An artificial neural network‐based condition monitoring method for wind turbines, with application to the monitoring of the gearbox

Major failures in wind turbines are expensive to repair and cause loss of revenue due to long downtime. Condition-based maintenance, which provides a possibility to reduce maintenance cost, has been made possible because of the successful application of various condition monitoring systems in wind turbines. New methods to improve the condition monitoring system are continuously being developed. Monitoring based on data stored in the supervisory control and data acquisition (SCADA) system in wind turbines has received attention recently. Artificial neural networks (ANNs) have proved to be a powerful tool for SCADA-based condition monitoring applications. This paper first gives an overview of the most important publications that discuss the application of ANN for condition monitoring in wind turbines. The knowledge from these publications is utilized and developed further with a focus on two areas: the data preprocessing and the data post-processing. Methods for filtering of data are presented, which ensure that the ANN models are trained on the data representing the true normal operating conditions of the wind turbine. A method to overcome the errors from the ANN models due to discontinuity in SCADA data is presented. Furthermore, a method utilizing the Mahalanobis distance is presented, which improves the anomaly detection by considering the correlation between ANN model errors and the operating condition. Finally, the proposed method is applied to case studies with failures in wind turbine gearboxes. The results of the application illustrate the advantages and limitations of the proposed method.

[1]  Yingning Qiu,et al.  Applying thermophysics for wind turbine drivetrain fault diagnosis using SCADA data , 2016 .

[2]  Naim Baydar,et al.  Detection of Gear Deterioration Under Varying Load Conditions by Using the Instantaneous Power Spectrum , 2000 .

[3]  Andrew Kusiak,et al.  Analyzing bearing faults in wind turbines: A data-mining approach , 2012 .

[4]  Yingning Qiu,et al.  Wind turbine SCADA alarm analysis for improving reliability , 2012 .

[5]  Miguel Ángel Sanz Bobi,et al.  SIMAP: Intelligent System for Predictive Maintenance: Application to the health condition monitoring of a windturbine gearbox , 2006 .

[6]  Yaoyu Li,et al.  A review of recent advances in wind turbine condition monitoring and fault diagnosis , 2009, 2009 IEEE Power Electronics and Machines in Wind Applications.

[7]  Shuangwen Sheng,et al.  Wind Turbine Gearbox Condition Monitoring Round Robin Study - Vibration Analysis , 2012 .

[8]  Kenneth Levenberg.  A METHOD FOR THE SOLUTION OF CERTAIN NON – LINEAR PROBLEMS IN LEAST SQUARES , 1944 .

[9]  Wenxian Yang,et al.  Wind turbine condition monitoring by the approach of SCADA data analysis , 2013 .

[10]  D. Marquardt.  An Algorithm for Least-Squares Estimation of Nonlinear Parameters , 1963 .

[11]  Mohammad Bagher Menhaj,et al.  Training feedforward networks with the Marquardt algorithm , 1994, IEEE Trans. Neural Networks.

[12]  Lionel Tarassenko.  Design, training and testing of the prototype , 1998 .

[13]  J. H. Ward.  Hierarchical Grouping to Optimize an Objective Function , 1963 .

[14]  Daniel Karlsson.  Wind Turbine Performance Monitoring using Artificial Neural Networks With a Multi-Dimensional Data Filtering Approach , 2015 .

[15]  Mehrshad Salmasi,et al.  Comparison of Feed-Forward and Recurrent Neural Networks in Active Cancellation of Sound Noise , 2011, 2011 International Conference on Multimedia and Signal Processing.

[16]  Ming Yang,et al.  A wavelet approach to fault diagnosis of a gearbox under varying load conditions , 2010 .

[17]  Meik Schlechtingen,et al.  Wind turbine condition monitoring based on SCADA data using normal behavior models. Part 2: Application examples , 2014, Appl. Soft Comput..

[18]  B. Stephen,et al.  Wind Turbine Condition Assessment Through Power Curve Copula Modeling , 2012, IEEE Transactions on Sustainable Energy.

[19]  Paul Fleming,et al.  Use of SCADA Data for Failure Detection in Wind Turbines , 2011 .

[20]  Haritza Camblong,et al.  Diagnosis and fault signature analysis of a wind turbine at a variable speed , 2009 .

[21]  A. Kusiak,et al.  Monitoring Wind Farms With Performance Curves , 2013, IEEE Transactions on Sustainable Energy.

[22]  David Infield,et al.  Online wind turbine fault detection through automated SCADA data analysis , 2009 .

[23]  Hermann Ney,et al.  Comparison of feedforward and recurrent neural network language models , 2013, 2013 IEEE International Conference on Acoustics, Speech and Signal Processing.

[24]  Sofiane Achiche,et al.  Wind turbine condition monitoring based on SCADA data using normal behavior models. Part 1: System description , 2013, Appl. Soft Comput..

[25]  Yongqian Liu,et al.  Smart Monitoring of Wind Turbines Using Neural Networks , 2009 .

[26]  Yingning Qiu,et al.  Monitoring wind turbine gearboxes , 2013 .

[27]  Simon Haykin,et al.  Neural Networks and Learning Machines , 2010 .

[28]  Lina Bertling Tjernberg,et al.  An Artificial Neural Network Approach for Early Fault Detection of Gearbox Bearings , 2015, IEEE Transactions on Smart Grid.