Nanofibrillated cellulose composite hydrogel for the replacement of the nucleus pulposus.

The swelling and compressive mechanical behavior as well as the morphology and biocompatibility of composite hydrogels based on Tween® 20 trimethacrylate (T3), N-vinyl-2-pyrrolidone (NVP) and nanofibrillated cellulose (NFC) were assessed in the present study. The chemical structure of T3 was verified by Fourier transform infrared spectroscopy and proton nuclear magnetic resonance, and the degree of substitution was found to be around 3. Swelling ratios of neat hydrogels composed of different concentrations of T3 and NVP were found to range from 1.5 to 5.7 with decreasing concentration of T3. Various concentrations of cellulose nanofibrils (0.2-1.6wt.%) were then used to produce composite hydrogels that showed lower swelling ratios than neat ones for a given T3 concentration. Neat and composite hydrogels exhibited a typical nonlinear response under compression. All composite hydrogels showed an increase in elastic modulus compared to neat hydrogel of about 3- to 8-fold, reaching 18kPa at 0% strain and 62kPa at 20% strain for the hydrogel with the highest NFC content. All hydrogels presented a porous and homogeneous structure, with interconnected pore cells of around 100nm in diameter. The hydrogels are biocompatible. The results of this study demonstrate that composite hydrogels reinforced with NFC may be viable as nucleus pulposus implants due to their adequate swelling ratio, which may restore the annulus fibrosus loading, and their increased mechanical properties, which could possibly restore the height of the intervertebral discs.

[1]  A. Hoffman.  Hydrogels for Biomedical Applications , 2001, Advanced drug delivery reviews.

[2]  F. Cavalieri,et al.  Study of gelling behavior of poly(vinyl alcohol)-methacrylate for potential utilizations in tissue replacement and drug delivery. , 2004, Biomacromolecules.

[3]  E. Ledet,et al.  New developments in nucleus pulposus replacement technology. , 2004, The spine journal : official journal of the North American Spine Society.

[4]  Hidemitsu Furukawa,et al.  Swelling-induced modulation of static and dynamic fluctuations in polyacrylamide gels observed by scanning microscopic light scattering. , 2003, Physical review. E, Statistical, nonlinear, and soft matter physics.

[5]  V C Mow,et al.  The viscoelastic behavior of the non-degenerate human lumbar nucleus pulposus in shear. , 1997, Journal of biomechanics.

[6]  Thomas Geiger,et al.  Cellulose Fibrils for Polymer Reinforcement , 2004 .

[7]  D. Seliktar,et al.  Protein-polymer conjugates for forming photopolymerizable biomimetic hydrogels for tissue engineering. , 2007, Biomaterials.

[8]  S. Ferguson,et al.  Biomechanics of the aging spine , 2003, European Spine Journal.

[9]  W. Hennink,et al.  Synthesis, characterization, and polymerization of glycidyl methacrylate derivatized dextran , 1995 .

[10]  C. van Nostrum,et al.  Novel crosslinking methods to design hydrogels. , 2002, Advanced drug delivery reviews.

[11]  R. Molloy,et al.  Cytotoxicity study of homopolymers and copolymers of 2-hydroxyethyl methacrylate and some alkyl acrylates for potential use as temporary skin substitutes , 2003, Journal of materials science. Materials in medicine.

[12]  A. Vaccaro,et al.  Nucleus pulposus replacement: an emerging technology. , 2005, The spine journal : official journal of the North American Spine Society.

[13]  Martin A. Hubbe.  ARE LIGNOCELLULOSIC RESOURCES TOO VALUABLE TO BURN , 2008 .

[14]  J. H. Lee,et al.  Swelling behavior and network structure of hydrogels synthesized using controlled UV‐initiated free radical polymerization , 2008 .

[15]  Vijay K Goel,et al.  Artificial disc prosthesis: design concepts and criteria. , 2004, The spine journal : official journal of the North American Spine Society.

[16]  Kentaro Abe,et al.  Review: current international research into cellulose nanofibres and nanocomposites , 2010, Journal of Materials Science.

[17]  L. Bonassar,et al.  Biomechanical and biochemical characterization of composite tissue-engineered intervertebral discs. , 2006, Biomaterials.

