtained from X-Ray CT , 2010 .

[118]  Reed B. Freeman,et al.  Image Analysis Evaluation of Aggregates for Asphalt Concrete Mixtures , 1998 .

[119]  J. V. van Mier,et al.  Micromechanical Analysis of Fracture of Concrete , 1992 .

[120]  Nicos Martys,et al.  Acquiring, Analyzing, and Using Complete Three-Dimensional Aggregate Shape Information | NIST , 2001 .

[121]  Wenxiang Xu,et al.  Parking simulation of three-dimensional multi-sized star-shaped particles , 2014 .

[122]  Hussain U Bahia,et al.  MODELING AND EXPERIMENTAL MEASUREMENTS OF STRAIN DISTRIBUTION IN ASPHALT MIXES , 2001 .

[123]  Mostafa A. Elseifi,et al.  Heterogeneous Finite-Element Modeling of the Dynamic Complex Modulus Test of Asphalt Mixture Using X-ray Computed Tomography , 2014 .

[124]  Antonio Aguado,et al.  Meso-structural study of concrete fracture using interface elements. I: numerical model and tensile behavior , 2008 .

[125]  P. Cundall,et al.  A discrete numerical model for granular assemblies , 1979 .

[126]  W R Meier,et al.  LABORATORY EVALUATION OF SHAPE AND SURFACE TEXTURE OF FINE AGGREGATE FOR ASPHALT CONCRETE , 1989 .

[127]  Takashi Kyoya,et al.  An isotropic damage model based on fracture mechanics for concrete , 2016 .

[128]  Habtamu Zelelew,et al.  Micromechanical Modeling of Asphalt Concrete Uniaxial Creep Using the Discrete Element Method , 2010 .

[129]  Qingli Dai,et al.  Integrated Experimental-Numerical Approach for Estimating Asphalt Mixture Induction Healing Level through Discrete Element Modeling of a Single-Edge Notched Beam Test , 2015 .

[130]  Richard J. Bathurst,et al.  Micromechanical features of granular assemblies with planar elliptical particles , 1992 .

[131]  Yu Liu,et al.  Three-dimensional discrete element modeling of asphalt concrete: Size effects of elements , 2012 .

[132]  M. K. Chang,et al.  INFLUENCE OF COARSE AGGREGATE SHAPE ON THE STRENGTH OF ASPHALT CONCRETE MIXTURES , 2005 .

[133]  Hans J. Herrmann,et al.  Simulating deformations of granular solids under shear , 1995 .

[134]  Jusuke Hidaka,et al.  Numerical Experiments on Granular Assemblies , 1992 .

[135]  Glenn R. McDowell,et al.  A simple method to create complex particle shapes for DEM , 2008 .

[136]  J. Wang,et al.  Numerical analysis of crack propagation in tension specimens of concrete considered as a 2D multicracked granular composite , 1997 .

[137]  Zhenbao Li,et al.  Bearing Capacities of Different-Diameter Concrete-Filled Steel Tubes under Axial Compression , 2016 .

[138]  M. Tabbara,et al.  RANDOM PARTICLE MODEL FOR FRACTURE OF AGGREGATE OR FIBER COMPOSITES , 1990 .

[139]  Eyad Masad,et al.  Three dimensional simulation of fluid flow in X‐ray CT images of porous media , 2004 .

[140]  Glenn R. McDowell,et al.  Modelling realistic shape and particle inertia in DEM , 2010 .

[141]  Didier Imbault,et al.  Modeling of high-density compaction of granular materials by the Discrete Element Method , 2009 .

[142]  P. Stroeven,et al.  Capabilities for property assessment on different levels of the micro-structure of DEM-simulated cementitious materials , 2015 .

[143]  Jin-Young Park,et al.  Representation of real particles for DEM simulation using X-ray tomography , 2007 .

[144]  Carl T. Haas,et al.  A PROTOTYPE LASER SCANNER FOR CHARACTERIZING SIZE AND SHAPE PARAMETERS IN AGGREGATES , 2001 .

[145]  H. M. Zelelew,et al.  A volumetrics thresholding algorithm for processing asphalt concrete X-ray CT images , 2011 .

[146]  Richard M. Leahy,et al.  Determination of Internal Deformation Field in Asphalt Cores Using X-Ray Computer Tomography , 1996 .

[147]  Gianluca Cusatis,et al.  Confinement-Shear Lattice Model for Concrete Damage in Tension and Compression: I. Theory , 2002 .

[148]  Edward J. Garboczi,et al.  Bridging the Gap between Random Microstructure and 3D Meshing , 2014, J. Comput. Civ. Eng..

[149]  Shihui Shen,et al.  Impact of aggregate packing on dynamic modulus of hot mix asphalt mixtures using three-dimensional discrete element method , 2012 .

[150]  Andrew Drescher,et al.  Numerical experiments on granular assemblies; measurements and observations. , 1982 .

[151]  Eyad Masad,et al.  Internal Structure Characterization of Asphalt Concrete Using Image Analysis , 1999 .

[152]  L. J. Sluys,et al.  Characterization of the packing of aggregate in concrete by a discrete element approach , 2009 .

[153]  Mohammad Hossein Abbaspour-Fard,et al.  Modeling nonspherical particles using multisphere discrete elements , 2001 .

[154]  Dallas N. Little,et al.  Three-Dimensional Microstructural Modeling of Asphalt Concrete by Use of X-Ray Computed Tomography , 2013 .

[155]  Jiansheng Xiang,et al.  Three-dimensional particle shape acquisition and use of shape library for DEM and FEM/DEM simulation , 2008 .

[156]  M. Emin Kutay,et al.  Three-dimensional image processing methods to identify and characterise aggregates in compacted asphalt mixtures , 2010 .

[157]  H. L. Ter Huerne,et al.  Simulation of HMA compaction by using FEM , 2008 .

[158]  John M. Ting,et al.  A ROBUST ALGORITHM FOR ELLIPSE-BASED DISCRETE ELEMENT MODELLING OF GRANULAR MATERIALS , 1992 .

[159]  Takashi Matsushima.  Discrete Element Modeling for Irregularly-shaped Sand Grains , 2002 .

[160]  Lyndon Smith,et al.  A new approach to the three-dimensional quantification of angularity using image analysis of the size and form of coarse aggregates , 2007 .

[161]  Zhendong Qian,et al.  Three-Dimensional Fracture Modeling of Epoxy Asphalt Concrete Using a Heterogeneous Discrete Element Model , 2013 .

[162]  P. Stutzman,et al.  Cement clinker characterization by scanning electron microscopy , 1991 .

[163]  Richard J. Bathurst,et al.  Numerical simulation of idealized granular assemblies with plane elliptical particles , 1991 .

[164]  Qingli Dai,et al.  Investigation of Fracture Behavior of Heterogeneous Infrastructure Materials with Extended-Finite-Element Method and Image Analysis , 2011 .