论文信息 - DESIGN AND SENSITIVITY ANALYSIS OF AN INPUT SHAPING FILTER IN THE Z -PLANE

DESIGN AND SENSITIVITY ANALYSIS OF AN INPUT SHAPING FILTER IN THE Z -PLANE

Abstract A variety of input shaper has been proposed to reduce the residual vibration of flexible structures. However, the complexity to solve the non-linear simultaneous equations increases due to addition of the constraints to improve the robustness of an input shaper. In this paper, by proposing a graphical approach which places the shaper zeros on the z -plane, the input shaper could conveniently be designed even if the constraints are added for further robustness. Furthermore, it is shown that the proposed method could be accommodated with the variations of both natural frequency and damping ratio. With a mass–damper–spring model, a better performance is obtained using the proposed new multi-hump input shaper.

U.-H. Park | J.-W. Lee | B.-D. Lim | Y.-G. Sung

[1] William Singhose,et al. Vibration Reduction Using Multi-Hump Input Shapers , 1997 .

[2] G. Tallman,et al. Analog study of dead-beat posicast control , 1958 .

[3] Ichiro Watanabe,et al. Digital shaping filters for reducing machine vibration , 1992, IEEE Trans. Robotics Autom..

[4] Warren P. Seering,et al. Time-Optimal Negative Input Shapers , 1997 .

[5] Warren P. Seering,et al. An extension of command shaping methods for controlling residual vibration using frequency sampling , 1992, Proceedings 1992 IEEE International Conference on Robotics and Automation.

[6] Warren P. Seering,et al. Preshaping Command Inputs to Reduce System Vibration , 1990 .

[7] Warren P. Seering,et al. A zero-placement technique for designing shaped inputs to suppress multiple-mode vibration , 1994, Proceedings of 1994 American Control Conference - ACC '94.

[8] Warren P. Seering,et al. Residual Vibration Reduction Using Vector Diagrams to Generate Shaped Inputs , 1994 .

[9] W. Singhose,et al. Input shapers for improving the throughput of torque-limited systems , 1994, 1994 Proceedings of IEEE International Conference on Control and Applications.