Coupled-Inductor Filter: A Basic Filter Building Block

Coupled-magnetics and coupled-inductor filters provide smoothing in a power converter by steering ripple current away from the “quite port.” While this concept is not new, topologies claiming to be “new” or “novel” continue to be reported in the literature, suggesting that the ripple-steering phenomenon may not be well understood to be a property of the filter block itself. This paper describes a general coupled-inductor filter block and presents a brief history of its application starting with the earliest known version of the circuit, which dates back to a 1923 patent application. The coupled-inductor circuit model is reviewed, starting with the basic topology and ideal circuit elements. Real circuit elements are then considered along with the effects of equivalent series resistance and other parasitic elements. A circuit-based filtering approach is used to emphasize the filtering aspect of the coupled inductor. It will be seen that the coupled-inductor filter can exhibit a low pass with notch frequency response. This provides the ability to achieve extra attenuation at a particular frequency, such as the converter switching frequency, which can reduce the overall filtering burden without adding extra inductive components. When the filter components are treated as a functional circuit group, instead of an interconnection of inductors and capacitors, the coupled-inductor filter can be analyzed as a drop-in replacement wherever a smoothing choke would normally be used and does not depend on converter voltage waveforms. A topology transformation of the Ćuk converter shows that “zero ripple” in not a special property of the topology, but can be achieved using the coupled-inductor filter block.

[1]  Guangyong Zhu,et al.  Modeling and Analysis of Coupled Inductors in Power Converters , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[2]  Graham J. Scoles,et al.  Handbook of rectifier circuits , 1980 .

[3]  Jing Wang,et al.  Analysis of a ripple-free input-current boost converter with discontinuous conduction characteristics , 1997 .

[4]  Raul Rabinovici,et al.  New Single Unit Rectifier And dc-dc Converter , 2004, J. Circuits Syst. Comput..

[5]  Rudolf P. Severns,et al.  Modern DC-to-DC switchmode power converter circuits , 1985 .

[6]  T.C. Neugebauer,et al.  Filters and components with inductance cancellation , 2002, IEEE Transactions on Industry Applications.

[7]  E. Bloom.  New integrated-magnetic DC-DC power converter circuits & systems , 1987, 1987 IEEE Applied Power Electronics conference and Exposition.

[8]  Zhengyu Lu,et al.  Novel boost PFC with low common mode EMI: modeling and design , 2000, APEC 2000. Fifteenth Annual IEEE Applied Power Electronics Conference and Exposition (Cat. No.00CH37058).

[9]  Zhe Zhang,et al.  Coupled-inductor analysis and design , 1986, 1986 17th Annual IEEE Power Electronics Specialists Conference.

[10]  Jiann-Fuh Chen,et al.  A Novel High Step-Up DC–DC Converter for a Microgrid System , 2011, IEEE Transactions on Power Electronics.

[11]  Dong-Wook Yoo,et al.  Novel zero-voltage and zero-current-switching (ZVZCS) full bridge PWM converter with low output current ripple , 1997, Proceedings of Power and Energy Systems in Converging Markets.

[12]  T.C. Neugebauer,et al.  Parasitic capacitance cancellation in filter inductors , 2006, IEEE Transactions on Power Electronics.

[13]  Cheng Cheng,et al.  Design of coupled power inductors with crossed anisotropy magnetic core for integrated power conversion , 2012, 2012 Twenty-Seventh Annual IEEE Applied Power Electronics Conference and Exposition (APEC).

[14]  Marian K. Kazimierczuk,et al.  Self-capacitance of inductors , 1997 .

[15]  Simon Ostroznik,et al.  A Study of a Hybrid Filter , 2010, IEEE Transactions on Industrial Electronics.

[16]  Philip T. Krein,et al.  Automatic tuning of coupled inductor filters , 2002, 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289).

[17]  P. T. Krein,et al.  A 'zero' ripple technique applicable to any DC converter , 1999, 30th Annual IEEE Power Electronics Specialists Conference. Record. (Cat. No.99CH36321).

[18]  O. K. Marti,et al.  Mercury arc power rectifiers : theory and practice , 2022 .

[19]  Marian K. Kazimierczuk,et al.  High-Frequency Magnetic Components , 2009 .

[20]  Slobodan Cuk,et al.  A new optimum topology switching DC-to-DC converter , 1977, 1977 IEEE Power Electronics Specialists Conference.

[21]  D.K.W. Cheng,et al.  A new improved boost converter with ripple free input current using coupled inductors , 1998 .

[22]  Loman Rensink.  Switching regulator configurations and circuit realizations , 1980 .

