Effect of Pin Diameter Degressive Gradient on Heat Transfer in a Microreactor with Non-Uniform Pin-Fin Array under Low Reynolds Number Conditions

To improve the efficiency of hydrogen-producing microreactors with non-uniform pin-fin array, the influence of the pin diameter degressive gradient of the non-uniform pin-fin array (NPFA) on heat transfer and pressure drop characteristics is analyzed in this study via numerical simulation under low Reynolds number conditions. Because correlations in prior studies cannot be used to predict the Nusselt number and pressure drop in the NPFA, new heat transfer and friction factor correlations are developed in this paper to account for the effect of the pin diameter degressive gradient, providing a method for the optimized design of the pin diameter degressive gradient for a microreactor with NPFA. The results show that the Nusselt number and friction factor under a low Reynolds number are quite sensitive to the pin diameter degressive gradient. Based on the new correlations, the exponents of the pin diameter degressive gradient for the friction factor and Nusselt number were 6.9 and 2.1, respectively, indicating the significant influence of the pin diameter degressive gradient on the thermal and hydrodynamic characteristics in the NPFA structure.

[1]  A. Zukauskas.  Heat Transfer from Tubes in Crossflow , 1972 .

[2]  Frank T. Smith,et al.  A structure for laminar flow past a bluff body at high Reynolds number , 1985, Journal of Fluid Mechanics.

[3]  Shi-Chune Yao,et al.  Crossflow Heat Transfer in Tube Bundles at Low Reynolds Numbers , 1986 .

[4]  J. Armstrong,et al.  A Review of Staggered Array Pin Fin Heat Transfer for Turbine Cooling Applications , 1987 .

[5]  M. Chyu.  Heat Transfer and Pressure Drop for Short Pin-Fin Arrays With Pin-Endwall Fillet , 1989 .

[6]  Jenn-Jiang Hwang,et al.  Heat Transfer and Pressure Drop in Pin-Fin Trapezoidal Ducts , 1999 .

[7]  Donald C. Price,et al.  Performance of pin fin cast aluminum coldwalls, Part 2: Colburn j-factor correlations , 2002 .

[8]  Donald C. Price,et al.  Performance of Pin Fin Cast Aluminum Coldwalls, Part 1: Friction Factor Correlations , 2002 .

[9]  Yogendra Joshi,et al.  Effect of Tip Clearance on the Thermal and Hydrodynamic Performance of a Shrouded Pin Fin Array , 2003 .

[10]  Peter Pfeifer,et al.  Hydrogen production from propane in Rh-impregnated metallic microchannel reactors and alumina foams , 2005 .

[11]  R. Prasher,et al.  Nusselt Number and Friction Factor of Staggered Arrays of Low Aspect Ratio Micropin-Fins Under Cross Flow for Water as Fluid , 2007 .

[12]  Kwang Ho Song,et al.  Development of the integrated methanol fuel processor using micro-channel patterned devices and its performance for steam reforming of methanol , 2007 .

[13]  Weilin Qu,et al.  Liquid Single-Phase Flow in an Array of Micro-Pin-Fins—Part II: Pressure Drop Characteristics , 2008 .

[14]  Lijun Yu,et al.  Simulation of Performance Influencing Factors of Proton Exchange Membrane Fuel Cells in Different Flow Modes , 2008 .

[15]  W. Qu,et al.  Liquid Single-Phase Flow in an Array of Micro-Pin-Fins—Part I: Heat Transfer Characteristics , 2008 .

[16]  Yogendra Joshi,et al.  Heat transfer and fluid flow in shrouded pin fin arrays with and without tip clearance , 2009 .

[17]  Jianli Hu,et al.  An overview of hydrogen production technologies , 2009 .

[18]  Rufino M. Navarro,et al.  Hydrogen production from renewable sources: biomass and photocatalytic opportunities , 2009 .

[19]  Wei-Mon Yan,et al.  Transport phenomena and performance of a plate methanol steam micro-reformer with serpentine flow field design , 2010 .

[20]  S. Rowshanzamir,et al.  Review of the proton exchange membranes for fuel cell applications , 2010 .

[21]  Minqiang Pan,et al.  Oriented linear cutting fiber sintered felt as an innovative catalyst support for methanol steam reforming , 2011 .

[22]  Yongping Yang,et al.  Numerical simulation of configuration and catalyst-layer effects on micro-channel steam reforming of methanol , 2011 .

[23]  Yildiz Bayazitoglu,et al.  Optimization of short micro pin fins in minichannels , 2012 .

[24]  Minqiang Pan,et al.  Factors influencing methanol steam reforming inside the oriented linear copper fiber sintered felt , 2012 .

[25]  Chin-Hsiang Cheng,et al.  Optimal design of parallel channel patterns in a micro methanol steam reformer , 2012 .

[26]  Miao Qian,et al.  Effects of structural parameters on the performance of a micro-reactor with micro-pin-fin arrays (MPFAR) for hydrogen production , 2012 .

[27]  Miao Qian,et al.  A micro-reactor with micro-pin-fin arrays for hydrogen production via methanol steam reforming , 2012 .

[28]  Danilo Vrtačnik,et al.  Si based methanol catalytic micro combustor for integrated steam reformer applications , 2012 .

[29]  G. P. Peterson,et al.  Hydrogen production by methanol steam reforming in a disc microreactor with tree-shaped flow architectures , 2013 .

[30]  Miao Qian,et al.  A performance study of methanol steam reforming in an A-type microchannel reactor , 2014 .

[31]  Miao Qian,et al.  Effect of tip clearance on the heat transfer and pressure drop performance in the micro-reactor with micro-pin–fin arrays at low Reynolds number , 2014 .

[32]  Wei Zhou,et al.  Laser micro-milling of microchannel on copper sheet as catalyst support used in microreactor for hydrogen production , 2014 .

[33]  Wei Zhou,et al.  Hydrogen production from methanol steam reforming using porous copper fiber sintered felt with gradient porosity , 2015 .

[34]  Weilin Qu,et al.  Pressure drop of water flow across a micro-pin–fin array part 1: Isothermal liquid single-phase flow , 2015 .

[35]  Guodong Xia,et al.  Effects of different geometric structures on fluid flow and heat transfer performance in microchannel heat sinks , 2015 .

[36]  Miao Qian,et al.  Fluid flow and heat transfer performance in a micro-reactor with non-uniform micro-pin-fin arrays for hydrogen production at low Reynolds number , 2017 .

[37]  Rakesh Kumar,et al.  Optimization of micro pin-fin heat sink with staggered arrangement , 2017 .

[38]  Hongyan Zhai,et al.  Experimental study of heat transfer performance of a tube with different shaped pin fins , 2018 .

[39]  Yi-Xin Su,et al.  Fractional Order Fuzzy PID Control of Automotive PEM Fuel Cell Air Feed System Using Neural Network Optimization Algorithm , 2019, Energies.