Influence of passive potential on the electronic property of the passive film formed on Ti in 0.1 M HCl solution during ultrasonic cavitation.

[1]  D. G. Li.  Effect of ultrasonic cavitation on the diffusivity of a point defect in the passive film on formed Nb in 0.5 M HCl solution. , 2015, Ultrasonics sonochemistry.

[2]  P. Liang,et al.  Ultrasonic cavitation erosion of Ti in 0.35% NaCl solution with bubbling oxygen and nitrogen. , 2015, Ultrasonics sonochemistry.

[3]  K. Chung,et al.  Improvement in cavitation erosion resistance of AISI 316L stainless steel by friction stir processing , 2014 .

[4]  Xian-Jin Yang,et al.  Surface modification by gas nitriding for improving cavitation erosion resistance of CP-Ti , 2014 .

[5]  Jiadao Wang,et al.  Influence of potentiostatic aging, temperature and pH on the diffusivity of a point defect in the passive film on Nb in an HCl solution , 2012 .

[6]  S. Hattori,et al.  Cavitation erosion of silver plated coatings in a low-temperature environment , 2012 .

[7]  W. Ke,et al.  Cavitation erosion–corrosion behaviour of CrMnB stainless overlay and 0Cr13Ni5Mo stainless steel in 0.5 M NaCl and 0.5 M HCL solutions , 2008 .

[8]  D. Macdonald,et al.  The passivity of Type 316L stainless steel in borate buffer solution , 2008 .

[9]  A. Krella,et al.  Cavitation erosion resistance of nanocrystalline TiN coating deposited on stainless steel , 2008 .

[10]  Jinhua Zhu,et al.  Influence of ultrasonic cavitation on passive film of stainless steel. , 2008, Ultrasonics sonochemistry.

[11]  V. Wesling,et al.  Cavitation erosion resistance of Ti6Al4V laser alloyed with TiC-reinforced dual phase intermetallic matrix composites , 2007 .

[12]  SeJin Ahn,et al.  Analysis of Repassivation Kinetics of Ti Based on the Point Defect Model , 2006 .

[13]  K. Lundgren,et al.  A Mixed-Conduction Model for the Oxidation of Stainless Steel in a High-Temperature Electrolyte Estimation of Kinetic Parameters of Oxide Layer Growth and Restructuring , 2005 .

[14]  G. Cragnolino,et al.  Effect of palladium on the corrosion behavior of titanium , 2004 .

[15]  SeJin Ahn,et al.  Photoelectrochemical analysis on the passive film formed on Ti in pH 8.5 buffer solution , 2003 .

[16]  Z. Cui,et al.  Cavitation erosion behavior of laser gas nitrided Ti and Ti6Al4V alloy , 2003 .

[17]  V. H. Marynin.  Erosion of Vacuum-Arc Ti–N Coatings , 2003 .

[18]  D. Macdonald,et al.  Nature of the passive film on nickel , 2002 .

[19]  M. Musiani,et al.  Characterisation of the surface films formed on Nb during electrodissolution in aqueous alkali , 2002 .

[20]  C. Brett,et al.  Characterisation of passive films formed on mild steels in bicarbonate solution by EIS , 2002 .

[21]  T. Shih,et al.  Phase transformation in austempered ductile iron by microjet impact , 2002 .

[22]  K. Sridharan,et al.  Wear-Corrosion Comparisons of Passivating vs Nonpassivating Alloys in Aerated 3.5% Aqueous Solutions of Sodium Chloride , 2001 .

[23]  P. Kinnunen,et al.  Electrochemical study of the passive behaviour of Ni–Cr alloys in a borate solution—a mixed-conduction model approach , 2001 .

[24]  M. Seo,et al.  Changes in electrochemical properties of the anodic oxide film formed on titanium during potential sweep , 2001 .

[25]  J. Carlsson,et al.  An electrochemical quartz crystal microbalance and in situ SFM study of Ti in sulphuric acid , 2001 .

[26]  D. Blackwood.  Influence of the space-charge region on electrochemical impedance measurements on passive oxide films on titanium , 2000 .

[27]  Sergio Trasatti,et al.  Electrocatalysis: understanding the success of DSA® , 2000 .

[28]  M. Seo,et al.  Changes in the properties of anodic oxide films formed on titanium during long-term immersion in deaerated neutral solutions , 2000 .

[29]  G. Sundholm,et al.  Coupling between ionic defect structure and electronic conduction in passive films on iron, chromium and iron-chromium alloys , 2000 .

[30]  I. L. Muller,et al.  Characterization of the film formed on iron in borate solution by electrochemical impedance spectroscopy , 2000 .

[31]  W. Tabakoff.  Erosion resistance of superalloys and different coatings exposed to particulate flows at high temperature , 1999 .

[32]  Marystela Ferreira,et al.  Semiconducting Properties of Passive Films Formed on Stainless Steels Influence of the Alloying Elements , 1998 .

[33]  J. Pan,et al.  EIS and XPS study of surface modification of 316LVM stainless steel after passivation. , 1998 .

[34]  M. Bojinov.  The ability of a surface charge approach to describe barrier film growth on tungsten in acidic solutions , 1997 .

[35]  K. Kohlhof,et al.  Cavitation protection by low temperature TiCN coatings , 1995 .

[36]  T. Shibata,et al.  The effect of film formation conditions on the structure and composition of anodic oxide films on titanium , 1995 .

[37]  R. Bell,et al.  Composition and structure of the anodic films on titanium in aqueous solutions , 1993 .

[38]  J. Augustynski.  The role of the surface intermediates in the photoelectrochemical behaviour of anatase and rutile TiO2 , 1993 .

[39]  K. Jüttner.  Electrochemical impedance spectroscopy (EIS) of corrosion processes on inhomogeneous surfaces , 1990 .

[40]  J. L. Ord,et al.  Electrochemical and Optical Properties of Anodic Oxide Films on Titanium , 1989 .

[41]  U. Stimming,et al.  Photoelectrochemical Investigations of Passive Films on Titanium Electrodes , 1986 .

[42]  H. Strehblow,et al.  XPS and ISS examinations of electrode surfaces and passive layers with a specimen transfer in a closed system , 1986 .

[43]  U. Stimming.  Photoelectrochemical studies of passive films , 1986 .

[44]  G. Horowitz.  Capacitance-voltage measurements and flat-band potential determination on Zr-doped α-Fe2O3 single-crystal electrodes , 1983 .

[45]  H. Finklea.  The Preparation of TiO2 Electrodes with Minimum Mott‐Schottky Frequency Dispersion , 1982 .

[46]  F. Cardon,et al.  On the Interpretation of Mott‐Schottky Plots Determined at Semiconductor/Electrolyte Systems , 1975 .

[47]  K. J. Vetter.  General kinetics of passive layers on metals , 1971 .