Harvesting systems for poplar short rotation coppice

Abstract The harvesting of wood species intended for energy production is one of the critical steps for the establishment of an economically viable supply chain. The review examines the state of the art of the main systems for collecting the short rotation coppice (SRC) by referring to poplar (Populus spp.), one of the main energy species for southern Europe. Starting from the early experiences of willow (Salix spp.) in Sweden, over time two approaches have established: the cut-and-chip and the harvest-and-storage system. In the work, the pros and cons of the two systems are analyzed and their efficiency compared, giving also some indication about the next evolution of the machines. Emerging systems showing an interesting future potential as bales production or the development of small-scale tractor-powered harvesters are also described. Finally, some economic considerations on differences between harvesting cost for the cut-and-chip and harvest-and-storage system are reported.

[1]  Salvatore Cosentino,et al.  Future yields assessment of bioenergy crops in relation to climate change and technological development in Europe , 2012 .

[2]  D. Scordia,et al.  Potential land availability for energy crops production in Europe , 2010 .

[3]  Raffaele Spinelli,et al.  Wood chipping performance of a modified forager , 2013 .

[4]  Dominik Röser,et al.  Chipping operations and efficiency in different operational environments. , 2012 .

[5]  M. Manzone,et al.  Energetic and economic evaluation of a poplar cultivation for the biomass production in Italy. , 2009 .

[6]  Jacopo Bacenetti,et al.  Economic, energetic and environmental impact in short rotation coppice harvesting operations. , 2012 .

[7]  Reinhart Ceulemans,et al.  Comparative analysis of harvesting machines on an operational high-density short rotation woody crop (SRWC) culture: One-process versus two-process harvest operation , 2013 .

[8]  G. Lechasseur And P. Savoie.  Cutting, bundling and chipping short-rotation willow , 2005 .

[9]  M. Manzone,et al.  Energy and economic evaluation of a poplar plantation for woodchips production in Italy , 2014 .

[10]  F. Gallucci,et al.  Storage dynamics and fuel quality of poplar chips. , 2014 .

[11]  Reinhart Ceulemans,et al.  Operational short rotation woody crop plantations : manual or mechanised harvesting? , 2015 .

[12]  S Verani,et al.  Analisi del lavoro della Claas Jaguar 880 con testata GBE-1 nella raccolta di un pioppeto da biomassa , 2010 .

[13]  Raffaele Spinelli,et al.  Open-Air Drying of Cut and Windrowed Short-Rotation Poplar Stems , 2015, BioEnergy Research.

[14]  Reinhart Ceulemans,et al.  Financial Analysis of the Cultivation of Short Rotation Woody Crops for Bioenergy in Belgium: Barriers and Opportunities , 2012, BioEnergy Research.

[15]  A. Hastings,et al.  Food vs. fuel: the use of land for lignocellulosic ‘next generation’ energy crops that minimize competition with primary food production , 2012 .

[16]  Alberto Assirelli,et al.  Effect of short rotation coppice plantation on the performance and chips quality of a self-propelled harvester , 2015 .

[17]  C. Mitchell,et al.  Short-rotation forestry – operations, productivity and costs based on experience gained in the UK , 1999 .

[18]  A. Scarfone,et al.  Innovative System for Medium Rotation Forestry Harvesting , 2013 .

[19]  Philippe Savoie,et al.  Harvest of Short-Rotation Woody Crops in Plantations with a Biobaler , 2013 .

[20]  Paolo Balsari,et al.  Small-scale storage techniques for fuel chips from short rotation forestry , 2013 .

[21]  S. González‐García,et al.  Present and future environmental impact of poplar cultivation in the Po Valley (Italy) under different crop management systems , 2012 .

[22]  R. Pecenka,et al.  Efficient harvest lines for Short Rotation Coppices (SRC) in agriculture and agroforestry. , 2014 .

[23]  Reinhart Ceulemans,et al.  Energy and greenhouse gas balance of bioenergy production from poplar and willow: a review , 2011 .

[24]  T. Hoffmann,et al.  Harvest technology for short rotation coppices and costs of harvest, transport and storage , 2015 .

[25]  Raffaele Spinelli,et al.  Harvesting techniques for non-industrial biomass plantations , 2012 .

[26]  Edwin S. Miyata,et al.  Determining fixed and operating costs of logging equipment. , 1980 .

[27]  Natascia Magagnotti,et al.  Upsized Harvesting Technology for Coping with the New Trends in Short-Rotation Coppice , 2011 .

[28]  A. Monti,et al.  Perennial Grasses and their Importance as Bioenergy Crops In EU27 , 2011 .

[29]  Gero Becker,et al.  Harvesting of short rotation coppice - harvesting trials with a cut and storage system in Germany. , 2012 .

[30]  V. Civitarese,et al.  Influence of chipping device and storage method on the quality of SRC poplar biomass. , 2013 .

[31]  C. P. Mitchell,et al.  New cultural treatments and yield optimisation , 1995 .

[32]  Rien Visser,et al.  Analyzing and estimating delays in wood chipping operations. , 2009 .

[33]  N. Magagnotti,et al.  Determining the impact of some wood characteristics on the performance of a mobile chipper , 2011 .

[34]  L. Eliasson,et al.  Comparing the efficiency of drum and disc chippers , 2013 .

[35]  R. Spinelli,et al.  Wood chips size distribution in relation to blade wear and screen use , 2010 .

[36]  Bryce J. Stokes,et al.  Mechanisation of short rotation forestry , 1995 .

[37]  Stefan Seuring,et al.  Supply chain and logistics issues of bio-energy production. , 2011 .

[38]  Natascia Magagnotti,et al.  Using modified foragers to harvest short-rotation poplar plantations , 2009 .

[39]  Gero Becker,et al.  New Holland Forage Harvester’s Productivity in Short Rotation Coppice: Evaluation of Field Studies from a German Perspective , 2012 .

[40]  H. W. Elbersen,et al.  Agronomic aspects of future energy crops in Europe , 2010 .

[41]  Alberto Assirelli,et al.  Effect of piece size and tree part on chipper performance , 2013 .