Inhomogeneity of Microstructure along the Thickness Direction in Stir Zone of Friction Stir Welded Duplex Stainless Steel

[1]  H. Miura,et al.  Role of ferrite and austenite phases on the deformation behavior and mechanical properties in heterogeneous nanostructured duplex stainless steel aged at different temperatures , 2022, Journal of Materials Science.

[2]  Yifu Shen,et al.  Inhomogeneous microstructure and properties along the thickness of stir zone in friction stir welded SAF 2507 super duplex stainless steel joint , 2022, Journal of Manufacturing Processes.

[3]  Hajime Yamamoto,et al.  Alloying a topmost steel-plate layer with WC-tool constituent elements during friction stir processing , 2021 .

[4]  K. Ushioda,et al.  Microstructures and tensile properties of friction stir welded 0.2%C–Si–Mn steel , 2021, Materials Science and Engineering: A.

[5]  Xiaoguo Song,et al.  Enhancement in mechanical properties and corrosion resistance of 2507 duplex stainless steel via friction stir processing , 2020, Journal of Materials Research and Technology.

[6]  Flávio José da Silva,et al.  Rapid precipitation of intermetallic phases during isothermal treatment of duplex stainless steel joints produced by friction stir welding , 2020 .

[7]  S. Emami,et al.  Effect of friction stir welding parameters on the microstructure and microtexture evolution of SAF 2205 stainless steel , 2019, Journal of Alloys and Compounds.

[8]  N. Tsuji,et al.  Nature of dynamic ferrite transformation revealed by in-situ neutron diffraction analysis during thermomechanical processing , 2019, Scripta Materialia.

[9]  S. Emami,et al.  Microstructural evolution of friction stir welded SAF 2205 duplex stainless steel , 2018 .

[10]  I. Balasundar,et al.  On the microstructure evolution in friction stir processed 2507 super duplex stainless steel and its effect on tensile behaviour at ambient and elevated temperatures , 2018 .

[11]  R. Misra,et al.  Microstructrual evolution and mechanical properties of the stir zone during friction stir processing a lean duplex stainless steel , 2017 .

[12]  J. Lippold,et al.  Detailed Microstructural Characterization and Restoration Mechanisms of Duplex and Superduplex Stainless Steel Friction-Stir-Welded Joints , 2016, Journal of Materials Engineering and Performance.

[13]  H. Fujii,et al.  Stability of the retained austenite in low-alloyed transformation induced plasticity-aided steels during friction stir welding , 2016 .

[14]  Arshad Noor Siddiquee,et al.  Experimental investigation on deformation and wear of WC tool during friction stir welding (FSW) of stainless steel , 2014, The International Journal of Advanced Manufacturing Technology.

[15]  M. Knyazeva,et al.  Duplex Steels: Part I: Genesis, Formation, Structure , 2013, Metallography, Microstructure, and Analysis.

[16]  T. Shobu,et al.  Static Tensile Deformation Behavior of a Lean Duplex Stainless Steel Studied by In Situ Neutron Diffraction and Synchrotron Radiation White X-rays , 2013 .

[17]  H. Assadi,et al.  On the formation of grain structure during friction stir welding of duplex stainless steel , 2010 .

[18]  H. Assadi,et al.  Effect of friction stir welding speed on the microstructure and mechanical properties of a duplex stainless steel , 2008 .

[19]  H. Kokawa,et al.  Microstructural evolution during friction stir-processing of pure iron , 2008 .

[20]  Hidetoshi Fujii,et al.  Friction stir welding of carbon steels , 2006 .

[21]  Tracy W. Nelson,et al.  Microstructure and mechanical properties of friction stir welded SAF 2507 super duplex stainless steel , 2005 .

[22]  Yutaka S. Sato,et al.  Rapid formation of the sigma phase in 304 stainless steel during friction stir welding , 2003 .

[23]  Rajiv S. Mishra,et al.  Friction Stir Welding and Processing , 2007 .

[24]  K. Ishida,et al.  Computer simulation of grain growth in dual-phase structures , 1999 .

[25]  K. Ishida,et al.  Examination of the Zener Relationship between Grain Size and Particle Dispersion , 1997 .

[26]  K. Tsuzaki,et al.  High Strain Rate Superplasticity and Role of Dynamic Recrystallization in Duplex Stainless Steel , 1990 .

[27]  Y. Matsumura,et al.  Evolution of Ultrafine-grained Ferrite in Hot Successive Deformation , 1987 .

[28]  K. Ameyama,et al.  Morphology and Crystallography of the Precipitation of Austenite at Ferrite Grain Boundaries in Two-Phase Stainless Steel , 1986 .

[29]  K. Ishida,et al.  Grain Growth in Duplex Stainless Steels , 1984 .

[30]  T. Nishizawa,et al.  Grain Growth in Dual-Phase Steel , 1982 .

[31]  T. Gladman.  On the theory of the effect of precipitate particles on grain growth in metals , 1966, Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences.

[32]  J. Mackenzie,et al.  SECOND PAPER ON STATISTICS ASSOCIATED WITH THE RANDOM DISORIENTATION OF CUBES , 1958 .