Enhancing moulds manufacturing by means of reverse engineering

Modern CAD/CAM techniques together with five-axis high-speed milling allow to reduce moulds manufacturing time and costs. Nevertheless, in order to put a mould into use, operations of manual finishing and fitting are still always required. Such operations, performed manually by mould makers, modify the milled surfaces of moulds. Reverse engineering techniques can be employed in quality control to evaluate dimensions and geometrical tolerances on moulds after machining and fitting. Changes in the product’s shape are sometimes decided after a mould has already been machined. In such cases, if possible, the mould maker directly modifies the mould. Thus the final real geometry of the mould does not reflect the one of the original CAD model. The aim of this paper is to point out the benefits of non-contact quality control and to illustrate a procedure, based on reverse engineering techniques, to reconstruct and update the mathematical model of the mould after it has been polished and fit. The procedure was tested on a mould for the production of a plastic camera body that was previously inspected by means of a structured light scanner.

[1]  R.M.S.O. Baptista,et al.  Three and five axes milling of sculptured surfaces , 2000 .

[2]  Joaquim Salvi,et al.  Overview of coded light projection techniques for automatic 3D profiling , 2003, 2003 IEEE International Conference on Robotics and Automation (Cat. No.03CH37422).

[3]  Ralph R. Martin,et al.  Reverse engineering of geometric models - an introduction , 1997, Comput. Aided Des..

[4]  Yueh-Jaw Lin,et al.  An adaptive tool path generation algorithm for precision surface machining , 1998, Comput. Aided Des..

[5]  David K. Aspinwall,et al.  High speed machining of moulds and dies for net shape manufacture , 2000 .

[6]  David J. Whitehouse,et al.  Phase difference determination by fringe pattern matching , 1996 .

[7]  Seokbae Son,et al.  Automated laser scanning system for reverse engineering and inspection , 2002 .

[8]  Chuang-Jang Chiou,et al.  A machining potential field approach to tool path generation for multi-axis sculptured surface machining , 2002, Comput. Aided Des..

[9]  Jens Guehring,et al.  Dense 3D surface acquisition by structured light using off-the-shelf components , 2000, IS&T/SPIE Electronic Imaging.

[10]  Kwan H. Lee,et al.  Automated inspection planning of free-form shape parts by laser scanning , 2000 .

[11]  Nabil Gindy,et al.  Investigation of a 3D non‐contact measurement based blade repair integration system , 2005 .

[12]  Ming-Chih Huang,et al.  The processing of data points basing on design intent in reverse engineering , 2000 .

[13]  Yadong Li,et al.  Inspection of free-form shaped parts , 2005 .