An Assessment of the Performance of Closed Cycles With and Without Heat Rejection at Cryogenic Temperatures

This paper presents optimized cycle performance that can be obtained with systems including a closed cycle gas turbine (CCGT). The influence of maximum temperature, minimum temperature, and recuperator effectiveness on cycle performance is illustrated. Several power-plant arrangements are analyzed and compared based on thermodynamic performance (thermal efficiency and specific work); enabling technologies (available at present); and developing technologies (available in the near term of future). The work includes the effects of utilization of high temperature ceramic heat exchangers and of coupling of CCGT systems with plants vaporizing liquid hydrogen (LH{sub 2}) or liquefied natural gas (LNG). Given the versatility of energy addition and rejection sources that can be utilized in closed gas-cycle systems, the thermodynamic performance of power plants shown in this paper indicate the remarkable capabilities and possibilities for closed gas-cycle systems.

[1]  Giacomo M. Bisio,et al.  Combined Helium and Combustion Gas Turbine Plant Exploiting Liquid Hydrogen (LH2) Physical Exergy , 1995 .

[2]  Hiroshi Miyata,et al.  Strength Design and Reliability Evaluation of a Hybrid Ceramic Stator Vane for Industrial Gas Turbines , 1995 .

[3]  Shinya Tanaka,et al.  Development of 300kW-Class Ceramic Gas Turbine (CGT301) Engine System , 1995 .

[4]  Paul G Lahaye,et al.  EXTERNALLY FIRED COMBUSTION CYCLE(EFCC)A DOE CLEAN COAL V PROJECT:EFFECTIVE MEANS OF REJUVENATION FOR OLDER COAL-FIRED STATIONS , 1994 .

[5]  H. Griepentrog,et al.  Vaporization of LNG With Closed-Cycle Gas Turbines , 1976 .

[6]  Theodosios Korakianitis,et al.  Models for the Prediction of Transients in Closed Regenerative Gas-Turbine Cycles With Centrifugal Impellers , 1994 .

[7]  N. Cerullo,et al.  Thermodynamic Analysis of Combined Plants Utilizing Helium Turbine with Nuclear Heating and Liquid Hydrogen Refrigerating , 1992 .

[8]  M Marini,et al.  Axial Flow Compressor Design Optimization: Part II—Throughflow Analysis , 1990 .

[9]  Ling Wang,et al.  Thermodynamic Study of an Indirect Fired Air Turbine Cogeneration System With Reheat , 1987 .

[10]  Aristide F. Massardo DESIGN AND PERFORMANCE EVALUATION OF A CBC SOLAR SPACE POWER SYSTEM: THE INFLUENCE OF ORBITAL AND SOLAR CONDITIONS , 1993 .

[11]  Allen D. Harper,et al.  Closed Brayton Cycle Engine Application to Emerging Unmanned Underwater Vehicle Missions , 1990 .

[12]  Robert V. Boyle,et al.  Solar Dynamic CBC Power for Space Station Freedom , 1990 .

[13]  John I. Hochstein,et al.  Prediction of the Transient Thermodynamic Response of a Closed-Cycle Regenerative Gas Turbine , 1993 .

[14]  Antonio Satta,et al.  Axial Flow Compressor Design Optimization: Part I—Pitchline Analysis and Multivariable Objective Function Influence , 1990 .

[15]  Xing L. Yan,et al.  DESIGN OF CLOSED-CYCLE HELIUM TURBINE NUCLEAR POWER PLANTS , 1993 .

[16]  D. E. Wright,et al.  Closed-cycle gas turbine working fluids , 1980 .

[17]  K. Vepa,et al.  Heat Exchanger Design Considerations for Gas Turbine HTGR Power Plant , 1977 .

[18]  W Wong,et al.  LNG Power Recovery , 1994 .

[19]  Julianne M. Klara HIGH -PERFORMANCE POWER SYSTEMS FOR THE NEAR-TERM AND BEYOND , 1994 .

[20]  Colin F. McDonald Enabling Technologies for Nuclear Gas Turbine (GT-MHR) Power Conversion System , 1994 .

[21]  G. Krey,et al.  Utilization of the Cold by LNG Vaporization With Closed-Cycle Gas Turbine , 1980 .

[22]  A. Agazzani,et al.  Advanced Solar Dynamic Space Power Systems, Part I: Efficiency and Surface Optimization , 1995 .

[23]  Colin F. McDonald,et al.  The key role of heat exchangers in advanced gas-cooled reactor plants , 1994 .

[24]  Julianne M. Klara,et al.  ADVANCED POWER GENERATION:THE POTENTIAL OF INDIRECTLY-FIRED COMBINED CYCLES , 1995 .

[25]  A. Agazzani,et al.  Advanced Solar Dynamic Space Power Systems, Part II: Detailed Design and Specific Parameters Optimization , 1995 .

[26]  Aristide Massardd,et al.  Combined Closed Cycle (C3) Systems for Underwater Power Generation , 1992 .

[27]  A. F. Massardo,et al.  A tool for thermoeconomic analysis and optimization of gas, steam, and combined plants , 1997 .