Conducted at the National Institute for Occupational Safety and Health's (NIOSH) Office of Mine Safety and Health Research, the experiment described in this paper is part of ongoing mine illumination research designed to explore the benefits of solid-state lighting technologies when applied to the underground mining industry. This experiment involves the comparative evaluation of cap lamps with similar spectral power distributions, focusing on the electrical and battery discharge characteristics, with a secondary objective being the benefits gained through alternative light beam distributions. NIOSH researchers conducted the investigation by comparing three commercially available light-emitting diode cap lamps and an NIOSH prototype cap lamp at varying power settings. Visual performance for the detection of hazards was quantified by recording times of detection for finding rotating targets in the peripheral field of view and objects representing trip and fall hazards on the ground. The NIOSH prototype cap lamp resulted in improvements ranging from 15% to 43% for peripheral motion detection time and 5%-23% for slip, trip, and fall object detection time, respectively, as compared with the referent incandescent cap lamp.
[1]
Sean Gallagher,et al.
Visual performance for trip hazard detection when using incandescent and led miner cap lamps.
,
2010,
Journal of safety research.
[2]
Sean Gallagher,et al.
Evaluation of Visual Performance When Using Incandescent, Fluorescent, and LED Machine Lights in Mesopic Conditions
,
2009,
2009 IEEE Industry Applications Society Annual Meeting.
[3]
John R. Bartels,et al.
Evaluation of Peripheral Visual Performance When Using Incandescent and LED Miner Cap Lamps
,
2008,
2008 IEEE Industry Applications Society Annual Meeting.
[4]
J. J. Sammarco,et al.
Evaluation of glare for incandescent and LED miner cap lamps in mesopic conditions
,
2009
.