论文信息 - The Impact of Surface Errors on the Location and Orientation of a Cylindrical Workpiece in a Fixture

The Impact of Surface Errors on the Location and Orientation of a Cylindrical Workpiece in a Fixture

Surface error at the contact region is one factor that contributes to the displacement of the workpiece in a fixture. This work employs the Newton-Raphson technique to develop a mathematical model that predicts the impact of surface errors on the location and orientation of a cylindrical workpiece. Model validation and measurement analysis were conducted to verify the proposed mathematical model. An experimental fixture and workpiece were developed to simulate the effect of surface errors on the placement of a workpiece. The study showed that the numerical model is reliable in predicting the behavior of the workpiece.

Frank Peters | Supapan Sangnui | Supapan Sangnui | F. Peters

[1] Lucy Siu-Bik King,et al. Theoretical approach for generating optimal fixturing locations for prismatic workparts in automated assembly , 1993 .

[2] Amy J. C. Trappey,et al. Fixture configuration using projective geometry , 1993 .

[3] Jingxia Yuan,et al. Deformable Sheet Metal Fixturing: Principles, Algorithms, and Simulations , 1996 .

[4] E. C. DeMeter,et al. Restraint Analysis of Fixtures Which Rely on Surface Contact , 1994 .

[5] E. C. DeMeter. The Min-Max Load Criteria as a Measure of Machining Fixture Performance , 1994 .

[6] E. C. De Meter,et al. Min-Max Load Model for Optimizing Machining Fixture Performance , 1995 .

[7] E. C. De Meter,et al. The Application of Meta Functions to the Quasi-Static Analysis of Workpiece Displacement Within a Machining Fixture , 1996 .

[8] Yiming Rong,et al. Machining Accuracy Analysis for Computer-Aided Fixture Design , 1996 .

[9] S. Jack Hu,et al. A Variational Method of Robust Fixture Configuration Design for 3-D Workpieces , 1997 .

[10] E. C. De Meter,et al. The application of tool path compensation for the reduction of clampinginduced geometric errors , 1997 .