[18]  Sally Roberts,et al.  Elastic fibre organization in the intervertebral discs of the bovine tail , 2002, Journal of anatomy.

[19]  L. Drzal,et al.  PREPARATION AND PROPERTIES OF MICROFIBRILLATED CELLULOSE POLYVINYL ALCOHOL COMPOSITE MATERIALS , 2008 .

[20]  F. Horkay,et al.  Structure-Property Relationships of Photopolymerizable Poly(Ethylene Glycol) Dimethacrylate Hydrogels , 2005 .

[21]  Abhijeet Joshi,et al.  Functional compressive mechanics of a PVA/PVP nucleus pulposus replacement. , 2006, Biomaterials.

[22]  Martin A. Hubbe,et al.  PAPER’S APPEARANCE: A REVIEW , 2008 .

[23]  D. Kaplan,et al.  Bacterial cellulose as a potential scaffold for tissue engineering of cartilage. , 2005, Biomaterials.

[24]  Hansen A. Yuan,et al.  Prosthetic disc replacement: the future? , 2002, Clinical orthopaedics and related research.

[25]  S. Garfin,et al.  History and evolution of disc replacement. , 2004, The spine journal : official journal of the North American Spine Society.

[26]  K. R. Sandberg,et al.  Microfibrillated cellulose, a new cellulose product: properties, uses, and commercial potential , 1983 .

[27]  Sally Roberts,et al.  Degeneration of the intervertebral disc , 2003, Arthritis research & therapy.

[28]  J. Galante.  Tensile properties of the human lumbar annulus fibrosus. , 1967, Acta orthopaedica Scandinavica.

[29]  G. Hadziioannou,et al.  From high molecular weight precursor polyrotaxanes to supramolecular sliding networks. The ‘sliding gels’ , 2005 .

[30]  Manohar M. Panjabi,et al.  Clinical Biomechanics of the Spine , 1978 .

[31]  H A Yuan,et al.  The artificial disc: theory, design and materials. , 1996, Biomaterials.

[32]  W. Hennink,et al.  Copolymers of 2-(dimethylamino)ethyl methacrylate with ethoxytriethylene glycol methacrylate or N-vinyl-pyrrolidone as gene transfer agents. , 2000, Journal of controlled release : official journal of the Controlled Release Society.

[33]  K. Kawanabe,et al.  The biocompatibility and osteoconductivity of a cement containing beta-TCP for use in vertebroplasty. , 2006, Journal of biomedical materials research. Part A.

[34]  D. Anderson,et al.  Molecular pathogenic factors in symptomatic disc degeneration. , 2005, The spine journal : official journal of the North American Spine Society.

[35]  Dawn M. Elliott,et al.  Material properties in unconfined compression of human nucleus pulposus, injectable hyaluronic acid-based hydrogels and tissue engineering scaffolds , 2007, European Spine Journal.

[36]  Jindřich Kopeček,et al.  Hydrogels: From soft contact lenses and implants to self‐assembled nanomaterials , 2009 .

[37]  Yunxiao Liu,et al.  Hydrogel based on interpenetrating polymer networks of dextran and gelatin for vascular tissue engineering. , 2009, Biomaterials.

[38]  D. Pioletti,et al.  Non-linear viscoelastic laws for soft biological tissues , 2000 .

[39]  I. Krupa,et al.  Mechanical properties of silica hydrogels prepared and aged at physiological conditions: testing in the compression mode , 2010 .

[40]  Keita Ito,et al.  Fluid flow and convective transport of solutes within the intervertebral disc. , 2004, Journal of biomechanics.

[41]  F. Rannou,et al.  Disque intervertébral et structures voisines de la colonne lombaire : anatomie, biologie, physiologie et biomécanique , 2006 .

[42]  Yoshimi Tanaka,et al.  Novel hydrogels with excellent mechanical performance , 2005 .

[43]  M. Aebi,et al.  The human lumbar intervertebral disc: evidence for changes in the biosynthesis and denaturation of the extracellular matrix with growth, maturation, ageing, and degeneration. , 1996, The Journal of clinical investigation.