Observation of ultrasonic guided wave propagation behaviours in pre‐stressed multi‐wire structures

HIGHLIGHTSTensile force measurement based on missing frequency band of ultrasonic guided wave in strands.Missing frequency bands of ultrasonic guided waves in tensioned steel wire ropes.Effects of tensile load on the ultrasonic guided wave energy attenuation in steel wire ropes.Ultrasonic guided wave energy jump behaviour in tensioned steel wire ropes. ABSTRACT Ultrasonic guided wave (UGW) is a promising technique for nondestructive testing of pre‐stressed multi‐wire structures, such as steel strand and wire rope. The understanding of the propagation behaviours of UGW in these structures is a priority to applications. In the present study, first the properties of the UGW missing frequency band in the pre‐stressed seven‐wire steel strand is experimentally examined. The high correlation between the observed results and the previously published findings proves the feasibility of the magnetostrictive sensor (MsS) based testing method. The evolution of missing frequency band of UGW in slightly tensioned steel strand is discussed. Two calibration equations representing the relationship between the missing band parameters and the tensile force are given to derive a new tensile force measurement method, which is capable of measuring an incremental of stress of approximately 3 MPa. Second, the effects of tensile force on the UGW propagation behaviours in three types of complicated steel wire ropes are alternatively investigated based on the short time Fourier transform (STFT) results of the received direct transmission wave (DTW) signals. The observed inherent missing frequency band of the longitudinal mode UGW in the pre‐stressed steel wire rope and its shifting to a higher frequency range as the increases of the applied tensile force are reported for the first time. The influence of applied tensile force on the amplitude of the DTW signal and the unique UGW energy jump behaviour observed in a wire rope of 16.0 mm, 6 × Fi(29) + IWRC are also investigated, despite the fact that they cannot yet be explained.

[1]  J. Hanley,et al.  Effects of tensile loading on the properties of elastic-wave propagation in a strand , 1998 .

[2]  Peter W. Tse,et al.  An innovative design for using flexible printed coils for magnetostrictive-based longitudinal guided wave sensors in steel strand inspection , 2011 .

[3]  Guided waves in a helical peripheral strand of a wirerope by electromagnetic acoustic transducers , 2012, 2012 IEEE International Ultrasonics Symposium.

[4]  Salvatore Salamone,et al.  Prediction of stress waves propagation in progressively loaded seven wire strands , 2012, Smart Structures.

[5]  Fabien Treyssède,et al.  Investigation of elastic modes propagating in multi-wire helical waveguides , 2010 .

[6]  Arturo Baltazar,et al.  Study of wave propagation in a multiwire cable to determine structural damage , 2010 .

[7]  Zenghua Liu,et al.  Configuration optimization of magnetostrictive transducers for longitudinal guided wave inspection in seven-wire steel strands , 2010 .

[8]  Glenn Washer,et al.  Velocity Constants for Ultrasonic Stress Measurement in Prestressing Tendons , 2002 .

[9]  Tat-Hean Gan,et al.  Increased range of ultrasonic guided wave testing of overhead transmission line cables using dispersion compensation. , 2015, Ultrasonics.

[10]  S. Chaki,et al.  Guided ultrasonic waves for non-destructive monitoring of the stress levels in prestressed steel strands. , 2009, Ultrasonics.

[11]  Fabien Treyssède,et al.  Numerical investigation of elastic modes of propagation in helical waveguides. , 2007, The Journal of the Acoustical Society of America.

[12]  Glenn Washer,et al.  Ultrasonic stress measurements in prestressing tendons , 2002 .

[13]  Christoph Schaal,et al.  Structural health monitoring of cylindrical structures using guided ultrasonic waves , 2012 .

[14]  Allen H. Meitzler,et al.  Mode Coupling Occurring in the Propagation of Elastic Pulses in Wires , 1961 .

[15]  Patrice Cartraud,et al.  Mechanical modeling of helical structures accounting for translational invariance. Part 2 : Guided wave propagation under axial loads , 2013 .

[16]  S. Kulkarni,et al.  Nondestructive Testing of Overhead Transmission LINES—NUMERICAL and Experimental Investigation , 2009 .

[17]  Frieder Seible,et al.  STRESS MEASUREMENT AND DEFECT DETECTION IN STEEL STRANDS BY GUIDED STRESS WAVES , 2003 .

[18]  Salvatore Salamone,et al.  Reference-free corrosion damage diagnosis in steel strands using guided ultrasonic waves. , 2015, Ultrasonics.

[19]  Yong Wang,et al.  A novel TMR-based MFL sensor for steel wire rope inspection using the orthogonal test method , 2015 .

[20]  B Kvasnica,et al.  Highly precise non-contact instrumentation for magnetic measurement of mechanical stress in low-carbon steel wires , 1996 .

[21]  Piervincenzo Rizzo,et al.  Ultrasonic Wave Propagation in Progressively Loaded Multi-Wire Strands , 2006 .