Enhanced fracture toughness of hierarchical carbon nanotube reinforced carbon fibre epoxy composites with engineered matrix microstructure

[1]  A. Bismarck,et al.  Applying a potential difference to minimise damage to carbon fibres during carbon nanotube grafting by chemical vapour deposition , 2017, Nanotechnology.

[2]  A. Bismarck,et al.  Thermosetting nanocomposites with high carbon nanotube loadings processed by a scalable powder based method , 2016 .

[3]  A. Bismarck,et al.  Thermosetting hierarchical composites with high carbon nanotube loadings: En route to high performance , 2016 .

[4]  Wendel Wohlleben,et al.  Release characteristics of selected carbon nanotube polymer composites , 2014 .

[5]  A. Bismarck,et al.  Wet impregnation as route to unidirectional carbon fibre reinforced thermoplastic composites manufacturing , 2011 .

[6]  Zhiwei Xu,et al.  Multi-scale hybrid composites-based carbon nanotubes , 2011 .

[7]  N. A. Siddiqui,et al.  DISPERSION AND FUNCTIONALIZATION OF CARBON NANOTUBES FOR POLYMER-BASED NANOCOMPOSITES: A REVIEW , 2010 .

[8]  A. Bismarck,et al.  Carbon nanotube-based hierarchical composites: a review , 2010 .

[9]  Ignace Verpoest,et al.  Influence of carbon nanotube reinforcement on the processing and the mechanical behaviour of carbon fiber/epoxy composites , 2009 .

[10]  Karl Schulte,et al.  On nanocomposite toughness , 2008 .

[11]  L. Ye,et al.  High impact strength epoxy nanocomposites with natural nanotubes , 2007 .

[12]  Klaus Friedrich,et al.  Epoxy nanocomposites ¿ fracture and toughening mechanisms , 2006 .

[13]  E. Greenhalgh,et al.  Evaluation of toughening concepts at structural features in CFRP—Part I: Stiffener pull-off , 2006 .

[14]  Tsu-Wei Chou,et al.  Nanocomposites in context , 2005 .

[15]  Peter J. F. Harris,et al.  Carbon nanotube composites , 2004 .

[16]  T. Chou,et al.  Advances in the science and technology of carbon nanotubes and their composites: a review , 2001 .

[17]  R. Ruoff,et al.  Strength and breaking mechanism of multiwalled carbon nanotubes under tensile load , 2000, Science.

[18]  Al Highsmith,et al.  Quantitative Assessment of Fiber Fracture in Damaged Laminates Using X-Ray Radiography , 1997 .

[19]  Y. Mai,et al.  High strength, high fracture toughness fibre composites with interface control—A review , 1991 .

[20]  Y. Mai,et al.  Failure mechanisms in toughened epoxy resins—A review , 1988 .

[21]  Y. Mai.  Controlled interfacial bonding on the strength and fracture toughness of Kevlar and carbon fibre composites , 1983 .

[22]  J. Favre.  Improving the fracture energy of carbon fibre-reinforced plastics by delamination promoters , 1977 .

[23]  A. Atkins.  Intermittent bonding for high toughness/ high strength composites , 1975 .

[24]  G. Irwin.  ANALYSIS OF STRESS AND STRAINS NEAR THE END OF A CRACK TRAVERSING A PLATE , 1957 .