Percolation threshold study of a plastic–elastomeric matrix based composite material for bipolar plates in proton exchange membrane fuel cells

Bipolar plate materials play an important role in designing a cost-effective fuel cell. This research aims to develop a polymer matrix based composite bipolar plate material for proton exchange membrane fuel cells. The polymers investigated are a vinyl ester resin (VER) and two elastomers including polyurethane (PU) and ethylene–propylene–diene monomer (EPDM). The VER alone and the blend of VER with either PU or EPDM makes the one-phase, one-phase blend, or two-phase blend matrices. These matrices will be incorporated within the conductive fillers including Cytec DKD carbon fiber (DKD), Asbury synthetic graphite grade 4012 flake (4012), and grade TC 307 high-surface flake (307). A percolation threshold study was conducted and two-phase blend matrix can achieve lower percolation thresholds. The composite material with 65 vol.% of two-phase bend matrix (60 vol.% VER and 40 vol.% EPDM), and 35 vol.% of conductive fillers (21 vol.% DKD, 5 vol.% 4012 and 9 vol.% 307) is found to have low electrical properties with improved mechanical properties.

[1]  S. Tsai,et al.  Composite Materials: Design and Applications , 2002 .

[2]  James Larminie,et al.  Fuel Cell Systems Explained , 2000 .

[3]  Eg G Technical Services Fuel Cell Handbook , 2006 .

[4]  Mohammed H Al-Saleh,et al.  An innovative method to reduce percolation threshold of carbon black filled immiscible polymer blends , 2008 .

[5]  Hsu-Chiang Kuan,et al.  Preparation, electrical, mechanical and thermal properties of composite bipolar plate for a fuel cell , 2004 .

[6]  Hyouk Ryeol Choi,et al.  Solvent-assisted graphite loading for highly conductive phenolic resin bipolar plates for proton exchange membrane fuel cells , 2010 .

[7]  Theodore M. Besmann,et al.  Carbon/Carbon Composite Bipolar Plate for Proton Exchange Membrane Fuel Cells , 2000 .

[8]  M. Huneault,et al.  Electrically conductive thermoplastic blends for injection and compression molding of bipolar plates in the fuel cell application , 2004 .

[9]  R. Yuan,et al.  The effect of particle size gradation of conductive fillers on the conductivity and the flexural strength of composite bipolar plate , 2008 .

[10]  Allen M. Hermann,et al.  Bipolar plates for PEM fuel cells: A review , 2005 .

[11]  James Larminie,et al.  Fuel Cell Systems Explained: Larminie/Fuel Cell Systems Explained , 2003 .

[12]  Viral S. Mehta,et al.  Review and analysis of PEM fuel cell design and manufacturing , 2003 .

[13]  Xia Wang,et al.  Synergy Effects of Conductive Fillers on Elastomer Graphite Composite Material for PEM Fuel Cell Bipolar Plates , 2010 .

[14]  Volkmar Ett,et al.  Carbon materials in composite bipolar plates for polymer electrolyte membrane fuel cells: A review o , 2011 .

[15]  P. Kauranen,et al.  Injection moulding of graphite composite bipolar plates , 2006 .

[16]  A. B. Strong,et al.  Plastics: Materials and Processing , 1996 .

[17]  Matthew M. Mench,et al.  Fuel Cell Engines , 2008 .

[18]  Zhongying Shi,et al.  A numerical study of flow crossover between adjacent flow channels in a proton exchange membrane fuel cell with serpentine flow field , 2008 .

[19]  Jan-Chan Huang,et al.  Carbon black filled conducting polymers and polymer blends , 2002 .

[20]  J. Mcgrath,et al.  Development of fuel cell bipolar plates from graphite filled wet-lay thermoplastic composite materials , 2005 .

[21]  F. Smits Measurement of sheet resistivities with the four-point probe , 1958 .

[22]  B. Yi,et al.  Preparation and properties of thin epoxy/compressed expanded graphite composite bipolar plates for proton exchange membrane fuel cells , 2010 .

[23]  H. L. Stephens,et al.  Handbook of Elastomers , 2000 .

[24]  F. Gadala-Maria,et al.  Effect of shear on the electrical conductivity of suspensions of graphite in an unsaturated polyester resin , 2005 .

[25]  C. Ma,et al.  Preparation and Properties of High Performance Nanocomposite Bipolar Plate for Fuel Cell , 2006 .

[26]  L. Shaw,et al.  Electrical and mechanical behaviors of carbon nanotube-filled polymer blends , 2006 .

[27]  T. L. Dhami,et al.  Effect of different carbon fillers on the properties of graphite composite bipolar plate , 2008 .

[28]  Y. Run-zhang,et al.  Study on the electrical and mechanical properties of polyvinylidene fluroide/titanium silicon carbide composite bipolar plates , 2006 .

[29]  Hubert A. Gasteiger,et al.  Handbook of fuel cells : fundamentals technology and applications , 2003 .