Design and Control of a Real-Time Variable Modulus Vibration Isolator

A magnetorheological elastomer (MRE-based semi-active (SA) vibration isolator is developed and tested in real-time with a SA controller, illustrating the feasibility of MRE-based isolators. While several researchers have applied MREs to tunable vibration absorbers (TVAs), little work has been done using MREs in primary isolation systems. Further, in cases where TVAs were developed, few SA controllers were implemented in proof of concept experiments. This article presents a magnetically biased MRE-based vibration isolator, which enables the device to have a fail-safe operation in the event of a power failure. To test the effectiveness of the MRE isolator, a SA controller is developed to minimize the payload velocity. A comparison by simulation of variable modulus and damping systems is also presented. Finally, experimental results are given, showing that the MRE isolator and SA controller system reduce resonances and payload velocities by 16-30% when compared to passive systems.

[1]  Neil D. Sims,et al.  Hardware-in-the-loop simulation of magnetorheological dampers for vehicle suspension systems , 2007 .

[2]  P. Campbell.  Permanent Magnet Materials and their Application: Applications , 1994 .

[3]  Seung-bok Choi,et al.  Control and Response Characteristics of a Magneto-Rheological Fluid Damper for Passenger Vehicles , 2000 .

[4]  H. E. Tseng,et al.  Hybrid model predictive control application towards optimal semi-active suspension , 2006 .

[5]  Xinglong Gong,et al.  Fabrication and characterization of isotropic magnetorheological elastomers , 2005 .

[6]  Billie F. Spencer,et al.  Large-scale MR fluid dampers: modeling and dynamic performance considerations , 2002 .

[7]  Mattias Lokander,et al.  Improving the magnetorheological effect in isotropic magnetorheological rubber materials , 2003 .

[8]  S. Opie,et al.  Design and control of a vibration isolator using a biased magnetorheological elastomer , 2008 .

[9]  Larry Dean Elie,et al.  Controllable-stiffness components based on magnetorheological elastomers , 2000, Smart Structures.

[10]  Kenneth A. Cunefare,et al.  Performance of MRE-based Vibration Absorbers , 2008 .

[11]  Huaxia Deng,et al.  Adaptive Tuned Vibration Absorber based on Magnetorheological Elastomer , 2007 .

[12]  K. H. J. Buschow,et al.  Permanent-Magnet Materials and Their Applications , 1999 .

[13]  Zvi Rigbi,et al.  The response of an elastomer filled with soft ferrite to mechanical and magnetic influences , 1983 .

[14]  Melek Yalcintas,et al.  Vibration suppression capabilities of magnetorheological materials based adaptive structures , 2004 .

[15]  オーリ．マーティン,et al.  Steering column for a motor vehicle , 2008 .

[16]  G. Zhou,et al.  Complex shear modulus of a magnetorheological elastomer , 2004 .

[17]  J. Carlson,et al.  A model of the behaviour of magnetorheological materials , 1996 .