Experimental study on energy consumption of computer numerical control machine tools

Machining processes are responsible for substantial environmental impacts due to their great energy consumption. Accurately characterizing the energy consumption of machining processes is a starting point to increase manufacturing energy efficiency and reduce their associated environmental impacts. The energy calculation of machining processes depends on the availability of energy supply data of machine tools. However, the energy supply can vary greatly among different types of machine tools so that it is difficult to obtain the energy data theoretically. The aim of this research was to investigate the energy characteristics and obtain the power models of computer numerical control (CNC) machine tools through an experimental study. Four CNC lathes, two CNC milling machines and one machining center were selected for experiments. Power consumption of non-cutting motions and material removal was measured and compared for the selected machine tools. Here, non-cutting motions include standby, cutting fluid spraying, spindle rotation and feeding operations of machine tools. Material removal includes turning and milling. Results show that the power consumption of non-cutting motions and milling is dependent on machine tools while the power consumption of turning is almost independent from the machine tools. The results imply that the energy saving potential of machining processes is tremendous.

[1]  Timothy G. Gutowski,et al.  An Environmental Analysis of Machining , 2004 .

[2]  Fernando Gomes de Almeida,et al.  Improving the environmental performance of machine-tools: influence of technology and throughput on the electrical energy consumption of a press-brake , 2011 .

[3]  Sami Kara,et al.  Unit process energy consumption models for material removal processes , 2011 .

[4]  Rajesh Kumar Bhushan,et al.  Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites , 2013 .

[5]  G. Boothroyd,et al.  Fundamentals of Metal Machining and Machine Tools , 1975 .

[6]  Sami Kara,et al.  An empirical model for predicting energy consumption of manufacturing processes: a case of turning process , 2011 .

[7]  Shun Jia,et al.  Therblig-based energy supply modeling of computer numerical control machine tools , 2014 .

[8]  Janet M. Twomey,et al.  Operational methods for minimization of energy consumption of manufacturing equipment , 2007 .

[9]  Yufeng Li,et al.  A framework for characterising energy consumption of machining manufacturing systems , 2014 .

[10]  S. R. S. Kalpakjian.  Manufacturing Processes for Engineering Materials , 1984 .

[11]  Christoph Herrmann,et al.  An Investigation into Fixed Energy Consumption of Machine Tools , 2011 .

[12]  Song Zhang,et al.  Empirical models and optimal cutting parameters for cutting forces and surface roughness in hard milling of AISI H13 steel , 2010 .

[13]  Paul Mativenga,et al.  Modelling of direct energy requirements in mechanical machining processes , 2013 .

[14]  Sangkee Min,et al.  Development of an energy consumption monitoring procedure for machine tools , 2012 .

[15]  I. Hanafi,et al.  Optimization of cutting conditions for sustainable machining of PEEK-CF30 using TiN tools , 2012 .

[16]  Shun Jia,et al.  Therblig-based energy demand modeling methodology of machining process to support intelligent manufacturing , 2014, J. Intell. Manuf..

[17]  John W. Sutherland,et al.  Life cycle analysis of grinding: a case study of non-cylindrical computer numerical control grinding via a unit-process life cycle inventory approach , 2012 .

[18]  Steven R Schmid Kalpakjian,et al.  Manufacturing Engineering and Technology , 1991 .

[19]  Tao Wu,et al.  Analysis and estimation of energy consumption for numerical control machining , 2012 .

[20]  Paul Xirouchakis,et al.  Evaluating the use phase energy requirements of a machine tool system , 2011 .