On the calculation of leakage and friction of reciprocating elastomeric seals

• A submitted manuscript is the author's version of the article upon submission and before peer-review. There can be important differences between the submitted version and the official published version of record. People interested in the research are advised to contact the author for the final version of the publication, or visit the DOI to the publisher's website. • The final author version and the galley proof are versions of the publication after peer review. • The final published version features the final layout of the paper including the volume, issue and page numbers.

[1]  Marnix Visscher,et al.  Lubrication of reciprocating seals: Experiments on the influence of surface roughness on friction and leakage , 1989 .

[2]  C. J. Hooke,et al.  Elastohydrodynamic Lubrication of Soft, Highly Deformed Contacts: , 1972 .

[3]  J. F. Booker,et al.  A Table of the Journal-Bearing Integral , 1965 .

[4]  A. F. George,et al.  Stress fields in a compressed unconstrained elastomeric O-ring seal and a comparison of computer predictions and experimental results , 1987 .

[5]  Antonio Strozzi,et al.  A Study of the Elastohydrodynamic Problem in Rectangular Elastomeric Seals , 1984 .

[6]  P. Nayak,et al.  Random Process Model of Rough Surfaces , 1971 .

[7]  H. Saunders,et al.  Finite element procedures in engineering analysis , 1982 .

[8]  David E Dobbs,et al.  A modern course on the theory of equations , 1980 .

[9]  Hans L. Johannesson.  Oil Leakage and Friction Forces of Reciprocating O-Ring Seals Considering Cavitation , 1983 .

[10]  M. J. Newton.  Basic lubrication theory (2nd edition): by Alastair Cameron. Ellis Horwood Series in Engineering Science, Chichester, 1976. xx + 195 pages, ISBN 0-85312-057-9, hardback £8.00 , 1980 .

[11]  Athanasios Papoulis,et al.  Probability, Random Variables and Stochastic Processes , 1965 .

[12]  H. Blok,et al.  Inverse problem in hydrodynamic lubrication and design directives for lubricated flexible surfaces , 1963 .

[13]  A. Karaszkiewicz.  Hydrodynamic lubrication of rubber seals for reciprocating motion; leakage of seals with an O-ring , 1988 .

[14]  A. A. Lubrecht,et al.  The numerical solution of the elastohydrodynamically lubricated line- and point contact problem, using multigrid techniques , 1987 .

[15]  Antonio Strozzi.  Elastohydrodynamic Lubrication in Elastomeric Reciprocating Seals , 1983 .

[16]  H. Cheng,et al.  An Average Flow Model for Determining Effects of Three-Dimensional Roughness on Partial Hydrodynamic Lubrication , 1978 .

[17]  D. J. Montgomery,et al.  The physics of rubber elasticity , 1949 .

[18]  Antonio Strozzi,et al.  Analysis of an Unpressurized, Laterally Restrained, Elastomeric O-Ring Seal , 1988 .

[19]  E. Kassfeldt,et al.  Calculation of the pressure distribution in an arbitrary elastomeric seal contact , 1989 .

[20]  Antonio Strozzi.  Static Stresses in an Unpressurized, Rounded, Rectangular, Elastomeric Seal , 1986 .

[21]  Antonio Strozzi,et al.  Mechanical analysis of elastomeric seals by numerical methods , 1984 .

[22]  H. Cheng,et al.  Application of Average Flow Model to Lubrication Between Rough Sliding Surfaces , 1979 .

[23]  B. S. Nau,et al.  Performance variation in reciprocating rubber seals for fluid power applications , 1988 .

[24]  H. Sugawara,et al.  Piston seal for modern automotive braking system , 1988 .

[25]  P. Chadwick.  Continuum Mechanics: Concise Theory and Problems , 1976 .

[26]  Antonio Strozzi,et al.  Theoretical analysis of an unpressurized elastomeric O-ring seal inserted into a rectangular groove , 1989 .

[27]  A. Roberts,et al.  The elastohydrodynamic lubrication of a highly elastic cylindrical surface , 1969 .

[28]  R. Bosma,et al.  The Influence of Longitudinal and Transverse Roughness on the Elastohydrodynamic Lubrication of Circular Contacts , 1988 .

[29]  A. Collings,et al.  Discussion on a paper by D. D. liou , 1983 .

[30]  R. Ogden.  Non-Linear Elastic Deformations , 1984 .

[31]  K Klaus Witt.  Die Berechnung physikalischer und thermodynamischer Kennwerte von Druckflüssigkeiten, sowie die Bestimmung des Gesamtwirkungsgrades an Pumpen unter Berücksichtigung der Thermodynamik für die Druckflüssigkeit , 1974 .

[32]  W. F. Hughes,et al.  An Elastohydrodynamic Analysis of Preloaded Sliding Seals , 1984 .

[33]  Marnix Visscher,et al.  Literature review and discussion on measurements of leakage, lubricant film thickness and friction of reciprocating elastomeric seals© , 1990 .

[34]  B. S. Nau,et al.  A Theoretical Study of the Elastohydrodynamic Lubrication of Reciprocating Rubber Seals , 1975 .

[35]  J. Peklenik,et al.  Paper 24: New Developments in Surface Characterization and Measurements by Means of Random Process Analysis: , 1967 .

[36]  H. Blok,et al.  The ‘Breathing’ Film between a Flexible Seal and a Reciprocating Rod: , 1965 .

[37]  I. Miller.  Probability, Random Variables, and Stochastic Processes , 1966 .

[38]  C. J. Hooke,et al.  The Elastohydrodynamic Lubrication of Heavily Loaded Point Contacts , 1977 .

[40]  Hans L Johannesson,et al.  Paper XVIII(i) The influence of back-up rings on the hydrodynamic behaviour of hydraulic cylinder seals , 1985 .