Mechanical behaviour of a creased thin strip

Abstract. In this study the mechanical behaviour of a creased thin strip under opposite-sense bending was investigated. It was found that a simple crease, which led to the increase of the second moment of area, could significantly alter the overall mechanical behaviour of a thin strip, for example the peak moment could be increased by 100 times. The crease was treated as a cylindrical segment of a small radius. Parametric studies demonstrated that the geometry of the strip could strongly influence its flexural behaviour. We showed that the uniform thickness and the radius of the creased segment had the greatest and the least influence on the mechanical behaviour, respectively. We further revealed that material properties could dramatically affect the overall mechanical behaviour of the creased strip by gradually changing the material from being linear elastic to elastic-perfect plastic. After the formation of the fold, the moment of the two ends of the strip differed considerably when the elasto-plastic materials were used, especially for materials with smaller tangent modulus in the plastic range. The deformation patterns of the thin strips from the finite element simulations were verified by physical models made of thin metal strips. The findings from this study provide useful information for designing origami structures for engineering applications using creased thin strips.

[1]  R. Full,et al.  Cockroaches traverse crevices, crawl rapidly in confined spaces, and inspire a soft, legged robot , 2016, Proceedings of the National Academy of Sciences.

[2]  Yi Min Xie,et al.  Design of dimpled tubular structures for energy absorption , 2017 .

[3]  Yan Wang,et al.  Experiment and multiobjective optimization design of tape-spring hinges , 2015 .

[4]  Robert J. Lang,et al.  Origami 5: Fifth International Meeting of Origami Science, Mathematics, and Education , 2011 .

[5]  J. Sambrook,et al.  Protein folding in the cell , 1992, Nature.

[6]  Rui Peng,et al.  Origami of thick panels , 2015, Science.

[7]  Thomas C. Hull,et al.  Programming Reversibly Self‐Folding Origami with Micropatterned Photo‐Crosslinkable Polymer Trilayers , 2015, Advanced materials.

[8]  Levi H. Dudte,et al.  Geometric mechanics of curved crease origami. , 2012, Physical review letters.

[9]  Guglielmo S. Aglietti,et al.  Experimental Investigation of Tape Springs Folded in Three Dimensions , 2006 .

[10]  Keith A. Seffen,et al.  Deployment dynamics of tape springs , 1999, Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences.

[11]  Keith A. Seffen,et al.  Folding and deployment of curved tape springs , 2000 .

[12]  Simon D. Guest,et al.  Origami folding: A Structural Engineering Approach , 2011 .

[13]  Larry L. Howell,et al.  Waterbomb base: a symmetric single-vertex bistable origami mechanism , 2014 .

[14]  Jinkyu Yang,et al.  Reentrant Origami-Based Metamaterials with Negative Poisson's Ratio and Bistability. , 2015, Physical review letters.

[15]  B. Thiria,et al.  Mechanical response of a creased sheet. , 2014, Physical review letters.

[16]  Jacques Dumais,et al.  Folding of an opened spherical shell , 2013 .

[17]  James C. Weaver,et al.  Rational design of reconfigurable prismatic architected materials , 2017, Nature.

[18]  Yi Min Xie,et al.  A Kirigami Approach to Forming a Synthetic Buckliball , 2016, Scientific Reports.

[19]  Tomohiro Tachi,et al.  Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials , 2015, Proceedings of the National Academy of Sciences.

[20]  Omer Soykasap,et al.  Analysis of tape spring hinges , 2007 .

[21]  Spencer P. Magleby,et al.  Origami-like creases in sheet materials for compliant mechanism design , 2013 .

[22]  Basile Audoly,et al.  A non‐linear rod model for folded elastic strips , 2013, 1306.5035.

[23]  Ramana V. Grandhi,et al.  Optimal design of a three tape-spring hinge deployable space structure using an experimentally validated physics-based model , 2017 .

[24]  Larry L. Howell,et al.  Evaluating Compliant Hinge Geometries for Origami-Inspired Mechanisms , 2014 .

[25]  Yi Min Xie,et al.  Energy absorption of thin-walled tubes with pre-folded origami patterns: Numerical simulation and experimental verification , 2016 .