Effect of nano-Al2O3 reinforcement on the microstructure and reliability of Sn-3.0Ag-0.5Cu solder joints

Abstract Nanoparticle reinforced lead-free solder has previously been studied by several investigators, but few studies have evaluated its reliability. In this study, resistor chip (RC) micro joints were soldered using nano-Al 2 O 3 particle reinforced Sn–Ag–Cu solder paste. The microstructure and reliability of RC micro joints having different nano-Al 2 O 3 contents (0, 0.25, 0.5 and 1.0 wt%) were investigated in detail. More than 40 solder joints for each condition were made and examined in order to achieve reliable data. The results indicated that nano-Al 2 O 3 particles refined the β-Sn grain size and enlarged the eutectic area of the micro solder joints. Those nanoparticles also reduced the IMC thickness of the Ni-solder and Cu-solder interfaces. Those effects can be attributed to the poor-wetting behavior of nano-Al 2 O 3 particles. The nano-Al 2 O 3 reinforcement mainly enhanced the reliability of the micro solder joints, but did not affect the strength of as-soldered joints obviously. The improvement of reliability was proportional to the nano-Al 2 O 3 content. The microstructure and fracture analysis indicated that the reinforcement and stability of Ni-IMC and Cu-IMC interfaces accounted for better reliability.

[1]  Asit Kumar Gain,et al.  Microstructure, thermal analysis and damping properties of Ag and Ni nano-particles doped Sn–8Zn–3Bi solder on OSP–Cu substrate , 2014 .

[2]  C. Tan,et al.  Interfacial reaction and shear strength of Ni-coated carbon nanotubes reinforced Sn–Ag–Cu solder joints during thermal cycling , 2012 .

[4]  Jianguo Yu,et al.  Effect of TiO2 on Sintering and Grain Growth Kinetics of MgO from MgCl2·6H2O , 2013, Metallurgical and Materials Transactions B.

[5]  C. J. Fang,et al.  Effect of nano-TiO2 addition on the microstructure and bonding strengths of Sn3.5Ag0.5Cu composite solder BGA packages with immersion Sn surface finish , 2011 .

[6]  S. Nai,et al.  Enhancing the properties of a lead-free solder with the addition of Ni-coated carbon nanotubes , 2009, 2009 International Conference on Electronic Packaging Technology & High Density Packaging.

[7]  Y. C. Chan,et al.  Interfacial microstructure and shear strength of Ag nano particle doped Sn-9Zn solder in ball grid array packages , 2009, Microelectron. Reliab..

[8]  Z. Xia,et al.  Effects of nano-structured particles on microstructure and microhardness of Sn–Ag solder alloy , 2010 .

[9]  John H. Lau,et al.  Effects of voids on bump chip carrier (BCC++) solder joint reliability , 2002, 52nd Electronic Components and Technology Conference 2002. (Cat. No.02CH37345).

[10]  L. Arnberg,et al.  Segregation of particles and its influence on the morphology of the eutectic silicon phase in Al–7 wt.% Si alloys , 2006 .

[11]  Y. C. Chan,et al.  Effect of additions of ZrO2 nano-particles on the microstructure and shear strength of Sn-Ag-Cu solder on Au/Ni metallized Cu pads , 2011, Microelectron. Reliab..

[12]  Y. C. Chan,et al.  The influence of addition of Al nano-particles on the microstructure and shear strength of eutectic Sn-Ag-Cu solder on Au/Ni metallized Cu pads , 2010 .

[13]  Y. C. Chan,et al.  Influence of Ag micro-particle additions on the microstructure, hardness and tensile properties of Sn-9Zn binary eutectic solder alloy , 2010, Microelectron. Reliab..

[14]  Anthony Primavera,et al.  Effect of voids on the reliability of BGA/CSP solder joints , 2003, Microelectron. Reliab..

[15]  C. Tan,et al.  NANOMECHANICAL PROPERTIES OF A Sn–Ag–Cu SOLDER REINFORCED WITH Ni-COATED CARBON NANOTUBES , 2010 .

[16]  M. M. Arafat,et al.  Stability of molybdenum nanoparticles in Sn-3.8Ag-0.7Cu solder during multiple reflow and their influence on interfacial intermetallic compounds , 2012 .

[17]  Li-li Gao,et al.  Interfacial compounds growth of SnAgCu(nano La2O3)/Cu solder joints based on experiments and FEM , 2015 .

[18]  S. Y. Chang,et al.  Effects of nano-Al2O3 additions on microstructure development and hardness of Sn3.5Ag0.5Cu solder , 2010 .

[19]  A. M. Abdraboh,et al.  Tensile deformation behavior and melting property of nano-sized ZnO particles reinforced Sn–3.0Ag–0.5Cu lead-free solder , 2014 .

[20]  Y. Chan,et al.  Influence of small Sb nanoparticles additions on the microstructure, hardness and tensile properties of Sn–9Zn binary eutectic solder alloy , 2010, Journal of Materials Science: Materials in Electronics.

[21]  Rong-Sheng Chen,et al.  Effect of 0.5 wt% nano-TiO2 addition into low-Ag Sn0.3Ag0.7Cu solder on the intermetallic growth with Cu substrate during isothermal aging , 2015, Journal of Materials Science: Materials in Electronics.

[22]  Samjid H. Mannan,et al.  A review: On the development of low melting temperature Pb-free solders , 2014, Microelectron. Reliab..

[23]  L. Ladani,et al.  IMC growth of Sn-3.5Ag/Cu system: Combined chemical reaction and diffusion mechanisms , 2012 .

[24]  Y. Liu,et al.  Effect of TiO2 addition concentration on the wettability and intermetallic compounds growth of Sn3.0Ag0.5Cu–xTiO2 nano-composite solders , 2014, Journal of Materials Science: Materials in Electronics.

[25]  King-Ning Tu,et al.  Structure and properties of lead-free solders bearing micro and nano particles , 2014 .

[26]  Seung-Boo Jung,et al.  IMC morphology, interfacial reaction and joint reliability of Pb-free Sn–Ag–Cu solder on electrolytic Ni BGA substrate , 2005 .

[27]  A. A. El-Daly,et al.  Novel SiC nanoparticles-containing Sn–1.0Ag–0.5Cu solder with good drop impact performance , 2013 .

[28]  Jidong Yang,et al.  Effect of process-induced voids on isothermal fatigue resistance of CSP lead-free solder joints , 2008, Microelectron. Reliab..