Maximizing the displacement of compact planar dielectric elastomer actuators

We present a model and its experimental validation for the optimization of the in-plane displacement of a rigid platform mounted on a compact dielectric elastomer actuator. Unlike the situation in which the mechanical prestretch of the membrane is maintained by a dead load (which leads to the highest strain, but is unsuitable for most practical applications), we study here the case in which the dielectric membrane is stretched on a frame, with the passive zones of the membrane acting as non-linear springs, thus avoiding external weights or springs, hence allowing for a compact and simple device. We demonstrate how to maximize the displacement of the platform relative to the overall size of the device by optimum choice of membrane prestretch and electrode geometry. In particular, we show that using a passive membrane decreases the maximum displacement of the platform by a factor of 2 compared to constant-force case. However, this loss can be compensated by using bidirectional actuation, with electrodes on both sides of the platform (one side at a time serving as the passive membrane). The differences between the idealised situation of the model and manufacturable devices are discussed and validated by finite element model simulations and experimental measurements.

[1]  Z. Suo,et al.  Dielectric elastomer actuators under equal-biaxial forces, uniaxial forces, and uniaxial constraint of stiff fibers , 2012 .

[2]  Guggi Kofod,et al.  Voltage-controlled compression for period tuning of optical surface relief gratings. , 2011, Optics letters.

[3]  Gabor Kovacs,et al.  Contractive tension force stack actuator based on soft dielectric EAP , 2009, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[4]  Q. Pei,et al.  High-speed electrically actuated elastomers with strain greater than 100% , 2000, Science.

[5]  Herbert Shea,et al.  An array of 100 μm × 100 μm dielectric elastomer actuators with 80% strain for tissue engineering applications , 2012 .

[6]  Samuel Rosset,et al.  Ion-implanted compliant and patternable electrodes for miniaturized dielectric elastomer actuators , 2008, SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[7]  M. Blum,et al.  Optotune focus tunable lenses and laser speckle reduction based on electroactive polymers , 2012, Photonics West - Micro and Nano Fabricated Electromechanical and Optical Components.

[8]  C. Keplinger,et al.  Harnessing snap-through instability in soft dielectrics to achieve giant voltage-triggered deformation , 2012 .

[9]  S. Bauer,et al.  Energy minimization for self-organized structure formation and actuation , 2007 .

[10]  I. Gavrilovich,et al.  Rollable Multisegment Dielectric Elastomer Minimum Energy Structures for a Deployable Microsatellite Gripper , 2015, IEEE/ASME Transactions on Mechatronics.

[11]  Samuel Rosset,et al.  Maximizing strain in miniaturized dielectric elastomer actuators , 2015, Smart Structures.

[12]  Choon Chiang Foo,et al.  Giant, voltage-actuated deformation of a dielectric elastomer under dead load , 2012 .

[13]  L. Mullins.  Softening of Rubber by Deformation , 1969 .

[14]  S. James Biggs,et al.  Artificial muscle actuators for haptic displays: system design to match the dynamics and tactile sensitivity of the human fingerpad , 2010, Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring.

[15]  A. Gent.  A New Constitutive Relation for Rubber , 1996 .

[16]  Zhigang Suo,et al.  Dielectric Elastomer Generators: How Much Energy Can Be Converted? , 2011, IEEE/ASME Transactions on Mechatronics.

[17]  D. De Rossi,et al.  Folded dielectric elastomer actuators , 2007 .

[18]  J. Perruisseau-Carrier,et al.  A tunable millimeter-wave phase shifter driven by dielectric elastomer actuators , 2014, Smart Structures.

[19]  Samuel Rosset,et al.  An instrument to obtain the correct biaxial hyperelastic parameters of silicones for accurate DEA modelling , 2014, Smart Structures.