[23]  Jung-Min Kwon,et al.  High-Efficiency Fuel Cell Power Conditioning System With Input Current Ripple Reduction , 2009, IEEE Transactions on Industrial Electronics.

[24]  Ching-Wen Tang,et al.  Design of Low-Temperature Co-Fired Ceramic Bandpass Filters With Modified Coupled Inductors , 2009 .

[25]  S.K. Mazumder,et al.  A Ripple-Mitigating and Energy-Efficient Fuel Cell Power-Conditioning System , 2007, IEEE Transactions on Power Electronics.

[26]  A.M. Knight,et al.  Single-Phase Multilevel PWM Inverter Topologies Using Coupled Inductors , 2009, IEEE Transactions on Power Electronics.

[27]  Claudio Adragna,et al.  Ripple steering AC-DC converters to minimize input filter , 2009, 2009 IEEE Energy Conversion Congress and Exposition.

[28]  R. Sevems,et al.  Circuit reinvention in power electronics and identification of prior work , 1997, Proceedings of APEC 97 - Applied Power Electronics Conference.

[29]  David J. Perreault,et al.  Filters with active tuning for power applications , 2001, 2001 IEEE 32nd Annual Power Electronics Specialists Conference (IEEE Cat. No.01CH37230).

[30]  Slobodan Cuk.  A new zero-ripple switching dc-to-dc converter and integrated magnetics , 1980, 1980 IEEE Power Electronics Specialists Conference.

[31]  Yung-Yaw Chen,et al.  A novel single stage push pull converter with integrated magnetics and ripple-free input current , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).

[32]  David J. Perreault,et al.  A fabrication method for integrated filter elements with inductance cancellation , 2007, APEC 07 - Twenty-Second Annual IEEE Applied Power Electronics Conference and Exposition.

[33]  D. Grimaldi,et al.  On circuit theory approach to evaluate the stray capacitances of two coupled inductors , 1993, 1993 IEEE Instrumentation and Measurement Technology Conference.

[34]  J. Arrillaga,et al.  The Smoothing Transformer: A New Concept in DC Side Harmonic Reduction of HVDC Schemes , 1996, IEEE Power Engineering Review.

[35]  Johann W. Kolar,et al.  Novel aspects of an application of 'zero'-ripple techniques to basic converter topologies , 1997, PESC97. Record 28th Annual IEEE Power Electronics Specialists Conference. Formerly Power Conditioning Specialists Conference 1970-71. Power Processing and Electronic Specialists Conference 1972.

[36]  Gordon Ed Bloom,et al.  The generalized use of integrated magnetics and zero-ripple techniques in switchmode power converters , 1984, 1984 IEEE Power Electronics Specialists Conference.

[37]  Ching-Wen Tang,et al.  Design of Low-Temperature Co-Fired Ceramic Bandpass Filters With Modified Coupled Inductors , 2009, IEEE Transactions on Microwave Theory and Techniques.

[38]  Reuben Lee.  Electronic transformers and circuits. , 1988 .

[39]  Philip T. Krein,et al.  COUPLED INDUCTORS – A BASIC FILTER BUILDING BLOCK , 2000 .

[40]  S. Feng,et al.  Small-capacitance nondissipative ripple filters for DC supplies , 1970 .

[41]  Johannes Pforr,et al.  Filter Optimization for multi-phase DC-DC converter in automotive energy backup system , 2009, 2009 Twenty-Fourth Annual IEEE Applied Power Electronics Conference and Exposition.

[42]  ?. ?. Landsman.  A unifying derivation of switching DC-DC converter topologies , 1979, 1979 IEEE Power Electronics Specialists Conference.

[43]  C. Chapelsky,et al.  Design of the Magnetic Components for High-Performance Multilevel Half-Bridge Inverter Legs , 2009, IEEE Transactions on Magnetics.

[44]  Jing Wang,et al.  Modified boost converter with continuous inductor current mode and ripple free input current , 1996, PESC Record. 27th Annual IEEE Power Electronics Specialists Conference.

[45]  L. Martinez-Salamero,et al.  Using magnetic coupling to eliminate right half-plane zeros in boost converters , 2004, IEEE Power Electronics Letters.

[47]  T.C. Neugebauer,et al.  Coupled-Magnetic Filters With Adaptive Inductance Cancellation , 2005, IEEE Transactions on Power Electronics.

[48]  C. Rudolph.  Hybrid drive system of an industrial truck using a three-phase DC-DC converter feeding ultra-capacitors , 2009, 2009 13th European Conference on Power Electronics and Applications.

[49]  F. Guinjoan,et al.  Ripple-reduction tuned filtering switching power converter topology , 2004, 2004 IEEE 35th Annual Power Electronics Specialists Conference (IEEE Cat. No.04CH37551).