Implementation of adaptive inverse controller for an interior permanent magnet synchronous motor adjustable speed drive system based on predictive current control

This study investigates the implementation of predictive current control for an interior permanent magnet synchronous motor (IPMSM) drive system. By measuring the current deviation of each switching interval, the optimal switching state of the inverter can be determined. As a result, the proposed method is insensitive to the variations of the motor parameters. In addition, a satisfactory tracking ability of the current-loop control can be achieved. An adaptive inverse controller, which includes adaptive modelling and adaptive control, is used as a speed-loop control to enhance the performance of the adjustable closed-loop speed control system, including fast transient responses, good load disturbance responses and satisfactory tracking responses. A digital signal processor (DSP), TMS-320LF-2407, is used to execute the predictive current control and the adaptive inverse controller. As a result, the hardware is very simple. Experimental results show that the proposed method can effectively improve the performance of an IPMSM drive.

[1]  S. Bolognani,et al.  Model Predictive Direct Speed Control with Finite Control Set of PMSM Drive Systems , 2013, IEEE Transactions on Power Electronics.

[2]  M.N. Uddin,et al.  Online Parameter-Estimation-Based Speed Control of PM AC Motor Drive in Flux-Weakening Region , 2008, IEEE Transactions on Industry Applications.

[3]  Marcin Morawiec,et al.  The Adaptive Backstepping Control of Permanent Magnet Synchronous Motor Supplied by Current Source Inverter , 2013, IEEE Transactions on Industrial Informatics.

[4]  Alfio Consoli,et al.  An Effective Energy-Saving Scalar Control for Industrial IPMSM Drives , 2013, IEEE Transactions on Industrial Electronics.

[5]  Tian-Hua Liu,et al.  Position Control of an Interior Permanent-Magnet Synchronous Motor Without Using a Shaft Position Sensor , 2007, IEEE Transactions on Industrial Electronics.

[6]  M. Kadjoudj,et al.  A robust hybrid current control for permanent-magnet synchronous motor drive , 2004, IEEE Transactions on Energy Conversion.

[7]  Gilbert Hock Beng Foo,et al.  Direct Torque Control of an IPM-Synchronous Motor Drive at Very Low Speed Using a Sliding-Mode Stator Flux Observer , 2010, IEEE Transactions on Power Electronics.

[8]  HongZhe Jin,et al.  An RMRAC Current Regulator for Permanent-Magnet Synchronous Motor Based on Statistical Model Interpretation , 2009, IEEE Trans. Ind. Electron..

[9]  R D Lorenz,et al.  Evaluating the practical low speed limits for back-EMF tracking-based sensorless speed control using drive stiffness as a key metric , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[10]  Jun Zheng,et al.  An online calibrating method for middle value of current measurement circuit in permanent magnet synchronous motor drives , 2009, 2009 Asia-Pacific Conference on Computational Intelligence and Industrial Applications (PACIIA).

[11]  M N Uddin,et al.  An Adaptive-Filter-Based Torque-Ripple Minimization of a Fuzzy-Logic Controller for Speed Control of IPM Motor Drives , 2011, IEEE Transactions on Industry Applications.

[12]  Mohammad Nasir Uddin,et al.  Performance Analysis of an FLC-Based Online Adaptation of Both Hysteresis and PI Controllers for IPMSM Drive , 2012 .

[13]  Yasser Abdel-Rady I. Mohamed,et al.  A Newly Designed Instantaneous-Torque Control of Direct-Drive PMSM Servo Actuator With Improved Torque Estimation and Control Characteristics , 2007, IEEE Transactions on Industrial Electronics.

[14]  Casey B. Butt,et al.  Simplified fuzzy logic based MTPA speed control of IPMSM drive , 2003 .

[15]  F. Blaabjerg,et al.  “Active Flux” DTFC-SVM Sensorless Control of IPMSM , 2009, IEEE Transactions on Energy Conversion.

[16]  Jung-Ik Ha,et al.  Current Prediction in Vector-Controlled PWM Inverters Using Single DC-Link Current Sensor , 2010, IEEE Transactions on Industrial Electronics.

[17]  Robert D. Lorenz,et al.  Discrete-Time Current Regulator Design for AC Machine Drives , 2010 .

[18]  Seung-Ki Sul,et al.  A compensation method for time delay of full digital synchronous frame current regulator of PWM AC drives , 2001, Conference Record of the 2001 IEEE Industry Applications Conference. 36th IAS Annual Meeting (Cat. No.01CH37248).

[19]  Frede Blaabjerg,et al.  Super-twisting sliding mode control of torque and flux in permanent magnet synchronous machine drives , 2013, IECON 2013 - 39th Annual Conference of the IEEE Industrial Electronics Society.

[20]  M.N. Uddin,et al.  Development and Implementation of a New Adaptive Intelligent Speed Controller for IPMSM Drive , 2007, 2007 IEEE Industry Applications Annual Meeting.

[21]  M. A. Rahman,et al.  Untrained Artificial Neuron-Based Speed Control of Interior Permanent-Magnet Motor Drives Over Extended Operating Speed Range , 2013, IEEE Transactions on Industry Applications.

[22]  Leila Parsa,et al.  Model reference adaptive control of five-phase IPM Motors based on neural network , 2012, 2011 IEEE International Electric Machines & Drives Conference (IEMDC).

[23]  E.F. El-Saadany,et al.  A Current Control Scheme With an Adaptive Internal Model for Torque Ripple Minimization and Robust Current Regulation in PMSM Drive Systems , 2008, IEEE Transactions on Energy Conversion.

[24]  Mark Sumner,et al.  A Fast Adaptive Memetic Algorithm for Online and Offline Control Design of PMSM Drives , 2007, IEEE Transactions on Systems, Man, and Cybernetics, Part B (Cybernetics).

[25]  Sung-Yoon Jung,et al.  Current Minimizing Torque Control of the IPMSM Using Ferrari’s Method , 2013, IEEE Transactions on Power Electronics.

[26]  Shigeo Morimoto,et al.  Examination and Linearization of Torque Control System for Direct Torque Controlled IPMSM , 2010 .

[27]  M. Azizur Rahman,et al.  A Novel Neuro-Wavelet-Based Self-Tuned Wavelet Controller for IPM Motor Drives , 2010 .