Wideband compact directive metasurface enabled pair of slot antennas

A simple novel compact wideband directive metasurface (MS) enabled antenna is proposed. Two same dimensions of edge fed slots are used to excite the MS layer which is made of a periodic arrangement of a rectangular loop-based unit cell. An optimised resonant slot fed at the edge with a simple micro-strip line together with the epsilon very large MS layer exhibits wideband behaviour. The antenna yields a bandwidth from 5.89 to 6.6 GHz for a voltage standing wave ratio < 2 (12%) compared with a measured fractional bandwidth of 14%. A maximum broadside directivity of 10.5 dBi has been achieved. Simulated efficiency is more than 87%. The measurements characteristics of this antenna are in agreement with simulated results.

[1]  T. I. Yuk,et al.  Frequency-Reconfigurable Antenna Using Metasurface , 2014, IEEE Transactions on Antennas and Propagation.

[2]  T. I. Yuk,et al.  Linear-to-Circular Polarization Conversion Using Metasurface , 2013, IEEE Transactions on Antennas and Propagation.

[3]  N. Behdad,et al.  A wide-band slot antenna design employing a fictitious short circuit concept , 2005, IEEE Transactions on Antennas and Propagation.

[4]  E. Li,et al.  A Unique Extraction of Metamaterial Parameters Based on Kramers–Kronig Relationship , 2010, IEEE Transactions on Microwave Theory and Techniques.

[5]  Kin‐Lu Wong,et al.  Bandwidth enhancement of a microstrip-line-fed printed wide-slot antenna , 2001 .

[6]  Paolo Burghignoli,et al.  Combinations of low/high permittivity and/or permeability substrates for highly directive planar metamaterial antennas , 2007 .

[7]  T. I. Yuk,et al.  Design of Polarization Reconfigurable Antenna Using Metasurface , 2014, IEEE Transactions on Antennas and Propagation.