Characterization of the cyclic-plastic behaviour of flexible structures by applying the Chaboche model

During seismic events, the gravity loads may cause a reduction of the lateral stiffness of structures; inelastic deformations combined with horizontal loads (P-Δ effect) can bring to a state of dynamic instability that obviously influences building safety. Especially for flexible structures, the P-Δ effect amplifies structural deformations and resultants stresses, and thus may represent a source of sideway collapse. Since this type of collapse is the result of progressive accumulation of plastic deformation on structural components, the specific objective of this works is to study this effect on a three floor metallic frame (made of aluminium alloy). A non-linear finite element (FE) model of the frame has been developed to study the dynamic non-linear behaviour of the structure, and compare it with the experimental results obtained from a scaled model of the real structure. The FE model, where a simple isotropic hardening behaviour was assumed for the material, was not able to reproduce the real behaviour of the structure. Rather, the correct description of the cyclic plastic behaviour of the material was essential for the numerical analysis of the structure. The characterization of the non-linear behaviour of the material was made by cyclic tension–compression tests on material specimen, from which the coefficients of Chaboche's model were properly calibrated. In this way, the finite element model of the structure provided results in optimum agreement with the experimental ones, and was able to predict the lateral collapse very well.

[1]  Dimitris L. Karabalis,et al.  Inclusion of P–Δ effect in displacement‐based seismic design of steel moment resisting frames , 2007 .

[2]  Paolo Negro,et al.  A damage index of generalised applicability , 2005 .

[3]  Luis Eduardo Mujica,et al.  Damage classification in structural health monitoring using principal component analysis and self‐organizing maps , 2013 .

[4]  C. O. Frederick,et al.  A mathematical representation of the multiaxial Bauschinger effect , 2007 .

[5]  Wang Zhen-lin,et al.  A new approach to low-cycle fatigue damage based on exhaustion of static toughness and dissipation of cyclic plastic strain energy during fatigue , 2001 .

[6]  Daniel Kujawski,et al.  Effect of mean stress and ratcheting strain on fatigue life of steel , 1996 .

[7]  Masaomi Teshigawara,et al.  Detection and estimation of damage to steel frames through shaking table tests , 2005 .

[8]  Avigdor Rutenberg Simplified P-Delta Analyses for Asymmetric Structures , 1982 .

[9]  Yoshikazu Araki,et al.  Criteria for assessing dynamic collapse of elastoplastic structural systems , 2000 .

[10]  Giovanni B. Broggiato,et al.  Comparison Between Two Experimental Procedures for Cyclic Plastic Characterization of High Strength Steel Sheets , 2012 .

[11]  Nathan M. Newmark,et al.  A Method of Computation for Structural Dynamics , 1959 .

[12]  E. L. Wilson,et al.  Static and Dynamic Analysis of Multi-Story Buildings, Including P-Delta Effects , 1987 .

[13]  David J. Ewins,et al.  Modal Testing: Theory, Practice, And Application , 2000 .

[14]  Dionisio Bernal,et al.  Instability of buildings during seismic response , 1998 .

[15]  Cristian Teodosiu,et al.  Work-hardening behavior of mild steel under stress reversal at large strains , 1992 .

[16]  Christof Devriendt,et al.  Identification of modal parameters from transmissibility measurements , 2008 .

[17]  S. Akkar,et al.  Dynamic Instability of Simple Structural Systems , 2003 .

[18]  W. Prager,et al.  A NEW METHOD OF ANALYZING STRESSES AND STRAINS IN WORK - HARDENING PLASTIC SOLIDS , 1956 .

[19]  Anil K. Chopra,et al.  Dynamics of Structures: Theory and Applications to Earthquake Engineering , 1995 .

[20]  J. Chaboche Constitutive equations for cyclic plasticity and cyclic viscoplasticity , 1989 .

[21]  Daniela Isidori,et al.  Proof of concept of the structural health monitoring of framed structures by a novel combined experimental and theoretical approach , 2016 .

[22]  Hans-Werner Ziegler A Modification of Prager's Hardening Rule , 1959 .

[23]  J. Chaboche Time-independent constitutive theories for cyclic plasticity , 1986 .

[24]  Christoph Adam,et al.  Seismic collapse capacity of basic inelastic structures vulnerable to the P‐delta effect , 2012 .

[25]  K. J. Weinmann,et al.  The Bauschinger Effect of Sheet Metal Under Cyclic Reverse Pure Bending , 1988 .

[26]  Poul Henning Kirkegaard,et al.  Special issue on Operational Modal Analysis , 2010 .

[27]  Fusahito Yoshida,et al.  A model of large-strain cyclic plasticity describing the Bauschinger effect and workhardening stagnation , 2002 .

[28]  B. Schwarz,et al.  Measurements Required for Displaying Operating Deflection Shapes , 2004 .

[29]  Edward L. Wilson,et al.  Three dimensional static and dynamic analysis of structures : A physical approach with emphasis on earthquake engineering , 2000 .