Wi-fi backscatter

RF-powered computers are small devices that compute and communicate using only the power that they harvest from RF signals. While existing technologies have harvested power from ambient RF sources (e.g., TV broadcasts), they require a dedicated gateway (like an RFID reader) for Internet connectivity. We present Wi-Fi Backscatter, a novel communication system that bridges RF-powered devices with the Internet. Specifically, we show that it is possible to reuse existing Wi-Fi infrastructure to provide Internet connectivity to RF-powered devices. To show Wi-Fi Backscatter’s feasibility, we build a hardware prototype and demonstrate the first communication link between an RF-powered device and commodity Wi-Fi devices. We use off-the-shelf Wi-Fi devices including Intel Wi-Fi cards, Linksys Routers, and our organization’s Wi-Fi infrastructure, and achieve communication rates of up to 1 kbps and ranges of up to 2.1 meters. We believe that this new capability can pave the way for the rapid deployment and adoption of RF-powered devices and achieve ubiquitous connectivity via nearby mobile devices that are Wi-Fi enabled. CATEGORIES AND SUBJECT DESCRIPTORS C.2.1 [Network Architecture and Design]: Wireless communication

[1]  References , 1971 .

[2]  Hideki Ochiai,et al.  On the distribution of the peak-to-average power ratio in OFDM signals , 2001, IEEE Trans. Commun..

[3]  R. Zane,et al.  Recycling ambient microwave energy with broad-band rectenna arrays , 2004, IEEE Transactions on Microwave Theory and Techniques.

[4]  Byung-Seo Kim,et al.  Downlink and uplink resource allocation in IEEE 802.11 wireless LANs , 2005, IEEE Transactions on Vehicular Technology.

[5]  J.A.C. Theeuwes,et al.  Ambient RF Energy Scavenging: GSM and WLAN Power Density Measurements , 2008, 2008 38th European Microwave Conference.

[6]  David Wetherall,et al.  RFID sensor networks with the Intel WISP , 2008, SenSys '08.

[7]  Joshua R. Smith,et al.  Experimental results with two wireless power transfer systems , 2009, 2009 IEEE Radio and Wireless Symposium.

[8]  Ratul Mahajan,et al.  Wi-Fi Networks are Underutilized , 2009 .

[9]  J. Volakis,et al.  Wireless power harvesting with planar rectennas for 2.45 GHz RFIDs , 2010, 2010 URSI International Symposium on Electromagnetic Theory.

[10]  Dina Katabi,et al.  Secure In-Band Wireless Pairing , 2011, USENIX Security Symposium.

[11]  Hiroyuki Arai,et al.  DTV band micropower RF energy-harvesting circuit architecture and performance analysis , 2011, 2011 IEEE International Conference on RFID-Technologies and Applications.

[12]  David Wetherall,et al.  Tool release: gathering 802.11n traces with channel state information , 2011, CCRV.

[13]  A. Costanzo,et al.  Design and realization of a wearable multi-frequency RF energy harvesting system , 2011, Proceedings of the 5th European Conference on Antennas and Propagation (EUCAP).

[14]  Tadahiro Kuroda,et al.  A battery-less WiFi-BER modulated data transmitter with ambient radio-wave energy harvesting , 2011, 2011 Symposium on VLSI Circuits - Digest of Technical Papers.

[15]  Hoseon Lee,et al.  SenSprout: inkjet-printed soil moisture and leaf wetness sensor , 2012, UbiComp.

[16]  M. S. Reynolds,et al.  Feasibility of wireless sensors using ambient 2.4GHz RF energy , 2012, 2012 IEEE Sensors.

[17]  Piotr Indyk,et al.  Efficient and reliable low-power backscatter networks , 2012, CCRV.

[18]  Chi-Chih Chen,et al.  Design of an efficient ambient WiFi energy harvesting system , 2012 .

[19]  Ambient RF Energy Harvesting Sensor Device With Capacitor-Leakage-Aware Duty Cycle Control , 2013, IEEE Sensors Journal.

[20]  Yi Zhao,et al.  A wireless sensing platform utilizing ambient RF energy , 2013, 2013 IEEE 13th Topical Meeting on Silicon Monolithic Integrated Circuits in RF Systems.

[21]  David Wetherall,et al.  Ambient backscatter: wireless communication out of thin air , 2013, SIGCOMM.

[22]  Deepak Ganesan,et al.  Enabling Bit-by-Bit Backscatter Communication in Severe Energy Harvesting Environments , 2014, NSDI.

[23]  Felix Wortmann,et al.  Internet of Things , 2015, Business & Information Systems Engineering.