Flight Characteristics of Shaping the Membrane Wing of a Micro Air Vehicle

Biologically inspired concepts are rapidly expanding the range of aircraft technology. Consideration is given to merging two biologically-inspired concepts, morphing and micro air vehicles, and the resulting flight characteristics are investigated. Specifically, wing shaping is used to morph the membrane wings of a micro air vehicle. The micro air vehicle has poor lateral control because hinges, and consequently ailerons, are difficult to install on a membrane wing. Instead, a set of torque rods, aligned along the wings, are used to twist the membrane and shape the wing. The resulting morphing is shown to provide significant control authority for lateral dynamics. A set of flight tests are undertaken to determine the flight characteristics by commanding pulses and doublets to the control actuation. The vehicle demonstrates excellent roll performance in response to wing shaping. Futhermore, the vehicle demonstrates several types of spin behavior related to combinations of elevator deflection and the wing shaping.

[1]  Luther N. Jenkins,et al.  Stability and Control Properties of an Aeroelastic Fixed Wing Micro Aerial Vehicle , 2001 .

[2]  John B. Davidson,et al.  AIAA 2002-4875 Simulation and Flight Control of an Aeroelastic Fixed Wing Micro Aerial Vehicle , 2002 .

[3]  Matthew T. Keennon,et al.  Development of the Black Widow Micro Air Vehicle , 2001 .

[4]  Peter Ifju,et al.  Flexible-wing-based Micro Air Vehicles , 2002 .

[5]  Andy J. Keane,et al.  Design of Postbuckled Spinal Structures for Airfoil Camber and Shape Control , 2006 .

[6]  A Fleming Gary,et al.  Projection Moire Interferometry Measurements of Micro Air Vehicle Wings , 2001 .

[7]  G. TEMPLE,et al.  Stability and Control , 1953, Nature.

[8]  Micah J. Solter,et al.  A STUDY OF A PROTOTY PE ACTUATOR CONCEPT FOR MEMBRANE BOUNDARY CONTROL , 2003 .

[9]  Steve Tung,et al.  EAP Actuators for Controlling Space Inflatable Structures , 2003 .

[10]  Rick Lind,et al.  A Time-Varying Hybrid Model for Dynamic Motion Planning of an Unmanned Air Vehicle , 2006 .

[11]  Yongsheng Lian,et al.  Three-Dimensional Fluid-Structure Interactions of a Membrane Wing for Micro Air Vehicle Applications , 2003 .

[12]  Ralph W. Stone,et al.  Summary of Spin and Recovery Characteristics of 12 Models of Flying Wing and Unconventional Type Airplanes , 1951 .

[13]  J. P. Lasalle,et al.  Stability and Control , 1962 .

[14]  Mujahid Abdulrahim,et al.  ROLL CONTROL FOR A MICRO AIR VEHICLE USING ACTIVE WING MORPHING , 2003 .

[15]  Edmund Pendleton,et al.  Active Aeroelastic Wing Flight Research Program: Technical Program and Model Analytical Development , 2000 .

[16]  Peter G. Ifju,et al.  Vision-guided flight stability and control for micro air vehicles , 2002, IEEE/RSJ International Conference on Intelligent Robots and Systems.

[17]  John B. Davidson,et al.  FLIGHT DYNAMIC SIMULATION ASSESSMENT OF A MORPHABLE HYPER-ELLIPTIC CAMBERED SPAN WINGED CONFIGURATION , 2003 .

[18]  John B. Davidson,et al.  SIMULATION AND FLIGHT CONTROL OF AN AEROELASTIC FIXED WING MICRO AERIAL VEHICLE , 2002 .

[19]  Anna-Maria Rivas McGowan,et al.  The Aircraft Morphing Program , 1998 .