Adaptive friction compensation of electromechanical servo system based on LuGre model

Aerospace electromechanical servo system is a typical strongly nonlinear and coupling system, where the nonlinear friction is the main factor that impacts the performance. As the conventional closed loop controller can not meet the high performance requirements, an adaptive friction compensation method based on LuGre model is proposed in this paper. For the unknown dynamic friction parameters and load characteristics of the electromechanical servo system, the forming principle and characteristics of the friction is analyzed. After that, the method is designed through Lyapunov stability analysis, a dual-closed loop observer is constructed to estimate the friction state variables and the friction model parameters are identified online. The experiment results show that the proposed compensation method can effectively inhibit the adverse influence of the friction on the servo system, significantly improve the control precision of the system, and lay the foundation for the improvement of high dynamic tracking performance of the servo system.

[1]  Leonid B. Freidovich,et al.  LuGre-Model-Based Friction Compensation , 2010, IEEE Transactions on Control Systems Technology.

[2]  Zhen Zhang,et al.  High precision tracking control of a servo gantry with dynamic friction compensation. , 2016, ISA transactions.

[3]  Chai Tianyou.  ADAPTIVE FUZZY CONTROL METHOD FOR DYNAMIC FRICTION COMPENSATION , 2005 .

[4]  Bin Yao,et al.  Adaptive robust control of linear motors with dynamic friction compensation using modified LuGre model , 2009, Autom..

[5]  Selçuk Erkaya,et al.  Modeling and simulation of joint clearance effects on mechanisms having rigid and flexible links , 2014 .

[6]  K. Khorasani,et al.  Adaptive friction compensation based on the Lyapunov scheme , 1996, Proceeding of the 1996 IEEE International Conference on Control Applications IEEE International Conference on Control Applications held together with IEEE International Symposium on Intelligent Contro.

[7]  贾宏光 Jia Hong-guang,et al.  Identification and compensation of nonlinearity for electromechanical actuator servo system , 2013 .

[8]  Brian Armstrong-Hélouvry,et al.  Control of machines with friction , 1991, The Kluwer international series in engineering and computer science.

[9]  Jun Ishikawa,et al.  Friction compensation using time variant disturbance observer based on the LuGre model , 2012, 2012 12th IEEE International Workshop on Advanced Motion Control (AMC).

[10]  Huang Jin,et al.  Effect and compensation for servo systems using LuGre friction model , 2008 .

[11]  Wang Cheng-hu.  Nonlinear dynamic characteristics for a rudder structure system with dry friction and clearance , 2013 .

[12]  Zhao Yanzheng.  Method of friction compensation based on disturbance observer in inertial platform , 2008 .

[13]  Tan Wenbin.  Adaptive Friction Compensation Based on LuGre Model , 2012 .

[14]  Mario R. Sobczyk,et al.  A continuous version of the LuGre friction model applied to the adaptive control of a pneumatic servo system , 2016, J. Frankl. Inst..

[15]  Frank L. Lewis,et al.  Neural network approximation of piecewise continuous functions: application to friction compensation , 1997, Proceedings of 12th IEEE International Symposium on Intelligent Control.