Effects of suspension processing conditions on the multi-scale structural changes of photocured SiO2 bodies during sintering process: An operando observation using optical coherence tomography

[1]  Junichi Tatami,et al.  In situ observation of evolution of internal structure of alumina during sintering by swept‐source OCT , 2021, International Journal of Applied Ceramic Technology.

[2]  J. Adrien,et al.  Direct-ink writing of strong and biocompatible titanium scaffolds with bimodal interconnected porosity , 2021 .

[3]  S. Maruo,et al.  3D structuring of dense alumina ceramics using fiber-based stereolithography with interparticle photo-cross-linkable slurry , 2020 .

[4]  Shih-Hsien Chang,et al.  In situ TEM observation of the microstructural characteristics and mechanical properties of vacuum hot-press sintered Co–30Cr–6Mo alloys , 2020 .

[5]  Motoyuki Iijima,et al.  Rapid three-dimensional structuring of transparent SiO2 glass using interparticle photo-cross-linkable suspensions , 2020, Communications Materials.

[6]  N. Shikazono,et al.  Microstructure anisotropy of La0.6Sr0.4Co0.2Fe0.8O3- film on rigid Gd0.1Ce0.9O1.95 substrate during constrained sintering , 2019 .

[7]  T. Graule,et al.  Development of UV-curable ZrO2 slurries for additive manufacturing (LCM-DLP) technology , 2019, Journal of the European Ceramic Society.

[8]  K. Suganuma,et al.  In situ TEM observation of sintered Ag die-attach layer with added tungsten carbide particles while heating to high temperature , 2019, Japanese Journal of Applied Physics.

[9]  P. Colombo,et al.  Additive Manufacturing of ceramic components by Digital Light Processing: A comparison between the “bottom-up” and the “top-down” approaches , 2019, Journal of the European Ceramic Society.

[10]  M. Vlasea,et al.  Tailoring green and sintered density of pure iron parts using binder jetting additive manufacturing , 2018, Additive Manufacturing.

[11]  L. Tong,et al.  Additive manufacturing of silica glass using laser stereolithography with a top-down approach and fast debinding , 2018, RSC advances.

[12]  Adam Lewis,et al.  In situ process monitoring in selective laser sintering using optical coherence tomography , 2018, Optical engineering.

[13]  Haidong Wu,et al.  Fabrication of Complex-shaped Zirconia Ceramic Parts via a DLP- Stereolithography-based 3D printing method , 2018 .

[14]  F. Wakai,et al.  Influence of binder layer of spray-dried granules on occurrence and evolution of coarse defects in alumina ceramics during sintering , 2017 .

[15]  F. Wakai,et al.  Interface topology for distinguishing stages of sintering , 2017, Scientific Reports.

[16]  Rémi Tucoulou,et al.  Fast in situ 3D nanoimaging: a new tool for dynamic characterization in materials science , 2017 .

[17]  W. Bauer,et al.  Three-dimensional printing of transparent fused silica glass , 2017, Nature.

[18]  Z. Kato,et al.  Coarse pore evolution in dry-pressed alumina ceramics during sintering , 2016 .

[19]  David T. D. Childs,et al.  Evaluation of selective laser sintering processes by optical coherence tomography , 2015 .

[20]  Zhangwei Chen,et al.  Analyses of microstructural and elastic properties of porous SOFC cathodes based on focused ion beam tomography , 2015, 1502.00569.

[21]  Xiaofang Hu,et al.  In situ investigation on the mixed-interaction mechanisms in the metal–ceramic system’s microwave sintering , 2014 .

[22]  Robert Liska,et al.  Lithography‐Based Additive Manufacturing of Cellular Ceramic Structures , 2012 .

[23]  R. Podor,et al.  In Situ HT‐ESEM Observation of CeO2 Grain Growth During Sintering , 2012 .

[24]  G. Thollet,et al.  Improvements for imaging ceramics sintering in situ in ESEM , 2011, Journal of microscopy.

[25]  A. Krell,et al.  Transparent Tetragonal Yttria‐Stabilized Zirconia Ceramics: Influence of Scattering Caused by Birefringence , 2011 .

[26]  J. Baumard,et al.  Light scattering by pores in transparent Nd:YAG ceramics for lasers: correlations between microstructure and optical properties. , 2010, Optics express.

[27]  K. Uematsu,et al.  Effect of Organic Binder Segregation on Sintered Strength of Dry‐Pressed Alumina , 2006 .

[28]  Koji Ikuta,et al.  Three-dimensional microfabrication by use of single-photon-absorbed polymerization , 2000 .

[29]  Hideo Takahashi,et al.  Influence of Granule Character and Compaction on the Mechanical Properties of Sintered Silicon Nitride , 1996 .

[30]  B. Sheldon,et al.  In situ TEM sintering of nano-sized ZrO2 particles , 1995 .

[31]  F. F. Chamasemani,et al.  Multi-method characterization approach to facilitate a strategy to design mechanical and electrical properties of sintered copper , 2021 .