A study of soft and hard breakdown - Part I: Analysis of statistical percolation conductance

A theory of the statistical origin of soft and hard breakdown, that can explain a wide range of experimental data, is proposed. The theory is based on the simple premise that the severity of breakdown depends on the magnitude of the power dissipation through the sample-specific, statistically distributed percolation conductance, rather than on any physical difference between the traps involved. This model (a) establishes the connection between the statistical distribution of the theoretically predicted percolation conductance and the distribution of experimentally measured conductances after soft breakdown (Part I), and (b) explains the thickness, voltage, stress, and circuit configuration dependence of soft and hard breakdown (Part II). Connections to previous theories are made explicit, and contradictions to alternate models are resolved.

[1]  B. Weir,et al.  A study of soft and hard breakdown - Part II: Principles of area, thickness, and voltage scaling , 2002 .

[2]  Stephan A. Cohen,et al.  Gate oxide breakdown under Current Limited Constant Voltage Stress , 2000, 2000 Symposium on VLSI Technology. Digest of Technical Papers (Cat. No.00CH37104).

[3]  Jordi Suñé,et al.  Failure physics of ultra-thin SiO2 gate oxides near their scaling limit , 2000 .

[4]  K. Okada.  The gate oxide lifetime limited by `B-mode' stress induced leakage current and the scaling limit of silicon dioxides in the direct tunnelling regime , 2000 .

[5]  Bin Wang,et al.  Temperature dependence of soft breakdown and wear-out in sub-3 nm SiO/sub 2/ films , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[6]  A. Ghetti,et al.  Field acceleration for oxide breakdown-can an accurate anode hole injection model resolve the E vs. 1/E controversy? , 2000, 2000 IEEE International Reliability Physics Symposium Proceedings. 38th Annual (Cat. No.00CH37059).

[7]  J. Bude,et al.  Explanation of soft and hard breakdown and its consequences for area scaling , 1999, International Electron Devices Meeting 1999. Technical Digest (Cat. No.99CH36318).

[8]  A. Ghetti,et al.  An anode hole injection percolation model for oxide breakdown-the "doom's day" scenario revisited , 1999, International Electron Devices Meeting 1999. Technical Digest (Cat. No.99CH36318).

[9]  Salvatore Lombardo,et al.  Degradation and hard breakdown transient of thin gate oxides in metal–SiO2–Si capacitors: Dependence on oxide thickness , 1999 .

[10]  J. Stathis.  Percolation models for gate oxide breakdown , 1999 .

[11]  Jordi Suñé,et al.  Modeling the breakdown spots in silicon dioxide films as point contacts , 1999 .

[12]  A. Toriumi,et al.  Dielectric breakdown mechanism of thin-SiO/sub 2/ studied by the post-breakdown resistance statistics , 1999, 1999 Symposium on VLSI Technology. Digest of Technical Papers (IEEE Cat. No.99CH36325).

[13]  I. Eisele,et al.  Influence of soft breakdown on NMOSFET device characteristics , 1999, 1999 IEEE International Reliability Physics Symposium Proceedings. 37th Annual (Cat. No.99CH36296).

[14]  P.J. Silverman,et al.  Explanation of stress-induced damage in thin oxides , 1998, International Electron Devices Meeting 1998. Technical Digest (Cat. No.98CH36217).

[15]  W. Abadeer,et al.  Structural dependence of dielectric breakdown in ultra-thin gate oxides and its relationship to soft breakdown modes and device failure , 1998, International Electron Devices Meeting 1998. Technical Digest (Cat. No.98CH36217).

[16]  J. Stathis,et al.  Reliability projection for ultra-thin oxides at low voltage , 1998, International Electron Devices Meeting 1998. Technical Digest (Cat. No.98CH36217).

[17]  Tanya Nigam,et al.  Soft breakdown in ultrathin gate oxides: Correlation with the percolation theory of nonlinear conductors , 1998 .

[18]  J. McPherson,et al.  UNDERLYING PHYSICS OF THE THERMOCHEMICAL E MODEL IN DESCRIBING LOW-FIELD TIME-DEPENDENT DIELECTRIC BREAKDOWN IN SIO2 THIN FILMS , 1998 .

[19]  Felice Crupi,et al.  Electrical and thermal transient during dielectric breakdown of thin oxides in metal-SiO2-silicon capacitors , 1998 .

[20]  Guido Groeseneken,et al.  On the properties of the gate and substrate current after soft breakdown in ultrathin oxide layers , 1998 .

[21]  Guido Groeseneken,et al.  New insights in the relation between electron trap generation and the statistical properties of oxide breakdown , 1998 .

[22]  D. Hwang,et al.  Ultra-thin gate dielectrics: they break down, but do they fail? , 1997, International Electron Devices Meeting. IEDM Technical Digest.

[23]  Kenji Taniguchi,et al.  Electrical stress-induced variable range hopping conduction in ultrathin silicon dioxides , 1997 .

[24]  R. Degraeve,et al.  Reliability of Ultra-Thin Gate Oxide Below 3 nm in the Direct Tunneling Regime , 1997 .

[25]  M. Heyns,et al.  Soft Breakdown of Ultra-Thin Gate Oxide Layers , 1995, ESSDERC '95: Proceedings of the 25th European Solid State Device Research Conference.

[26]  Kenji Okada,et al.  New Dielectric Breakdown Model of Local Wearout in Ultra Thin Silicon Dioxides , 1995 .

[27]  J. Ruitenbeek,et al.  The signature of conductance quantization in metallic point contacts , 1995, Nature.

[28]  Byung Jin Cho,et al.  Quasi-breakdown of ultrathin gate oxide under high field stress , 1994, Proceedings of 1994 IEEE International Electron Devices Meeting.

[29]  C. Hu,et al.  Hole injection SiO/sub 2/ breakdown model for very low voltage lifetime extrapolation , 1994 .

[30]  Kenji Okada,et al.  New Experimental Findings on Stress Induced Leakage Current of Ultra Thin Silicon Dioxides , 1994 .

[31]  James Stasiak,et al.  Trap creation in silicon dioxide produced by hot electrons , 1989 .

[32]  B. Ridley.  Mechanism of electrical breakdown in SiO2 films , 1975 .

[33]  N. Klein,et al.  Switching and breakdown in films , 1971 .