Some studies of the CRC for X-750 nickel alloy at different parametric setting

[1]  R. Khanna,et al.  Machining of Ti-6Al-4V biomedical alloy by WEDM: investigation and optimization of MRR and Rz using grey-harmony search , 2021, World Journal of Engineering.

[2]  S. Goyal,et al.  Comparative Measurements of Physical and Mechanical Properties of AA6082 Based Composites Reinforced with B4C and SiC Particulates Produced via Stir Casting , 2020, Metals and Materials International.

[3]  N. Sharma,et al.  Tribo-corrosion characterization of NiTiCu alloy for bio-implant applications , 2019, Materials Research Express.

[4]  N. Sharma,et al.  Multi-quality characteristics optimisation on WEDM for Ti-6Al-4V using Taguchi-grey relational theory , 2019, International Journal of Machining and Machinability of Materials.

[5]  Tadeusz Mikolajczyk,et al.  Parametric optimization and process capability analysis for machining of nickel-based superalloy , 2019, The International Journal of Advanced Manufacturing Technology.

[6]  Catalin Iulian Pruncu,et al.  Machinability Investigations of Inconel-800 Super Alloy under Sustainable Cooling Conditions , 2018, Materials.

[7]  Kamal Kumar,et al.  Surface modification of WC-Co alloy using Al and Si powder through WEDM: A thermal erosion process , 2018 .

[8]  S. Chan,et al.  Parametric study on the dry sliding wear behaviour of AA6082–T6/TiB2 in situ composites using response surface methodology , 2018 .

[9]  Kamal Kumar,et al.  Mechanical characteristics and bioactivity of porous Ni50−xTi50Cux (x = 0, 5 and 10) prepared by P/M , 2018 .

[10]  Mariusz Deja,et al.  Application of Rapid Prototyping Technology in the Manufacturing of Turbine Blade With Small Diameter Holes , 2018 .

[11]  Mozammel Mia,et al.  Modeling and optimization of tool wear in MQL-assisted milling of Inconel 718 superalloy using evolutionary techniques , 2018, The International Journal of Advanced Manufacturing Technology.

[12]  S. Goyal,et al.  Parametric study of the dry sliding wear behaviour of AA6082-T6/SiC and AA6082-T6/B4C composites using RSM , 2018 .

[13]  Kamal Kumar,et al.  Post-Processing of NiTi Alloys: Issues and Challenges , 2018, Powder Metallurgy and Metal Ceramics.

[14]  Kamal Kumar,et al.  Physical and tribological characteristics of porous NiTi SMA fabricated by powder metallurgy , 2017 .

[15]  Neeraj Sharma,et al.  An experimental investigation and optimization of friction stir welding process for AA6082 T6 (cryogenic treated and untreated) using an integrated approach of Taguchi, grey relational analysis and entropy method , 2016 .

[16]  N. Sharma,et al.  WEDM process variables investigation for HSLA by response surface methodology and genetic algorithm , 2015 .

[17]  Neeraj Sharma,et al.  Modeling and Parametric Investigation of WEDM for D-2 Tool Steel Using RSM and GA , 2014 .

[18]  T. A. El-Taweel,et al.  Modelling the machining parameters of wire electrical discharge machining of Inconel 601 using RSM , 2005 .

[19]  N. Bharat,et al.  MACHINABILITY OF EN 24 STEEL (817M40) , 2019 .

[20]  N. Sharma,et al.  GA-based optimisation using RSM in WEDM of Nimonic-90: a nickel-based super alloy , 2018 .

[21]  Neeraj Sharma,et al.  Modelling the WEDM Process Parameters for Cryogenic Treated D-2 Tool Steel by Integrated RSM and GA , 2014 .

[22]  Yuebin B. Guo,et al.  Surface Integrity Characteristics in Wire-EDM of Inconel 718 at Different Discharge Energy , 2013 .

[23]  Neeraj Sharma,et al.  Multi Quality Characteristics Of WEDM Process Parameters with RSM , 2013 .