In-situ fabrication of three-dimensional porous structure Mn-based catalytic filter for low-temperature NO reduction with NH3

[1]  Yan Yao,et al.  Develop high efficient of NH3-SCR catalysts with wide temperature range by ball-milled method , 2020 .

[2]  S. Baykara,et al.  Calcium silicate-based catalytic filters for partial oxidation of methane and biogas mixtures: Preliminary results , 2020 .

[3]  Ming Zhang,et al.  Exploring the effect of economic and environment factors on PM2.5 concentration: A case study of the Beijing-Tianjin-Hebei region. , 2020, Journal of environmental management.

[4]  Zhaojun Wang,et al.  Indoor PM2.5 concentrations during winter in a severe cold region of China: A comparison of passive and conventional residential buildings , 2020 .

[5]  Lina Han,et al.  Improved Activity and SO2 Resistance by Sm-Modulated Redox of MnCeSmTiOx Mesoporous Amorphous Oxides for Low-Temperature NH3-SCR of NO , 2020 .

[6]  Jiaxing Liu,et al.  Low temperature high activity of M (M = Ce, Fe, Co, Ni) doped M-Mn/TiO2 catalysts for NH3-SCR and in situ DRIFTS for investigating the reaction mechanism , 2020 .

[7]  Fengxian Li,et al.  Enhancement of the NH3-SCR property of Ce-Zr-Ti by surface and structure modification with P , 2020 .

[8]  Huiwen Huang,et al.  Isolated Sn on mesoporous silica as a highly stable and selective catalyst for the propane dehydrogenation , 2020 .

[9]  Jian Liu,et al.  Highly Active Monolith Catalysts of LaKCoO3 Perovskite-type Complex Oxide on Alumina-washcoated Diesel Particulate Filter and the Catalytic Performances for the Combustion of Soot , 2020 .

[10]  Jiawei Tian,et al.  Temporal evolution characteristics of PM2.5 concentration based on continuous wavelet transform. , 2020, The Science of the total environment.

[11]  M. Kong,et al.  Promotional effects of nitrogen doping on catalytic performance over manganese-containing semi-coke catalysts for the NH3-SCR at low temperatures. , 2019, Journal of hazardous materials.

[12]  Jian Yang,et al.  V2O5-modified Mn-Ce/AC catalyst with high SO2 tolerance for low-temperature NH3-SCR of NO , 2019, Chemical Engineering Journal.

[13]  Jingfang Sun,et al.  Enhancing the deNO performance of MnO /CeO2-ZrO2 nanorod catalyst for low-temperature NH3-SCR by TiO2 modification , 2019, Chemical Engineering Journal.

[14]  Baodan Liu,et al.  In-situ fabrication of noble metal modified (Ce, Zr)O2−δ monolithic catalysts for CO oxidation , 2019, Applied Surface Science.

[15]  Tao Wu,et al.  Promotion effect and mechanism of the addition of Mo on the enhanced low temperature SCR of NOx by NH3 over MnOx/γ-Al2O3 catalysts , 2019, Applied Catalysis B: Environmental.

[16]  Mindong Chen,et al.  Mn-Ce-Nb-O /P84 catalytic filters prepared by a novel method for simultaneous removal of particulates and NO , 2019, Journal of Rare Earths.

[17]  Y. Long,et al.  Fabrication of Ultrafine PPS Fibers with High Strength and Tenacity via Melt Electrospinning , 2019, Polymers.

[18]  Jihai Tang,et al.  Mesoporous Mn–Ti amorphous oxides: a robust low-temperature NH3-SCR catalyst , 2018 .

[19]  S. Bartling,et al.  Synergistic effect of VOx and MnOx surface species for improved performance of V2O5/Ce0.5Ti0.5−xMnxO2−δ catalysts in low-temperature NH3-SCR of NO , 2018 .

[20]  Xinyong Li,et al.  Inductive Effect Boosting Catalytic Performance of Advanced Fe1–xVxOδ Catalysts in Low-Temperature NH3 Selective Catalytic Reduction: Insight into the Structure, Interaction, and Mechanisms , 2018, ACS Catalysis.

[21]  Yuying Zheng,et al.  MnO2-Fe2O3 catalysts supported on polyphenylene sulfide filter felt by a redox method for the low-temperature NO reduction with NH3 , 2018 .

[22]  Yuying Zheng,et al.  Fabrication of Mn-CeOx/polyphenylene sulfide functional composites by an in situ reaction for low-temperature NO reduction with NH3 , 2017 .

[23]  Yanming Cui,et al.  In situ preparation of mesoporous Fe/TiO 2 catalyst using Pluronic F127-assisted sol-gel process for mid-temperature NH 3 selective catalytic reduction , 2017 .

[24]  Petr Stehlík,et al.  The treatment of waste gas from fertilizer production - An industrial case study of long term removing particulate matter with a pilot unit , 2016 .

[25]  Yasser Jangjou,et al.  Study of NO Formation During NH3 Oxidation Reaction Over a Cu-SAPO-34 SCR catalyst , 2016, Catalysis Letters.

[26]  S. Kerisit,et al.  XPS determination of Mn oxidation states in Mn (hydr)oxides , 2016 .

[27]  Bo Yang,et al.  Influencing factors on low-temperature deNOx performance of Mn–La–Ce–Ni–Ox/PPS catalytic filters applied for cement kiln , 2015 .

[28]  Yuying Zheng,et al.  MnO2 catalysts uniformly decorated on polyphenylene sulfide filter felt by a polypyrrole-assisted method for use in the selective catalytic reduction of NO with NH3 , 2014 .

[29]  Xinyong Li,et al.  Effect of zirconium on the structure and activity of Cu/Ti 1-xZr xO 2 catalysts for selective catalytic reduction of NO with C 3H 6 , 2012 .

[30]  N. Yan,et al.  Low temperature selective catalytic reduction of NO with NH3 over Mn–Fe spinel: Performance, mechanism and kinetic study , 2011 .

[31]  Yue Liu,et al.  Low-temperature selective catalytic reduction of NO with NH(3) over Mn-Ce oxides supported on TiO2 and Al2O3: a comparative study. , 2010, Chemosphere.

[32]  Y. Rhee,et al.  Removal characteristics of nitrogen oxide of high temperature catalytic filters for simultaneous removal of fine particulate and NOx , 2009 .