Stochastic Damage Evolution and Failure in Fiber-Reinforced Composites

[1]  W. Curtin,et al.  Tensile Strength of Fiber-Reinforced Composites: I. Model and Effects of Local Fiber Geometry , 1998 .

[2]  W. Curtin,et al.  Tensile Strength of Fiber-Reinforced Composites: II. Application to Polymer Matrix Composites , 1998 .

[3]  I. Beyerlein,et al.  Time evolution of stress redistribution around multiple fiber breaks in a composite with viscous and viscoelastic matrices , 1998 .

[4]  W. Curtin,et al.  Tensile strength of titanium matrix composites: Direct numerical simulations and analytic models , 1998 .

[5]  N. Takeda,et al.  Modeling brittle and tough stress–strain behavior in unidirectional ceramic matrix composites , 1998 .

[6]  W. Curtin.  SIZE SCALING OF STRENGTH IN HETEROGENEOUS MATERIALS , 1998 .

[7]  S. Kampe,et al.  Mechanical behavior of glass and blackglas® ceramic matrix composites , 1997 .

[8]  F. Leckie,et al.  Strength variability in alumina fiber-reinforced aluminum matrix composites , 1997 .

[9]  W. Curtin,et al.  Strength and reliability of notched fiber-reinforced composites , 1997 .

[10]  N. Iyengar,et al.  Time-dependent failure in fiber-reinforced composites by matrix and interface shear creep , 1997 .

[11]  William A. Curtin,et al.  Strength and reliability of fiber-reinforced composites: Localized load-sharing and associated size effects , 1997 .

[12]  S. Leigh Phoenix,et al.  Statistics of fracture for an elastic notched composite lamina containing weibull fibers—Part II. Probability models of crack growth , 1997 .

[13]  S. Leigh Phoenix,et al.  STATISTICS OF FRACTURE FOR AN ELASTIC NOTCHED COMPOSITE LAMINA CONTAINING WEIBULL FIBERS-PART I. FEATURES FROM MONTE-CARLO SIMULATION , 1997 .

[14]  W. Curtin.  Toughening in disordered brittle materials , 1997 .

[15]  N. Iyengar,et al.  Time-dependent failure in fiber-reinforced composites by fiber degradation , 1997 .

[16]  Chung-Yuen Hui,et al.  Size effects in the distribution for strength of brittle matrix fibrous composites , 1997 .

[17]  W. Curtin,et al.  Strain and hysteresis by stochastic matrix cracking in ceramic matrix composites , 1997 .

[18]  S. Leigh Phoenix,et al.  Stress concentrations around multiple fiber breaks in an elastic matrix with local yielding or debonding using quadratic influence superposition , 1996 .

[19]  S. Phoenix,et al.  Analysis of fragmentation in the single filament composite: Roles of fiber strength distributions and exclusion zone models , 1996 .

[20]  H. Tsuda,et al.  Fracture Process of Silicon Carbide Fiber-Reinforced Glasses , 1996 .

[21]  William A. Curtin,et al.  Damage-enhanced creep and rupture in fiber-reinforced composites , 1996 .

[22]  A. Caliskan.  Micromechanics-based approach to predict strength and stiffness of composite materials , 1996 .

[23]  A. Sastry,et al.  Comparison of shear-lag theory and continuum fracture mechanics for modeling fiber and matrix stresses in an elastic cracked composite lamina , 1996 .

[24]  F. Zok,et al.  High temperature deformation and fracture of a fiber reinforced titanium matrix composite , 1996 .

[25]  B. Majumdar,et al.  Interface Measurements and Applications in Fiber-Reinforced MMCs , 1995 .

[26]  Anthony G. Evans,et al.  Tensile and shear properties of continuous fiber-reinforced SiC/Al2O3 composites processed by melt oxidation , 1995 .

[27]  Richard L. Smith,et al.  An exact closed form solution for fragmentation of Weibull fibers in a single filament composite with applications to fiber-reinforced ceramics , 1995 .

[28]  Brian N. Cox,et al.  A binary model of textile composites—II. The elastic regime , 1995 .

[29]  William A. Curtin,et al.  Failure of fiber composites: A lattice Green function model , 1995 .

[30]  S. Phoenix,et al.  Scalings in the statistical failure of brittle matrix composites with discontinuous fibers—I. Analysis and Monte Carlo simulations , 1995 .

[31]  Anand Jagota,et al.  Element breaking rules in computational models for brittle fracture , 1995 .

[32]  S. Phoenix,et al.  Creep rupture of brittle matrix composites reinforced with time dependent fibers: Scalings and Monte Carlo simulations , 1995 .

[33]  R. McMeeking,et al.  Creep models for metal matrix composites with long brittle fibers , 1995 .

[34]  H. Wadley,et al.  An ultimate tensile strength dependence on processing for consolidated metal matrix composites , 1995 .

