Optimization of the sputtering process parameters of GZO films using the Grey–Taguchi method

Abstract This paper examines the optimization of the process parameters of GZO films deposited on polyethylene terephthalate substrates by R.F. magnetron sputtering using the Taguchi method, aiming to obtain highly transparent and conductive films. The influences of the various sputtering factors (R.F. power, sputtering pressure, deposition time, substrate temperature and post-annealing temperature) on electrical resistivity and structural, morphological and optical transmittance of GZO films are analyzed. The electrical resistivity and the optical transmittance of GZO films were improved by post-annealing the substrate during the deposition process. Experimental results indicate the optimal process parameters in GZO films deposited on polyethylene terephthalate substrates can be determined effectively. The electrical resistivity of GZO films is decreased from 1.194 × 10 −3  Ω cm to 8.627 × 10 −4  Ω cm and the optical transmittance is increased from 86.148% to 90%, leading to multiple performance characteristics in deposition qualities through the Grey–Taguchi method.

[1]  Jow-Lay Huang,et al.  The effect of thickness on the properties of Ti-doped ZnO films by simultaneous r.f. and d.c. magnetron sputtering , 2005 .

[2]  K. Chattopadhyay,et al.  Low-temperature deposition of ZnO thin films on PET and glass substrates by DC-sputtering technique , 2006 .

[3]  Sang Yeol Lee,et al.  Effect of rapid thermal annealing on electrical and optical properties of Ga doped ZnO thin films prepared at room temperature , 2006 .

[4]  K. Ellmer.  Resistivity of polycrystalline zinc oxide films: current status and physical limit , 2001 .

[5]  R. Gordon,et al.  Atmospheric pressure chemical vapor deposition of gallium doped zinc oxide thin films from diethyl zinc, water, and triethyl gallium , 1992 .

[6]  Elvira Fortunato,et al.  Performances presented by zinc oxide thin films deposited by r.f. magnetron sputtering , 2002 .

[7]  T. Kamiya,et al.  Optical and electrical properties of amorphous zinc tin oxide thin films examined for thin film transistor application , 2008 .

[8]  T. R. Bement,et al.  Taguchi techniques for quality engineering , 1995 .

[9]  Shinzo Takata,et al.  Group III Impurity Doped Zinc Oxide Thin Films Prepared by RF Magnetron Sputtering , 1985 .

[10]  Jin Ma,et al.  Thickness dependence of properties of ZnO:Ga films deposited by rf magnetron sputtering , 2005 .

[11]  D. Basak,et al.  Effect of thermal annealing treatment on structural, electrical and optical properties of transparent sol–gel ZnO thin films , 2005 .

[12]  H. Makino,et al.  Effects of substrate temperature on crystallinity and electrical properties of Ga-doped ZnO films prepared on glass substrate by ion-plating method using DC arc discharge , 2007 .

[13]  Liping Zhu,et al.  Substrate temperature dependence of the properties of Ga-doped ZnO films deposited by DC reactive magnetron sputtering , 2007 .

[14]  K. Cheong,et al.  Electrical and optical studies of ZnO:Ga thin films fabricated via the sol-gel technique , 2002 .

[15]  Alberto Piqué,et al.  Effect of film thickness on the properties of indium tin oxide thin films , 2000 .

[16]  Jin Ma,et al.  Influence of annealing on the properties of ZnO:Ga films prepared by radio frequency magnetron sputtering , 2005 .

[17]  John H. Sheesley,et al.  Quality Engineering in Production Systems , 1988 .

[18]  B. Cullity,et al.  Elements of X-ray diffraction , 1957 .

[19]  Thomas K. L. Tong,et al.  Multi-criteria material selections and end-of-life product strategy: Grey relational analysis approach , 2007 .

[20]  K. L. Chopra,et al.  Annealing studies of undoped and indium-doped films of zinc oxide , 1984 .

[21]  E. Fortunato,et al.  Growth of ZnO:Ga thin films at room temperature on polymeric substrates: thickness dependence , 2003 .

[22]  Chia-Ming Chang,et al.  The use of grey-based Taguchi methods to determine submerged arc welding process parameters in hardfacing , 2002 .

[23]  J. Deng,et al.  Introduction to Grey system theory , 1989 .

[24]  Elvira Fortunato,et al.  Influence of the deposition pressure on the properties of transparent and conductive ZnO: Ga thin-film produced by r.f. sputtering at room temperature , 2003 .

[25]  K. P. Ramesh,et al.  Influence of substrate temperature on surface structure and electrical resistivity of the evaporated tin sulphide films , 2006 .

[26]  Pedro Barquinha,et al.  Influence of post-annealing temperature on the properties exhibited by ITO, IZO and GZO thin films , 2007 .

[27]  K. Chiang,et al.  Optimization of the WEDM process of particle-reinforced material with multiple performance characteristics using grey relational analysis , 2006 .

[28]  C. Hsu,et al.  Effects of ZnO buffer layer on the optoelectronic performances of GZO films , 2008 .

[29]  Madhan Shridhar Phadke,et al.  Quality Engineering Using Robust Design , 1989 .

[30]  E. Fortunato,et al.  Production and characterization of zinc oxide thin films for room temperature ozone sensing , 2002 .