Earlywood and latewood elastic properties in loblolly pine

Abstract The elastic properties of earlywood and latewood and their variability were measured in 388 specimens from six loblolly pine trees in a commercial plantation. Properties measured included longitudinal modulus of elasticity, shear modulus, specific gravity, microfibril angle and presence of compression wood. Novel testing procedures were developed to measure properties from specimens of 1 mm×1 mm×30 mm from earlywood or latewood. The elastic properties varied substantially circumferentially around a given ring and this variation was nearly as large as the variation across rings. The elastic properties varied by ring and height, but while the modulus of elasticity increased with height, the shear modulus decreased with height. A strong correlation was found between modulus of elasticity and shear modulus, but only at low heights and inner rings. Specific gravity and microfibril angle were the strongest predictors of elastic properties and explained 75% of the variation in modulus of elasticity for latewood. Despite being the best predictors in this study, these parameters accounted for less than half of the variability of earlywood modulus of elasticity, earlywood shear modulus and latewood shear modulus.

[1]  D. Kretschmann,et al.  Longitudinal shrinkage in fast-grown loblolly pine plantation wood , 1994 .

[2]  Philip R. Larson,et al.  Wood Formation and the Concept of Wood Quality , 1969 .

[3]  S. Timoshenko,et al.  Theory of Elasticity (3rd ed.) , 1970 .

[4]  Evangelos J. Biblis,et al.  Transitional variation and relationships among properties within loblolly pine growth rings , 1969, Wood Science and Technology.

[5]  C. W. McMillin.  Morphological characteristics of loblolly pine wood as related to specific gravity, growth rate and distance from pith , 1968, Wood Science and Technology.

[6]  I. D. Cave.  Theory of X-ray measurement of microfibril angle in wood , 1997, Wood Science and Technology.

[7]  D. Kretschmann,et al.  Variations of microfibril angle in loblolly pine: comparison of iodine crystallization and x-ray diffraction techniques , 1998 .

[8]  Stephen M. Shaler,et al.  Mechanical Properties Of Individual Southern Pine Fibers. Part II. Comparison Of Earlywood And Latewood Fibers With Respect To Tree Height And Juvenility , 2002 .

[9]  R. E. Booker.  Variation of Young's modulus with microfibril angle, density and spiral grain. , 1998 .

[10]  S. Shaler,et al.  Mechanical properties of individual southern pine fibers. Part I. Determination and variability of stress-strain curves with respect to tree height and juvenility , 2002 .

[11]  R. C. Purnell,et al.  Genetic parameter estimates for wood density, transition age, and radial growth in slash pine , 1993 .

[12]  Robert A. Megraw,et al.  Wood Quality Factors in Loblolly Pine: The Influence of Tree Age, Position in Tree, and Cultural Practice on Wood Specific Gravity, Fiber Length, and Fibril Angle , 1997 .

[13]  C. P. Chen,et al.  Apparatus for Determining the Viscoelastic Properties of Materials Over Ten Decades of Frequency and Time , 1989 .

[14]  Leslie H. Groom,et al.  Mechanical properties of individual southern pine fibers. Part III. Global relationships between fiber properties and fiber location within an individual tree. , 2002 .

[15]  Peter Fratzl,et al.  Size and Arrangement of Elementary Cellulose Fibrils in Wood Cells: A Small-Angle X-Ray Scattering Study of Picea abies , 1994 .

[16]  P. Fratzl,et al.  Determination of spiral angles of elementary fibrils in the wood cell wall: comparison of small-angle X-ray scattering and wide-angle X-ray diffraction. , 1998 .

[17]  R. Lakes,et al.  Apparatus for measuring viscoelastic properties over ten decades: Refinements , 1995 .

[18]  I. D. Cave.  Theory of X-ray measurement of microfibril angle in wood , 1997, Wood Science and Technology.