[35]  A. Evans,et al.  Fatigue of ceramic matrix composites , 1995 .

[36]  S. J. Zhou,et al.  INFLUENCE OF PROCESSING DAMAGE ON PERFORMANCE OF FIBER-REINFORCED COMPOSITES , 1995 .

[37]  A. Evans,et al.  Crack deflection at an interface between dissimilar elastic materials: Role of residual stresses , 1994 .

[38]  R. McMeeking,et al.  Control of strength anisotropy of metal matrix fiber composites , 1994 .

[39]  Norman A. Fleck,et al.  A binary model of textile composites—I. Formulation , 1994 .

[40]  Anthony G. Evans,et al.  Inelastic strains due to matrix cracking in unidirectional fiber-reinforced composites , 1994 .

[41]  A. Ritter,et al.  A comparison of the mechanical properties and microstructures of intermetallic matrix composites fabricated by two different methods , 1994 .

[42]  H. Wadley,et al.  Fiber fracture during the consolidation of metal matrix composites , 1994 .

[43]  Duxbury,et al.  Fracture of heterogeneous materials with continuous distributions of local breaking strengths. , 1994, Physical review. B, Condensed matter.

[44]  B. Lawn,et al.  Making Ceramics "Ductile" , 1994, Science.

[45]  Yehuda Ben-Zion,et al.  Earthquake Failure Sequences Along a Cellular Fault Zone in a Three-Dimensional Elastic Solid Containing Asperity and Nonasperity Regions , 1993 .

[46]  J. Neumeister.  A constitutive law for continuous fiber reinforced brittle matrix composites with fiber fragmentation and stress recovery , 1993 .

[47]  A. Evans,et al.  THE ULTIMATE TENSILE STRENGTH OF METAL AND CERAMIC-MATRIX COMPOSITES , 1993 .

[48]  Y. Weitsman,et al.  Multi-fracture of ceramic composites , 1993 .

[49]  William A. Curtin,et al.  THE TOUGH TO BRITTLE TRANSITION IN BRITTLE MATRIX COMPOSITES , 1993 .

[50]  A. Evans,et al.  MECHANICAL-PROPERTIES OF CONTINUOUS-FIBER-REINFORCED CARBON MATRIX COMPOSITES AND RELATIONSHIPS TO CONSTITUENT PROPERTIES , 1992 .

[51]  Rishi Raj,et al.  Overview no. 100 Scalings in fracture probabilities for a brittle matrix fiber composite , 1992 .

[52]  F. A. Leckie,et al.  The mechanics of failure of silicon carbide fiber-reinforced glass-matrix composites , 1992 .

[53]  A. Evans,et al.  Damage and Failure in Unidirectional Ceramic–Matrix Composites , 1992 .

[54]  William A. Curtin,et al.  THEORY OF MECHANICAL-PROPERTIES OF CERAMIC-MATRIX COMPOSITES , 1991 .

[55]  William A. Curtin,et al.  Exact theory of fibre fragmentation in a single-filament composite , 1991 .

[56]  Lawrence T. Drzal,et al.  Fiber-Matrix Adhesion and Its Effect on Composite Mechanical Properties: II. Longitudinal (0°) and Transverse (90°) Tensile and Flexure Behavior of Graphite/Epoxy Composites , 1991 .

[57]  S. L. Phoenix,et al.  Weibull strength statistics for graphite fibres measured from the break progression in a model graphite/glass/epoxy microcomposite , 1991 .

[58]  L. Drzal,et al.  THE DEPENDENCE OF INTERFACIAL SHEAR STRENGTH ON MATRIX AND INTERPHASE PROPERTIES , 1991 .

[59]  O. Sbaizero,et al.  Effect of Interfaces on the Properties of Fiber‐Reinforced Ceramics , 1990 .

[60]  H. Wagner,et al.  Interpretation of the fragmentation phenomenon in single‐filament composite experiments , 1990 .

[61]  T. Chou,et al.  Explicit crack problem solutions of unidirectional composites - Elastic stress concentrations , 1990 .

[62]  S. Phoenix,et al.  Interfacial shear strength studies using the single‐filament‐composite test. Part II: A probability model and Monte Carlo simulation , 1989 .

[63]  S. Phoenix,et al.  Interfacial Shear Strength Studies Using the Single-Filament-Composite Test. I: Experiments on Graphite Fibers in Epoxy , 1989 .

[64]  J. P. Bell,et al.  Interfacial shear strength and failure modes of interphase-modified graphite-epoxy composites , 1989 .

[65]  Lorenz S. Sigl,et al.  Effect of Interface Mechanical Properties on Pullout in a SiC‐Fiber‐Reinforced Lithium Aluminum Silicate Glass‐Ceramic , 1989 .

