Antennas for IoT Application

[1]  J. Raynolds,et al.  Plasma Frequency Selective Surfaces , 2007, IEEE Transactions on Plasma Science.

[2]  P. Nenzi,et al.  On-chip THz 3D antennas , 2012, 2012 IEEE 62nd Electronic Components and Technology Conference.

[3]  Eva Rajo-Iglesias,et al.  Design and experimental verification of ridge gap waveguide in bed of nails for parallel-plate mode suppression , 2011 .

[4]  Tatsuo Itoh,et al.  Metamaterial-Based Antennas , 2012, Proceedings of the IEEE.

[5]  Sima Noghanian,et al.  Developing flexible 3D printed antenna using conductive ABS materials , 2015, 2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting.

[6]  Sylvain Collardey,et al.  Wearable monopole zip antenna , 2011 .

[7]  Tanweer Ali,et al.  A compact multiband antenna using λ/4 rectangular stub loaded with metamaterial for IEEE 802.11N and IEEE 802.16E , 2017 .

[8]  Jaehoon Choi,et al.  A polarization reconfigurable textile patch antenna for wearable IoT applications , 2017, 2017 International Symposium on Antennas and Propagation (ISAP).

[9]  N. Kundtz,et al.  Metamaterial surface antenna technology: Commercialization through diffractive metamaterials and liquid crystal display manufacturing , 2016, 2016 10th International Congress on Advanced Electromagnetic Materials in Microwaves and Optics (METAMATERIALS).

[10]  Mongi Lahiani,et al.  Design of rectangular microstrip patch antenna , 2016, 2016 2nd International Conference on Advanced Technologies for Signal and Image Processing (ATSIP).

[11]  F. Ferrero,et al.  Design of miniature antennas for IoT applications , 2016, 2016 IEEE Sixth International Conference on Communications and Electronics (ICCE).

[12]  I. Alexeff,et al.  Recent results for plasma antennas , 2008 .

[14]  Pedro Pinho,et al.  Smart Coat with a Fully-Embedded Textile Antenna for IoT Applications , 2016, Sensors.

[15]  Gaetano Marrocco,et al.  RFID Technology for IoT-Based Personal Healthcare in Smart Spaces , 2014, IEEE Internet of Things Journal.

[16]  Hang Wong,et al.  Dual-Band Dual-Mode Button Antenna for On-Body and Off-Body Communications , 2017, IEEE Transactions on Biomedical Circuits and Systems.

[17]  Benito Sanz-Izquierdo,et al.  3-D Printing of Conformal Antennas for Diversity Wrist Worn Applications , 2018, IEEE Transactions on Components, Packaging and Manufacturing Technology.

[18]  Nuno B. Carvalho,et al.  Textile antenna for electromagnetic energy harvesting for GSM900 and DCS1800 bands , 2013, 2013 IEEE Antennas and Propagation Society International Symposium (APSURSI).

[19]  Apostolos Georgiadis,et al.  Highly Integrable Paper-Based Harmonic Transponder for Low-Power and Long-Range IoT Applications , 2017, IEEE Antennas and Wireless Propagation Letters.

[20]  Mohsin Jamil,et al.  Ultra‐wideband antenna for wearable Internet of Things devices and wireless body area network applications , 2019, International Journal of Numerical Modelling: Electronic Networks, Devices and Fields.

[21]  Gaurav Varshney,et al.  Dual‐band circular polarisation generation technique with the miniaturisation of a rectangular dielectric resonator antenna , 2019, IET Microwaves, Antennas & Propagation.

[22]  M. Stubbs,et al.  A Ka-band narrow bandpass filter using LTCC technology , 2003, IEEE Microwave and Wireless Components Letters.

[23]  Cyril Luxey,et al.  On-body measurements of embroidered spiral antenna , 2015, 2015 Loughborough Antennas & Propagation Conference (LAPC).

[24]  Michael J. Lancaster,et al.  3‐D printed band‐pass combline filter , 2017 .

[25]  E. Abdallah,et al.  RF Energy Harvesting Using Transparent Antenna for IoT Application , 2019, 2019 International Conference on Innovative Trends in Computer Engineering (ITCE).

[26]  H. H. Abdullah,et al.  Compact Chipless RFID Tag Based on Fractal Antennas and Multiple Microstrip Open Stub Resonators , 2018, 2018 Progress in Electromagnetics Research Symposium (PIERS-Toyama).

[27]  Eva Rajo-Iglesias,et al.  Design Guidelines for Gap Waveguide Technology Based on Glide-Symmetric Holey Structures , 2017, IEEE Microwave and Wireless Components Letters.

[28]  Eva Rajo-Iglesias,et al.  Design of microwave circuits in ridge-gap waveguide technology , 2010, 2010 IEEE MTT-S International Microwave Symposium.

[29]  Ki Hwan Eom,et al.  The Vegetable Freshness Monitoring System Using RFID with Oxygen and Carbon Dioxide Sensor , 2012, Int. J. Distributed Sens. Networks.

[30]  Sunil Kumar,et al.  A Compact Dual Band Antenna for IOV Applications , 2015, IOV.

[31]  Sumeet Singh Bhatia,et al.  Design of fractal based microstrip rectangular patch antenna for multiband applications , 2015, 2015 IEEE International Advance Computing Conference (IACC).

[32]  Andrea Massa,et al.  Fast design of multiband fractal antennas through a system-by-design approach for NB-IoT applications , 2019, EURASIP J. Wirel. Commun. Netw..

[33]  Á. Belenguer,et al.  A 3‐D Printed PCB Integrated TEM Horn Antenna , 2019, Radio Science.

[34]  Manos M. Tentzeris,et al.  Progress Towards the First Wireless Sensor Networks Consisting of Inkjet-Printed, Paper-Based RFID-Enabled Sensor Tags , 2010, Proceedings of the IEEE.