Identification of Machine Parameters of a

This paper presents a method for estimating the machine parameters of a synchronous motor. The presented method is equally applicable for a wound field synchronous motor, synchronous reluctance motor, or permanent magnet (PM) syn- chronous motor, both the interior and surface-mount types. The method works particularly well for machines having a significant amount of space harmonics, such as synchronous reluctance and interior PM (IPM) machines, where the harmonics are predom- inantly the slot harmonics. It is also well suited for surface PM machines operating under saturation, where the harmonics are saturation-induced. The presence of these harmonics makes the parameter identification difficult. Most of the methods presented so far in the literature have failed to properly identify machine parameters in the presence of space harmonics. In this paper, the machine parameters, identified by using a proposed algorithm, are compared with the finite element and the experimental results to demonstrate the effectiveness of the presented method. Both interior PM and surface PM machines are considered.

[1]  R. C. Beck,et al.  Time-domain identification of synchronous machine parameters from simple standstill tests , 1990 .

[2]  G. Franceschini,et al.  Cross-saturation in synchronous reluctance motors of the transverse-laminated type , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[3]  W. J. Wilson,et al.  Synchronous machine parameter identification: a time domain approach , 1988 .

[4]  M. Trlep,et al.  Evaluation of saturation and cross-magnetization effects in interior permanent magnet synchronous motor , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[5]  Seung-Ki Sul,et al.  Inverter output voltage synthesis using novel dead time compensation , 1996 .

[6]  A. Tumageanian,et al.  Synchronous machine parameter estimation from standstill flux decay data , 1992, [1992] Proceedings of the 35th Midwest Symposium on Circuits and Systems.

[7]  Ali Keyhani,et al.  Estimation of permanent magnet motor parameters , 1997, IAS '97. Conference Record of the 1997 IEEE Industry Applications Conference Thirty-Second IAS Annual Meeting.

[8]  N. Bianchi,et al.  Magnetic models of saturated interior permanent magnet motors based on finite element analysis , 1998, Conference Record of 1998 IEEE Industry Applications Conference. Thirty-Third IAS Annual Meeting (Cat. No.98CH36242).

[9]  Philippe Viarouge,et al.  Identification of generalised models of synchronous machines from time-domain tests , 1991 .

[10]  A. Kilthau,et al.  Appropriate models for the control of the synchronous reluctance machine , 2002, Conference Record of the 2002 IEEE Industry Applications Conference. 37th IAS Annual Meeting (Cat. No.02CH37344).

[11]  J. Balda,et al.  Measurement of Synchronous Machine Parameters by a Modified Frequency Response Method - Part II: Measured Results , 1987, IEEE Transactions on Energy Conversion.