[66]  M. Sutcu,et al.  Weibull statistics applied to fiber failure in ceramic composites and work of fracture , 1989 .

[67]  M. D. Thouless,et al.  Effects of pull-out on the mechanical properties of ceramic-matrix composites , 1988 .

[68]  V. Tewary,et al.  Theory of chemically induced kink formation on cracks in silica. I.3-D crack Green’s functions , 1987 .

[69]  K. Prewo.  Tension and flexural strength of silicon carbide fibre-reinforced glass ceramics , 1986 .

[70]  R. Arsenault,et al.  Interfaces in metal matrix composites , 1984 .

[71]  A. Dibenedetto,et al.  Evaluation of surface treatments for fibers in composite materials , 1983 .

[72]  S. L. Phoenix,et al.  Lower-tail approximations for the probability of failure of three-dimensional fibrous composites with hexagonal geometry , 1983, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences.

[73]  S. L. Phoenix,et al.  Probability distributions for the strength of composite materials IV: Localized load-sharing with tapering , 1983 .

[74]  S. Batdorf,et al.  Tensile Strength of Unidirectionally Reinforced Composites — I , 1982 .

[75]  S. L. Phoenix,et al.  Probability distributions for the strength of composite materials II: A convergent sequence of tight bounds , 1981 .

[76]  S. L. Phoenix,et al.  Asymptotic Distributions for the Failure of Fibrous Materials Under Series-Parallel Structure and Equal Load-Sharing , 1981 .

[77]  Vinod K. Tewary,et al.  Green-function method for lattice statics , 1973 .

[78]  R. Thomson,et al.  Lattice theory of fracture and crack creep , 1973 .

[79]  C. Zweben,et al.  A statistical theory of material strength with application to composite materials , 1969 .

[80]  A. Argon,et al.  Statistical Theory of Strength of Laminated Composites II , 1969 .

[81]  C. Zweben,et al.  Tensile failure of fiber composites. , 1968 .

[82]  John M. Hedgepeth,et al.  Local Stress Concentrations in Imperfect Filamentary Composite Materials , 1967 .

[83]  B. Widom,et al.  Random Sequential Addition of Hard Spheres to a Volume , 1966 .

[84]  A. Kelly,et al.  Tensile properties of fibre-reinforced metals: Copper/tungsten and copper/molybdenum , 1965 .

[85]  B. W. Rosen,et al.  Tensile failure of fibrous composites. , 1964 .

[86]  J. Gurland,et al.  Comparison of the statistics of two fracture modes , 1962 .

[87]  H. Daniels.  The statistical theory of the strength of bundles of threads. I , 1945, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[88]  T. Peijs,et al.  An experimental and numerical investigation into the single-fibre fragmentation test : stress transfer by a locally yielding matrix , 1997 .

[89]  D. B. Gundel,et al.  Experimental and theoretical assessment of the longitudinal tensile strength of unidirectional SiC-fiber/titanium-matrix composites , 1997 .

[90]  S. Jansson,et al.  Ultimate tensile strength of composites exhibiting fiber fragmentation , 1996 .

[91]  H. Fukuda,et al.  Micromechanical approach to the tensile strength of unidirectional composites , 1994 .

[92]  M. Wisnom,et al.  Three-dimensional finite element analysis of the stress concentration at a single fibre break , 1994 .

[93]  W. Curtin,et al.  Ultimate strengths of fibre-reinforced ceramics and metals , 1993 .

[94]  A. Sastry,et al.  Load redistribution near non-aligned fibre breaks in a two-dimensional unidirectional composite using break-influence superposition , 1993 .

[95]  William A. Curtin,et al.  Fiber pull-out and strain localization in ceramic matrix composites , 1993 .

[96]  D. Rouby,et al.  Fatigue behaviour related to interface modification during load cycling in ceramic-matrix fibre composites , 1993 .

[97]  S. Phoenix,et al.  Stress profiles around a fiber break in a composite with a nonlinear, power law creeping matrix , 1992 .

[98]  Michael R Wisnom,et al.  Relationship between strength variability and size effect in unidirectional carbon fibre/epoxy , 1991 .

[99]  K. Schulte,et al.  Strain concentration factors for fibers and matrix in unidirectional composites , 1991 .

[100]  Michael R Wisnom,et al.  The effect of specimen size on the bending strength of unidirectional carbon fibre-epoxy , 1991 .

[101]  P. Steif,et al.  A theory for the ultimate strength of a brittle-matrix composite , 1990 .

[102]  H. Suemasu.  Probabilistic aspects of strength of unidirectional fibre-reinforced composites with matrix failure , 1984 .

[103]  C. Zweben,et al.  Tensile failure analysis of fibrous composites. , 1968 .

[104]  W. Weibull.  A Statistical Distribution Function of Wide Applicability , 1951 .