Residence time distribution in microbial fuel cell and its influence on COD removal with electricity generation

Abstract The liquid flow characteristics in a microbial fuel cell (MFC) were determined using a residence time distribution (RTD) test, and its effects on the performance of the MFC were investigated in terms of electricity generation and chemical oxygen demand (COD) removal. A membrane-less MFC was used with two different anode structures; normal graphite felt disk (“Normal” MFC) and perforated graphite felt disk (“Perforated” MFC). The RTD results showed that there exists nonideal flows such as channeling and tailing in the “Normal” MFC and the flow characteristics were much better in the “Perforated” MFC with the improved electricity generation. COD removal rate was similar between the MFCs. These results show that the flow characterization is an important area of study for the optimization of an MFC.

[1]  Hong Liu,et al.  Electricity generation using an air-cathode single chamber microbial fuel cell in the presence and absence of a proton exchange membrane. , 2004, Environmental science & technology.

[2]  Jae Kyung Jang,et al.  Continuous determination of biochemical oxygen demand using microbial fuel cell type biosensor. , 2004, Biosensors & bioelectronics.

[3]  W. Verstraete,et al.  A microbial fuel cell capable of converting glucose to electricity at high rate and efficiency , 2004, Biotechnology Letters.

[4]  Jae Kyung Jang,et al.  A microbial fuel cell with improved cathode reaction as a low biochemical oxygen demand sensor , 2003, Biotechnology Letters.

[5]  Jae Kyung Jang,et al.  Improvement of cathode reaction of a mediatorless microbial fuel cell , 2004 .

[6]  Jae Kyung Jang,et al.  On-line monitoring of low biochemical oxygen demand through continuous operation of a mediator-less microbial fuel cell , 2005 .

[7]  G. Gil,et al.  Operational parameters affecting the performannce of a mediator-less microbial fuel cell. , 2003, Biosensors & bioelectronics.

[8]  A. Daugulis,et al.  Liquid residence time distributions in immobilized cell bioreactors , 1989, Biotechnology and bioengineering.

[9]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[10]  Jae Kyung Jang,et al.  Improving the dynamic response of a mediator-less microbial fuel cell as a biochemical oxygen demand (BOD) sensor , 2004, Biotechnology Letters.

[11]  H. S. Fogler,et al.  Elements of Chemical Reaction Engineering , 1986 .

[12]  Byung Hong Kim,et al.  Enrichment of microbial community generating electricity using a fuel-cell-type electrochemical cell , 2004, Applied Microbiology and Biotechnology.

[13]  Byung Hong Kim,et al.  Electrochemical activity of an Fe(III)-reducing bacterium, Shewanella putrefaciens IR-1, in the presence of alternative electron acceptors , 1999 .

[14]  D. Lovley,et al.  Electricity generation by direct oxidation of glucose in mediatorless microbial fuel cells , 2003, Nature Biotechnology.

[15]  O. Levenspiel.  Chemical Reaction Engineering , 1972 .

[16]  Byung Hong Kim,et al.  Construction and operation of a novel mediator- and membrane-less microbial fuel cell , 2004 .

[17]  Byung Hong Kim,et al.  A mediator-less microbial fuel cell using a metal reducing bacterium, Shewanella putrefaciens , 2002 .

[18]  Hong Liu,et al.  Production of electricity during wastewater treatment using a single chamber microbial fuel cell. , 2004, Environmental science & technology.

[19]  Residence time distribution in a packed bed bioreactor containing porous glass particles: influence of the presence of immobilized cells. , 1994, Journal of chemical technology and biotechnology.

[20]  Byung Hong Kim,et al.  Direct electrode reaction of Fe(III)-reducing bacterium, Shewanella putrefaciens , 1999 .

[21]  Byung Hong Kim,et al.  Novel BOD (biological oxygen demand) sensor using mediator-less microbial fuel cell , 2003, Biotechnology Letters.

[22]  Hyung Joo Kim,et al.  Practical field application of a novel BOD monitoring system. , 2003, Journal of environmental monitoring : JEM.