A review of some operation and maintenance issues of CFBC boilers

Abstract Circulating Fluidized Bed (CFB) technology has emerged as the most favoured steam generation technology in recent times. The use of CFB boilers is growing exponentially, due to its attractive features such as fuel flexibility, stable operation and low acid gas emissions, to name a few. The design of CFB boilers has developed over the years to meet the demanding availability expectations of the utilities. Proactive operation and maintenance (O&M) helps improve availability and reduce operating costs, which form a crucial component of the final steam cost of the boiler plant. This paper studies some important O&M issues of CFB boilers particularly looking into issues related to components specific to CFB boilers and the methods to avoid them. Operational difficulties like agglomeration, gas refluxing, back-sifting and performance related issues like emission control and bed temperature control are also examined. Refractory failure, which accounts for a considerable portion of the maintenance cost often forces shutdowns. This review is based on compilation of O&M issues of CFB boiler as found mainly in the open literature, but some unpublished information are also included.

[1]  Prabir Basu,et al.  AN ANALYSIS OF LOOP SEAL OPERATIONS IN A CIRCULATING FLUIDIZED BED , 2000 .

[2]  P. Jansens,et al.  Biomass combustion in fluidized bed boilers: Potential problems and remedies , 2009 .

[3]  S. Andersson,et al.  EMISSIONS OF NITROUS OXIDE (N2O) FROM FLUIDIZED BED BOILERS , 1989 .

[4]  Junfu Lu,et al.  Determining Cyclone Particle Holdup by Pressure Drop for a CFB Boiler , 2007 .

[5]  Prabir Basu,et al.  Agglomeration of biomass fired fluidized bed gasifier and combustor , 2009 .

[6]  Rolf K. Eckhoff,et al.  Dust Explosion Prevention and Mitigation, Status and Developments in Basic Knowledge and in Practical Application , 2009 .

[7]  Mi-ran Kim,et al.  Prevention of bed agglomeration with iron oxide during fluidized bed incineration of refuse-derived fuels , 2009 .

[8]  Kim Dam-Johansen,et al.  Agglomeration Phenomena in Fluidized Bed Combustion of Straw , 1997 .

[9]  Larry L. Baxter,et al.  The implications of chlorine-associated corrosion on the operation of biomass-fired boilers , 2000 .

[10]  Mika Liukkonen,et al.  Low-cost Camera System for Online Estimation of Grain Size in Fluidized Bed , 2012 .

[11]  L. Swanson.  Linking maintenance strategies to performance , 2001 .

[12]  Junfu Lu,et al.  Operational Performance and Optimization of a 465t/h CFB Boiler in China , 2005 .

[13]  Rommert Dekker,et al.  Applications of maintenance optimization models : a review and analysis , 1996 .

[14]  Kumar Rayaprolu.  Boilers: A Practical Reference , 2012 .

[15]  B. Leckner,et al.  Emissions from a circulating and a stationary fluidized bed boiler: A comparison , 1987 .

[16]  Christer Karlsson,et al.  A 7 year long measurement period investigating the correlation of corrosion, deposit and fuel in a biomass fired circulated fluidized bed boiler , 2011 .

[17]  Vincenzo Cianci,et al.  DRY ASH COLLECTION AT COAL FIRED POWER PLANTS AND POTENTIAL FOR WTE FACILITIES , 2007 .

[18]  Jeff W. Kerner,et al.  Ash Cooling Screws—A Retrospective and Looking Ahead , 2003 .

[19]  Prabir Basu,et al.  Circulating Fluidized Bed Boilers: Design and Operations , 1991 .

[20]  P Gauvillé,et al.  Achievable combustion efficiency with Alstom CFB boilers for burning discarded coal , 2012 .

[21]  J. Stringer.  Practical experience with wastage at elevated temperatures in coal combustion systems , 1995 .

[22]  Kim Dam-Johansen,et al.  Combustion of Biomass in Fluidized Beds-Problems and Some Solutions Based on Danish Experiences , 2003 .

[23]  P. Basu.  Combustion and gasification in fluidized beds , 2006 .

[24]  Hairui Yang,et al.  Effect of Bed Pressure Drop on Performance of a CFB Boiler , 2009 .

[25]  T. Shimizu,et al.  Effect of sulfur dioxide removal by limestone on nitrogen oxide (NOx) and nitrous oxide emissions from a circulating fluidized bed combustor , 1992 .

[26]  Anders Nordin,et al.  Bed Agglomeration Characteristics during Fluidized Bed Combustion of Biomass Fuels , 2000 .

[27]  Buqian Wang,et al.  Erosion-corrosion of thermal sprayed coatings in FBC boilers , 1996 .

[28]  Jian-Qiang Gao,et al.  Analysis on the Bed Temperature Characteristics of 450t/h Circulating Fluidized Bed Boiler , 2005 .

[29]  R. Conn.  Laboratory techniques for evaluating ash agglomeration potential in petroleum coke fired circulating fluidized bed combustors , 1995 .

[31]  Prabir Basu,et al.  Heat transfer to walls of a circulating fluidized-bed furnace , 1996 .

[32]  Robert Schwartz,et al.  The John Zink Combustion Handbook , 2001 .

[33]  Peter Glarborg,et al.  Influence of process parameters on nitrogen oxide formation in pulverized coal burners , 1997 .

[34]  Shaukat A. Brah,et al.  Relationship between total productive maintenance and performance , 2004 .

[35]  John R. Grace,et al.  Wastage rate of water walls in a commercial circulating fluidized bed combustor , 2008 .