Active damage localization for plate-like structures using wireless sensors and a distributed algorithm

Wireless structural health monitoring (SHM) systems have emerged as a promising technology for robust and cost-effective structural monitoring. However, the applications of wireless sensors on active diagnosis for structural health monitoring (SHM) have not been extensively investigated. Due to limited energy sources, battery-powered wireless sensors can only perform limited functions and are expected to operate at a low duty cycle. Conventional designs are not suitable for sensing high frequency signals, e.g. in the ultrasonic frequency range. More importantly, algorithms to detect structural damage with a vast amount of data usually require considerable processing and communication time and result in unaffordable power consumption for wireless sensors. In this study, an energy-efficient wireless sensor for supporting high frequency signals and a distributed damage localization algorithm for plate-like structures are proposed, discussed and validated to supplement recent advances made for active sensing-based SHM. First, the power consumption of a wireless sensor is discussed and identified. Then the design of a wireless sensor for active diagnosis using piezoelectric sensors is introduced. The newly developed wireless sensor utilizes an optimized combination of field programmable gate array (FPGA) and conventional microcontroller to address the tradeoff between power consumption and speed requirement. The proposed damage localization algorithm, based on an energy decay model, enables wireless sensors to be practically used in active diagnosis. The power consumption for data communication can be minimized while the power budget for data processing can still be affordable for a battery-powered wireless sensor. The Levenberg–Marquardt method is employed in a mains-powered sensor node or PC to locate damage. Experimental results and discussion on the improvement of power efficiency are given.

[1]  Åke Björck,et al.  Numerical methods for least square problems , 1996 .

[2]  Jerome P. Lynch,et al.  Embedding damage detection algorithms in a wireless sensing unit for operational power efficiency , 2004 .

[3]  Christian Boller,et al.  Next generation structural health monitoring and its integration into aircraft design , 2000, Int. J. Syst. Sci..

[4]  F. Yuan,et al.  Damage Detection of a Plate Using Migration Technique , 2001 .

[5]  Jerome P. Lynch,et al.  A summary review of wireless sensors and sensor networks for structural health monitoring , 2006 .

[6]  Fuh-Gwo Yuan,et al.  Wireless sensors with dual-controller architecture for active diagnosis in structural health monitoring , 2008 .

[7]  Fu-Kuo Chang,et al.  Identifying Delamination in Composite Beams Using Built-In Piezoelectrics: Part I—Experiments and Analysis , 1995 .

[8]  Ian F. Akyildiz,et al.  Wireless sensor networks: a survey , 2002, Comput. Networks.

[9]  Gyuhae Park,et al.  Development of an impedance-based wireless sensor node for structural health monitoring , 2007 .

[10]  Francesco Marcelloni,et al.  Reducing Power Consumption in Wireless Sensor Networks Using a Novel Approach to Data Aggregation , 2008, Comput. J..

[11]  Lei Wang,et al.  Active damage localization technique based on energy propagation of Lamb waves , 2007 .

[12]  E. Crawley,et al.  Use of piezoelectric actuators as elements of intelligent structures , 1987 .

[13]  F. Yuan,et al.  Transient wave propagation of isotropic plates using a higher-order plate theory , 2005 .

[14]  F. Yuan,et al.  Diagnostic Lamb waves in an integrated piezoelectric sensor/actuator plate: analytical and experimental studies , 2001 .

[15]  Hoon Sohn,et al.  Damage diagnosis using time series analysis of vibration signals , 2001 .

[16]  W. Press,et al.  Numerical Recipes in C++: The Art of Scientific Computing (2nd edn)1 Numerical Recipes Example Book (C++) (2nd edn)2 Numerical Recipes Multi-Language Code CD ROM with LINUX or UNIX Single-Screen License Revised Version3 , 2003 .

[17]  Daniel J. Inman,et al.  A wireless active sensing system for impedance-based Structural Health Monitoring , 2005 .

[18]  Jerome P. Lynch.  Design of a wireless active sensing unit for localized structural health monitoring , 2005 .

[19]  Charles R. Farrar,et al.  Embedding actuation functionalities in a wireless structural health monitoring system , 2004 .

[20]  Shahram Latifi,et al.  A survey on data compression in wireless sensor networks , 2005, International Conference on Information Technology: Coding and Computing (ITCC'05) - Volume II.

[21]  David E. Culler,et al.  Mica: A Wireless Platform for Deeply Embedded Networks , 2002, IEEE Micro.

[22]  Victor Giurgiutiu,et al.  Electro-Mechanical Impedance Method for Crack Detection in Thin Plates , 2001 .

[23]  Elizabeth M. Belding-Royer,et al.  A review of current routing protocols for ad hoc mobile wireless networks , 1999, IEEE Wirel. Commun..

[24]  Victor Giurgiutiu,et al.  Piezoelectric Wafer Embedded Active Sensors for Aging Aircraft Structural Health Monitoring , 2002 .